nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Power Automate - Flow Fout

MariusVerdes

Hallo iedereen,

Ik krijg een foutmelding bij het testen van een Power Automate Flow, je kunt de bijgevoegde screenshots zien. Ik heb verschillende velden uit de dynamische inhoud geprobeerd, maar niets lijkt te werken. Weet iemand wat hier het probleem kan zijn?

Als er meer details nodig zijn, laat het me dan weten.

P.S. "Trebuie furnizata o valoare pentru calea sursei" betekent "Er moet een waarde worden opgegeven voor het bronpad".

@IsmaelChivite @SeanKMcGinnis Kunnen jullie hier alsjeblieft naar kijken?

Alvast bedankt!

Vind meer berichten getagd met

Accepted answers

MariusVerdes

Hello everyone,

Finally, yesterday evening I was able to resolve the issue. For some reason I am not aware of, the report template was not correct on my second step of the flow (weird because I know very well that I selected the correct one). Basically, the issue was with step 2 of my flow, not the upload to OneDrive, which was failing because there was no content coming from the survey123 report.

Thank you very much for your suggestions. I learned my lesson from this experience.

All comments

MatthewReese

I am having an issue with "a value must be provided for source path". What type of edits are you making to the survery123 that was created?

RobertAnderson3

I run into this issue sometimes too, sometimes the Create Report fails and doesn't return anything (but it doesn't actually mark that action as failed?) so I put it in a do until to try a couple times, then return the error if no luck. I think it's just sometimes there are network errors when trying to create the report on the Automate/ArcGIS side. I catch the error and email myself that it failed, and cancel the flow so I can easily see which one it was in the history.

I find if I go into Power Automate and re-run the flow that failed it works.

BenWilkerson89

I get the same error from time to time. 90% of the time it works just fine but sometimes it gives me the same error message:

Action 'Upload_file_from_URL' failed: A value must be provided for source path.

The only way I am able to resolve this issue is when I go into Survey123 and make some edits on the survey that was created and then resubmit it.

MariusVerdes

Hello everyone,

Thank you very much for your suggestions. I learned my lesson from this experience.

MariusVerdes

Hi @DominicRobergeIADOT ,

I have similar settings as you. The only difference is that I am using a custom connector since I want this to work based on our ArcGIS Enterprise 11.1. I saw a few tutorials and this is how I built the flow. For the URL and name dynamics content I used the " x of the first result file".

DominicRobergeIADOT

Can you show us your Upload file from URL settings? I have a similar flow and below are my settings. This is working just fine for me

MariusVerdes

Hi @IsmaelChivite

Thank you very much for taking the time to reply to my situation. I will contact my IT department to see if this error is caused by something in our configuration.

Do you see another way of building to flow to achieve the same result?

IsmaelChivite

Hi @MariusVerdes

From the screenshots, I can see that you are using a custom Power Automate connector. For this reason, I think it will be best you work though this problem with Esri Technical Support as the problem may be related to specific network configuration in your organization.

Doe mee aan het gesprek

Aangemelde leden kunnen berichten plaatsen, updates volgen en meer. Nieuw hier? Registreer een gratis account.

Snelle Links

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.