GIS Proにおける設計降雨洪水

maryk43

こんにちは、

現在、GIS Proで設計降雨洪水（10年、50年、100年の降雨）をモデル化しようとしています。ArcHydro（およびSpatial Analyst>Hydro）ツールを学んでおり、非常に役立っていますが、これを設計降雨洪水マップに変換するにはまだ一歩足りません。理想的には、プログラムを切り替えずにこの降雨洪水をモデル化したいと考えています。私はGISProを使用しており、gisプラットフォーム内でgeoHec-RASを使用できません。私の会社は最新のGIS Proにアップグレードする作業を進めており、そのバージョンにはシミュレーションツールが含まれているはずです。しかし、この降雨深度がどのように適用されるのか見つけられませんでした - 単位流量曲線（unit hydrograph）で適用されるのでしょうか？

この目標に役立つ可能性のあるツールやプロセスで見落としているものはありますか？皆さんのご助力に感謝します！

MarkBoucher

I come at this from the engineering/hydrologist side. I've been learning GIS and Arc Hydro as I go.

I don't know of any tools for ESRI GIS programs (ArcMap/ArcGIS Pro) that will take rainfall and transform it into runoff (flow). [aka rainfall runoff (RR) transformation ]. I found this article in a quick search but it is academic and may not be ready for real-world application:  

https://www.sciencedirect.com/science/article/abs/pii/S235293852100063X. 

 

If someone knows how to do all of the hydrology and hydraulic (H&H) calculations inside an ESRI GIS program, let everyone know.

 

In using GIS to do this in our agency below are the general steps I am aware of. I have done all of these, but not yet from start to finish on one project.

1. Use Arc Hydro to delineate watersheds and gather input parameters for HEC-HMS. (HEC-HMS has some GIS capabilities built in, but it does not seem to have fully functional GIS tools yet. For example, it will tell you what the centroidalflowpath distance is, but will not display the centroidalflowpath for you to confirm - at least that was my limited experience. It may be possible to do the whole watershed characteristics and RR transformation in HEC-HMS. HEC-HMS will also deal with routing flows through reservoirs and down long reaches of streams/rivers.
2. Use HEC-HMS to calculate the flows (hydrology)
3. Use GIS to create inputs for HEC-RAS, likely using GeoRAS. (HEC-RAS has some very good GIS like functions in a sub-application that is started w/in HEC-RAS called RAS Mapper. HEC-RAS is also needed to model bridges.
4. Run model in HEC-RAS. (hydraulics) HEC-RAS can run a 1D using (cross sections: cross sections can be input from survey information or cut from a terrain model. The careless use of a terrain model should be avoided. [caution: LiDAR based terrain of a creek under tree cover can be very poor.] or a 2D model using a terrain model [note same caution]. The model is run and the output can be in a put in a form (layer/raster) that is readable by ESRI GIS programs.
5. Add the HEC-RAS output into GIS.

We have created flows in HEC-HMS and, using the standard HEC-DSS format for the HMS output, read from the DSS file directly into HEC-RAS (1D model) to run an unsteady hydraulic model to evaluate the creek capacity.