nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

なぜ私のDTMにはタイル効果があるのに、DSMにはないのでしょうか？そして、DTMからタイル効果を取り除くにはどうすればよいですか？

AnthonyDeLuca

皆さん、こんにちは。<\/P>

ある問題の解決を手伝っていただける方がいればと思っています。生成されたDTMに傾斜やハイルシェードを適用すると、目立つタイル効果が現れ、とても見苦しいです。しかし、DSMに傾斜やハイルシェードを適用しても、そのようなタイル効果はありません。最新の画像処理では、2D Productsの下でMerge Tiles True Orthoを選択しました。True Ortho画像がマージされれば、DTMのタイル効果が消えるかもしれないと考えたからです。しかし、それはそうならないようです。何か見落としているのでしょうか？<\/P>

最初の画像はDTMの傾斜です。2番目の画像はDSMの傾斜です。<\/P>

<\/span><\/span><\/P>

タグ付きの投稿をもっと見る

Accepted answers

All comments

AnthonyDeLuca

I am still seeking information on this issue if anyone can help me. Here is a small clip of another area in which I used twice as many photos to generate the True Ortho, DSM, and DTM. The grid effect is even worse and very visible on the architecture.

Cody Benkelman

Anthony

Sorry nobody has replied. I don't fully understand this - Is this a Drone2Map question? D2M does not provide the ability to represent DSMs/DTMs as slope. Are your screenshots generated in ArcGIS Pro or some other software? Or did you create a slope function template in Pro and import it into Drone2Map?

If you can send your original DSM, DTM, and slope version of one or both it might help - but let us know how they were created.

Cody B.

AnthonyDeLuca

Hi Cody,

This is a Drone2Map question because I used Drone2Map to create the DSMs and DTMs from drone-based photos. What I do not understand is why the DSM that Drone2Map created lacks these tile lines visible in a hillshade or slope raster, but the DTM does have these tile lines.

The screenshots are from ArcGIS Pro. In Drone2Map I simply clicked the "Open in ArcGIS Pro" button and everything like the DSM, DTM, and TrueOrtho were automatically imported into Pro.

When I get home later today, I can share screenshots of the processing options I used in Drone2Map to create the DSMs/DTMs if that helps.

AnthonyDeLuca

Hi Cody,

Here are the options I am using in Drone2Map. There are two areas I am generating DSMs/DTMs for and they are different in overall size. The larger area has almost 700 photos and the smaller area almost 400 photos. But I am using the same options for both areas to try and create as high a quality DSM, DTM, and True Photo as possible.

Cody Benkelman

hi Anthony

We've done some internal testing but can't reproduce this, and we've never seen or heard of this from other users. Have you seen this with other datasets?

Can you send us your DSM and DTM? Either that and/or send us some of your source images? I'll send you a direct message so you have my email.

If the files are too large, we could do some testing with subsets (clipped area of interest) from the DSM and DTM. If the data is proprietary, we'll keep it confidential within Esri. But if it's highly sensitive and you can't share it, we'll have to pursue other methods to find the problem.

Thanks
Cody B

PatrickOswald1

I got a similar issue with tiling, there the resulting DTM has "steps" very different elevation values between the tiles resulting in steps that make the DTM unusable. My project is a rather big one with 10000 images and 3.5cm ground resolution. though it still should work as the DSM model looks good.

The same problem happened also with another larger project i had (15000 images). What to do?

MarkBarker1

Hi @PatrickOswald1,

We are looking into this behavior to see if we can reproduce it on our end. Are you willing to share a subset of your project with us to test with?

If so, please email me directly and I can get a file share setup.
mbarker@esri.com

Thank you,
Mark

会話に参加する

サインインしたメンバーは投稿、更新のフォローなどができます。初めてですか？無料アカウントを登録してください。

クイックリンク

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.