nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

AddLayer only temporarily adds the layer to map

ChristianHHalsted

When I run the following code:

mxd = arcpy.mapping.MapDocument("CURRENT")
df = arcpy.mapping.ListDataFrames(mxd)[0]
addLayer = arcpy.mapping.Layer(r'G:\data_layers\political\Towns_Maine_polys.lyr')
arcpy.mapping.AddLayer(df, addLayer, "AUTO_ARRANGE")

from the Python Window in ArcMap it works fine. But when I put it in a script tool and run it from ArcToolbox I see the layer get added to the data frame but then it immediately disappears.
I've tried using InsertLayer but get the same result.

Any idea what is happening?

Vind meer berichten getagd met

Accepted answers

All comments

MathiasKP

These lines will add a layer with SP10.1:
mxd = arcpy.mapping.MapDocument("CURRENT")
df = arcpy.mapping.ListDataFrames(mxd)[0]
addLayer = arcpy.mapping.Layer(r'G:\data_layers\political\Towns_Maine_polys.lyr')
arcpy.mapping.AddLayer(df, addLayer, "AUTO_ARRANGE")

but if you try other things like using the Layer.replaceDataSource method the layer will disappear again. I have not tried all methods/properties combinations but they might fail as well as some of you have experienced.

/Mathias

WilsonIonara

I think it might not have to do with the lenght of the array collection. When I add another if clause ( else if (ac.length == 3)), that filter that I had before (when I typed "ref" and filtered two values to the array collection) stopped working. So it might have to do with the creation of another variable actually. I noticed that if I don't create qText4, then the filter for the two values work. So maybe the function is not executing anymore since when it filters to two values, it cannot get the third value and it therefore cannot create that 3rd variable that goes in the if clause. Do you have any idea why this is happening? Thanks!

 private function doSearch():void
   {
    myAttributeTable.refresh();
    myAttributeTable.visible = false
    ac = new ArrayCollection();
    ac.addItem({name:"Alpine",code:"AL"});
    ac.addItem({name:"Austin",code:"AU"});
    ac.addItem({name:"Referral - Consulting Forester",code:"RC"});
    ac.addItem({name:"Referral Vendor", code:"RV"});
    ac.addItem({name:"Incidental Rural Forestry",code:"AIR"});
    ac.addItem({name:"Prevention and Reduction of Pest Losses",code:"AP"});
    ac.addItem({name:"Forest Health Monitoring - Survey",code:"FHS"});
    myAttributeTable.featureLayer = myFeatureLayer
    
    
    myAttributeTable.featureLayer = yourTable
    myAttributeTable.visible = true
    
    
    ac.filterFunction = filter;
    ac.refresh()
    
    var itemname:String = ac.getItemAt(0).name
    Alert.show(itemname)
    var itemname1:String = ac.getItemAt(1).name
    Alert.show(itemname1)
    
    var qText2:String  = ac.getItemAt(0).code
   
    var qText3:String = ac.getItemAt(1).code
   
    var qText4:String = ac.getItemAt(2).code
    Alert.show(qText2)
  
    Alert.show(qText3)
    
    yourTable.refresh()
    
    
    if (ac.length == 1)
    {
     Alert.show("TEST AC LENGTH 1")
     var defexpr:String =  searchattribute +  "like" +  "'"  +  qText2  + "'";
     yourTable.definitionExpression = defexpr
     
     
    }
     
    else if (ac.length == 2)
    {
     
     Alert.show("TEST AC LENGTH 2")
     
     var defexpr2:String =  searchattribute +  eqsymbol +  "'"  +  qText2  + "'" + " OR " + searchattribute +  eqsymbol +  "'"  +  qText3  + "'";
     
     yourTable.definitionExpression = defexpr2
     
     
     myAttributeTable.featureLayer = yourTable
     myAttributeTable.visible = true
    }
    
    
    else if (ac.length == 3)
        {
         
         Alert.show("TEST AC LENGTH 3")
         
         var defexpr3:String =  searchattribute +  eqsymbol +  "'"  +  qText2  + "'" + " OR " + searchattribute +  eqsymbol +  "'"  +  qText3  + "'" + " OR " + searchattribute +  eqsymbol +  "'"  +  qText4  + "'";
         
         yourTable.definitionExpression = defexpr3
         Alert.show(defexpr3)
         
         myAttributeTable.featureLayer = yourTable
         myAttributeTable.visible = true
        }
    
    else if (ac.length > 2)
    {
     Alert.show("TEST AC LENGTH ELSE")
     myAttributeTable.visible = false
     Alert.show("Please review your search and try again")
    }
    
    
   }

WilsonIonara

Robert, can you tell me how I can change the code so the filter also works for filters that have only one value? For example, if I type "Ref", I get two values, so it works, I get the qText2 and qText3 (the codes used for the definition expression). However if I type "Vendor", I don't get the codes (confirmed by using the Alert.show method) but I can get the name (itemname, confirmed by the Alert.show method), and I don't get an alert to show that the array collection is of length = 1. I am guessing it is because the filter does not work if there is only one value on the array collection? Is it possible to change that? Here is my code. Thank you so much! This is great!

   
       [Bindable] private var ac:ArrayCollection;
   
   
   public function filter(item:Object):Boolean
   {
    var name:String = String(item["name"]);
    var beginsWithString:String = qText.text.toLowerCase();
    
    return name.toLowerCase().indexOf(beginsWithString) > -1;
    
   }
   
   
   private function doSearch():void
   {
    myAttributeTable.refresh();
    myAttributeTable.visible = false
    ac = new ArrayCollection();
    ac.addItem({name:"Alpine",code:"AL"});
    ac.addItem({name:"Austin",code:"AU"});
    ac.addItem({name:"Referral - Consulting Forester",code:"RC"});
    ac.addItem({name:"Referral Vendor", code:"RV"});
    ac.addItem({name:"Incidental Rural Forestry",code:"AIR"});
    ac.addItem({name:"Prevention and Reduction of Pest Losses",code:"AP"});
    ac.addItem({name:"Forest Health Monitoring - Survey",code:"FHS"});
    myAttributeTable.featureLayer = myFeatureLayer
    
   
    myAttributeTable.featureLayer = yourTable
    myAttributeTable.visible = true
      
    
    ac.filterFunction = filter;
    ac.refresh()
     
    var itemname:String = ac.getItemAt(0).name
    Alert.show(itemname)
    var itemname1:String = ac.getItemAt(1).name
    Alert.show(itemname1)
    
       var qText2:String  = ac.getItemAt(0).code
          var qText3:String = ac.getItemAt(1).code
    
    Alert.show(qText2)
    Alert.show(qText3)

    yourTable.refresh()
    
    
    if (ac.length == 1)
    {
     Alert.show("TEST AC LENGTH 1")
    var defexpr:String =  searchattribute +  "like" +  "'"  +  qText2  + "'";
    yourTable.definitionExpression = defexpr

  
    }
    
    else if (ac.length == 2)
    {
     
     Alert.show("TEST AC LENGTH 2")
     
     var defexpr2:String =  searchattribute +  eqsymbol +  "'"  +  qText2  + "'" + " OR " + searchattribute +  eqsymbol +  "'"  +  qText3  + "'";
    
     yourTable.definitionExpression = defexpr2
     
     
     myAttributeTable.featureLayer = yourTable
     myAttributeTable.visible = true
    }
    else if (ac.length > 2)
    {
     Alert.show("TEST AC LENGTH ELSE")
     myAttributeTable.visible = false
       Alert.show("Please review your search and try again")
    }
    
    
 }

AndrewTewkesbury

I'm also having this exact problem in 10.1 SP1. Does anyone know of a fix, or a patch?

WilsonIonara

Hi Wadim,

Did you figure out why this is happening? I have 10.1 sp1, and I am having the same problem. Thanks

WadimKlincov

Hi,

I'm very sorry, but I still get this error with 10.1 SP1.

def CreateTestLayer(self, img, trainshp):
        mxd = arcpy.mapping.MapDocument("CURRENT")
        df = arcpy.mapping.ListDataFrames(mxd, "Layers")[0]
        lyrFile = arcpy.mapping.Layer(img + '.lyr')
        arcpy.mapping.AddLayer(df, lyrFile)
        arcpy.MakeRasterLayer_management(img, "rdlayer", "#", trainshp , "1")
        mxd.save()

Any ideas on why it still disappears?

E: If there already is a layer, it adds new layers. But when I do not have any layers then they disappear again.

MikeHunter

Any confirmation this bug is fixed with 10SP1?

It seems to be fixed. I was getting the same behavior (layer quickly disappears) before loading sp1, now it works fine.

Mike

gis4fungis4fun

Any confirmation this bug is fixed with 10SP1?

ChrisMathers

SP1 isnt out yet. Its expected within the next 3 weeks according to our local rep.

TomWillis

According to the Resource Centre, this bug was fixed with Service Pack 1 for 10.0, and with version 10.1. Anyone know where to download SP1?

ChristianHHalsted

Turns out this is a known bug. [#NIM052741 Feature layer fails to persist in ArcMap table of contents when added through the AddLayer function in script tool] It was logged in final beta but a fix wasn't made for the final release.

Too bad, this is a pretty important method for map automation.

Doe mee aan het gesprek

Aangemelde leden kunnen berichten plaatsen, updates volgen en meer. Nieuw hier? Registreer een gratis account.

Snelle Links

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.