Hub Terminator内でのストランドの接続方法

Question

こんにちは、

新しいバージョンTelco Solution 1.1をテストしていますが、Hub Terminator内でストランドレベルで2本のケーブルを接続することができません。

Hub Terminatorからドロップケーブル（1ストランド）を作成します。Hub TerminatorをクリックしてModify associationを選択すると、接続部分に何も読み込まれず、接続を作成できません。

どこが間違っているのか教えていただけますか？

私のワークフローのビデオをご覧ください。

ありがとうございます。

Vladimir

Anonymous User · Accepted Answer

Hi Vladimir,

With the non-spatial model, users will need to take additional steps to build connectivity associations between the cable connectors, equipment ports, or splices within the equipment.

In your video, as you zoom into the Access Hub, you will need to build some interconnections between the Fiber Connectors within Connector Groups and the Patch Panel ports within 24-Port Patch Panel, which channels the connectivity between Access and Drop Network. You need to continue expanding the containment tree from the attribute pane to see those connectors and ports.

In the Utility Network Ribbon, use the "Modify" tool within the Association tab, create the association between the pairs of ports with the equipment.

The key here is you will need to identify the right connectors or ports from the proper chassis and load them as an active item to start the junction-to-junction connection process. This is also a space where we are reserving for users and Esri partners to create customized productivity tools and UIs to assist with this workflow.

I have included more workflows in this storymap - https://storymaps.arcgis.com/stories/2b0da80ab0ff4f17bb2a2103a4095611

Hopefully, this is helpful.

Junjie

Anonymous User · Accepted Answer

Hi Vladimir,

You are getting a step closer to finish the connection!

The only change you have to make is the terminal direction for the connector has to be "Front", in our model, the backside of the fiber/coax/copper connector is always automatically connected to the strand. The "Front" side is for connections within the device.

Once you flip that direction to "Front", it will work.