nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Selecting Features and Highlighting a Table

GaryBarden

Could someone point me in the direction of information of how to select a feature on a map and having the corrisponding record highlight on a table? I'm using ArcServer 9.3.

Thank you,

Gary Barden

タグ付けされた投稿をもっと見る

Accepted answers

All comments

__Rich_

The effort required to upgrade our application, which I would suggest is reasonably complex/customised etc. was pretty much the square root of zero.

To put it another way, I'd get a second opinion.

I suppose it is possible that you might be dealing with something really special or perhaps written in an obscure way, I'm sure there's a consultant out there who could help the dev team out...for a fee...

TracySchloss

All of those instructions about the changes sound worse than they really are. Most of those changes would occur in your initial javascript section of code. Nothing in that sounds like you have to step through line by line within your functions.

GaryBarden

thanks for the feedback. It's been insightful to say the least...

JohnGravois

yup. that comes straight out of our help.

based on changes mentioned above, it will probably be necessary to load additional modules and ensure your application waits for all modules to load before firing code in order to upgrade to version 3.x. that being said, i haven't heard anyone say they had to rewrite existing application logic in order to upgrade.

GaryBarden

Here's the information I was provided on the changes.

Version 3.0 of the ArcGIS API uses Dojo 1.7, which made significant changes to several parts of Dojo. Notably, the loader supports AMD and continues to support module loading with the older dojo.require style. The organization of Dojo modules has changed as well.
Referencing Objects and Properties in the esri Namespace
All code that references the esri namespace needs to run after all modules loaded. Using dojo.ready/addOnLoad (as shown in all samples) guarantees that all modules are loaded. This includes setting properties on esri.config, like a proxy URL. Error messages like "Uncaught ReferenceError: esri is not defined" or "ReferenceError: esri is not defined" are likely a result of referencing the esri object before all modules have loaded.
Explicitly Requiring Modules
In some cases, it may be required to load additional modules to maintain the same functionality in an application when migrating from a 2.x release of the ArcGIS API for JavaScript to 3.0. For instance, the InfoWindow - Custom sample uses dojo.fx.Toggler to show and hide the custom info window. Pre-Dojo 1.7, this class was loaded automatically when dojo.fx was loaded. This is not the case at 1.7 and dojo.fx.Toggler must be explicitly required. This is shown in the JavaScript that defines the custom InfoWindow module.
Configuring Dojo to Load Custom Modules
Dojo's configuration for module loading is still specified as a data-dojo-config attribute on the script tag that references dojo or with a global variable named dojoConfig (or djConfig). Pre-1.7, the baseUrl and modulePaths properties were used to tell Dojo where to find custom modules. Again, using the InfoWindow - Custom sample, here is how dojoConfig looked pre-1.7:
dojoConfig = {
    parseOnLoad: true,
    baseUrl: "./",
    modulePaths: {
      "myModules": "./myModules"
    }
};

At 1.7, baseUrl and modulePaths are replaced by the packages property. The value for packages is an array of objects and each object maps a name to a location. When using a CDN hosted version of Dojo (which includes the ArcGIS API for JavaScript), the easiest way to specify a package's location is to use a regular expression to grab the path used by the application and reference your JavaScirpt files relative to that. This trick was pulled from the "Using Custom Modules with a CDN" Dojo tutorial linked below. Here's how dojoConfig looks for the InfoWindow - Custom sample when using version 3.0 of the ArcGIS API for JavaScript:
dojoConfig = {
    parseOnLoad: true,
    packages: [{
      "name": "myModules",
      "location": location.pathname.replace(/\/[^/]+$/, "") + "/myModules"
    }]
};

For more information on loading custom modules, please refer to these Dojo Tutorials:
�?� Defining Modules
�?� Configuring Dojo
�?� Using Custom Modules with a CDN
Using dojo.declare
Using dojo.declare in JavaScript that's not loaded by the loader (meaning a class is declared in a file referenced directly by a script tag, or inside a script tag in an html page) and not wrapped in a function called by dojo.ready does not work at Dojo 1.7. While this worked pre-1.7, it was never recommended. There are two recommended ways to address this:
�?� Re-factor application code to use the loader to load custom classes
�?� Wrap uses of dojo.declare in a function called by dojo.ready
Below is an example of wrapping a call to dojo.declare in a function called by dojo.ready:
dojo.ready(function() {
    dojo.declare("esri.layers.WebTileLayer", [esri.layers.TiledMapServiceLayer], {
      ...custom code here...
    });
});

For additional info on changes made at Dojo 1.7, please refer to the Dojo 1.7 release notes.

GaryBarden

Not exactly sure what changes, I was just told "major changes".

GaryBarden

The server part I was referring to was that I was told that in ArcServer 10 and older, the web server and ArcServer could be on the same machine, but with 10.1, they could not.

__Rich_

The dojo library went through some major changes and a lot of the work that was already done for our new app would have to be rewritten to use the new libraries.

Does that seem accurate?

Might seem an obvious question but:

Like what?

TracySchloss

That makes more sense than having to do something on your servers because of a new API. It depends too on whether or not you're trying to enhance existing code or whether you are starting from scratch. At some point you do end up biting the bullet and start using the newer versions. Sometimes it isn't as bad as you think to make the switch; you don't know until you try.

GaryBarden

This is response from our IT folks on why we're using API version 2.8 and the DOJO library version 1.6.

The new version of the JavaScript API is build on a new version of the dojo library. The dojo library went through some major changes and a lot of the work that was already done for our new app would have to be rewritten to use the new libraries.

Does that seem accurate?

TracySchloss

I've never heard of such a thing! I am still using ArcGIS server 9.3 (not even 9.3.1). The only issues at all I've had with some of the newest dojo or Javascript API has to do with the fact we are still running a rather old version of IE as our default browser internally. That has nothing at all to do with what we do or don't have on our servers.

GaryBarden

They say that migrating to the new API will require "a lot of work", related to upgrading servers and something about the web server must be on a separate machine....

JohnGravois

whats keeping them from migrating to the newest version of our API?

if you can't move to Dojo 1.7 and use a dgrid, you'd want to check out a sample like this.

GaryBarden

I just checked. The API is version 2.8 and the DOJO library is version 1.6. Any idea if this would prevent us from being able to develop this functionality?

GaryBarden

Thanks, these are great examples of what I want our app to do, but our develops are telling us it can't be done because they are using an older verion of the Java API and the Dojo library, but from the looks of it, these examples are a couple of years old, so we should be able to develop something like this.

JohnGravois

the sample demonstrates functionality available at version 3.2 of our JavaScript API. it uses a feature layer based on a 10.0 map service, but would work equally well with a 9.3 service.

(just as an fyi, if you want to know the version of ArcGIS Server which is hosting a service, just navigate from its REST URL to the associated services directory (see examples below). in the upper righthand corner of the page, the version of ArcGIS Server will be listed.)

service in use
http://server.arcgisonline.com/ArcGIS/rest/services/Demographics/USA_Median_Net_Worth/MapServer/4

REST service directory
http://server.arcgisonline.com/ArcGIS/rest/services/

EdwardHinkle

Here is an example of what you are wanting to do. If you have any questions after looking through the code, let us know.

http://www.arcgis.com/home/item.html?id=ec79bf76517843c6a1bb09740ef4a221

GaryBarden

I had not...is that version 9.3?

JohnGravois

have you seen this sample?

会話に参加する

サインインしたメンバーは投稿、更新のフォローなどができます。初めてですか？無料アカウントを登録してください。

クイックリンク

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.