-
異なるポリゴンの時間インピーダンス制約を満たす救急車の配置
私たちは、どこに施設を建設するかを決めようとしているのではありません。配置候補地はすでに決まっています。毎日、毎時間、需要と利用可能なリソースに基づいて、候補地のどこに救急車を待機させるかを決定します。配置計画は、優先度順に並べた待機場所のリストです。救急車が1台利用可能ならレベル1に配置します。2台ならレベル1と2に、3台ならレベル1、2、3に配置し、以下同様です。最適化の目的は平均移動時間の最小化ではありません。契約上の応答基準を満たす割合を最大化することです。サービスエリア内では、事故が発生した場所によって契約上の応答基準が異なります。需要地点は、単一の移動時間に基づいてカバーされるかどうかが決まるわけではありません。各需要地点には、そ…
-
VRPルート出力のギャップ
一連の除雪ルートを最適化しようとしているのですが、ルートが続くはずの場所にギャップができてしまいます。注文場所でのUターンは禁止していると伝えたところ、時々ギャップは解消されますが、再実行すると他の場所でギャップが発生します。プラウは除雪ルートのすべての道路区間を通らなければなりません。ブロックの周りをぐるぐる回る必要があっても問題ないとどう伝えればよいでしょうか。
-
一部の起点ではルーティングができないOD移動制限
タイトルの通り、いくつかの起点で正確なODマトリックス結果が得られず、以下を含むトラブルシューティングリソースをすべて試しました。 https://doc.esri.com/en/arcgis-pro/latest/help/analysis/networks/troubleshoot-network-analysis-problems.html 不正な制限に関するセクションを含む https://doc.esri.com/en/arcgis-pro/latest/help/analysis/networks/travel-modes-in-network-analysis-layers.html#4F4 状況: Arcgis Pro…
-
How do I fill in the blank areas where streets are far apart?
Hey Yall, Its been a while since I've used network analyst and I seem to be having a problem with the service areas leaving chunks of blank space in rural parts of town where the streets maybe a mile apart. I have adjusted what seems like everything and it doesn't seem to make any difference and I don't remember this being…
-
How can I model vehicle-specific time-dependent road restrictions in ArcGIS VRP?
I am working with ArcGIS Network Analyst Vehicle Routing Problem (VRP) and I am trying to model a real-world logistics scenario involving time-dependent road access restrictions. Scenario: * Around 100 orders distributed across the Jakarta metropolitan area (Indonesia). * Around 40 vehicles with different capacities,…
-
Combine steps involving stairs and turns
I'd like to see improved Route Solver directions for steps involving stairs and turns. Right now, directions to take stairs don't include "turn" guidance; a turn leading directly to stairs would not instruct the user about said turn. My current workaround to get a turn maneuver before the stairs is to add a small "path"…
-
How to Generate ETA calculations With ArcGIS Network Analyst
Hello Everyone, I need your support to understand how ETA can be calculated with ArcGIS Network Analyst, and Another questions, is on how you can use ArcGIS Network analyst in real time transportation with closest routing to destination.
-
Route Solver directions: stairs and turns
I noticed that steps in my pedestrian Route network analysis layer that require turning then navigating stairs only mention the stairs and not the turn. See example in my image below. After the selected step Turn right, the next step is to take the stairs, however first the user needs to turn left (at the red star…
-
"Enter building" direction text
What field mappings can be used, if any, to generate a direction step instructing users to enter a building? With my current network settings, route directions do not indicate when a user enters a building. Is this feature available with the correct field mappings? I was thinking about using Administrative Area to generate…
-
Route Solver - Add Locations - Convert Model Builder to Python script
Greetings: I have created a manual process of creating a route within a File Geodatabase with the Add Locations and Solve geoprocessing tool, also building it into a model within ModelBuilder. However, the goal is to export the model to a stand-alone Python script to incorporate into an already established batch file. The…
-
Closest Facility Routes interactive
We were using the Closest Facility solver to solve the route and able to return turn-by-turn directions JSON response from it. How can we integrate these direction results with a drag-and-drop route option? The Directions component provides this functionality out of the box, but since we cannot execute a separate request…
-
Census roads to build network dataset
I am trying to create a network dataset for 2010, using US Census Road shapefiles, in order to run the OD Cost Matrix. I've followed the steps to create a feature dataset in the geodatabase and create and build a network dataset. With Census road data, I did not receive any additional connectivity or attribute information,…
-
Service Area Solve with Python
Hello, I have a Pro project that uses Network Analyst to show 5-mile driving distances from the district's fire stations. I am using lines instead of polygons for the service area and I have several different service areas saved depending on which station I'm looking at. The fire station locations never change, but the…
-
Updating a network analyst service
I have Layers within a Enterprise Geodatabas I build the network and then publish it as part of a service. The edges in the network dataset need to be updated regularly. How can I update the edges in an automated workflow, but ensure that if the network build fails, it reverts back to the previous (working) network? Also,…
-
Shapes.txt file in Public Transit Model
Is a shapes.txt file entry required for a line to work with service area or OD matrix tools in a Public Transit Network created from a GTFS feed? I was under the impression this was optional but have had difficulties getting a line for a future scenario, which I manually entered into the feed stops, stop_times, and trips…
-
Extract data from ArcGIS Network Analyst
Hello! I want to be able to get the ArcGIS Network Analyst road network data in a graph format where edges are road segments, nodes are junctions. Attributes like turn signals, one-way or two-way road, speed limit, etc. I want to fetch this using Python in ArcGIS Pro, so I can feed it forward to my functions in a graph…
-
Custom transportation network
Hello, is it possible to publish a custom transportation network as an ArcGIS Online service? Thank you very much
-
What is best projection for network analysis
I can use some advice. I work for a school district, where I must calculate the walking distance of a school using Network Analysis by creating a service area using distance as a cost. But I am always try to make the most accurate findings. Before, I used either UTM NAD 83 12N or the WGS 84 Web Mercator. But I discovered…
-
Recover Network Dataset from Mobile Map Package
Recently we had a hard drive crash and lost a custom network dataset. We previously published an MMPK to our portal to use the network dataset in Navigator. We found a workflow to access the ND by downloading the MMPK, changing the file extension to .ZIP, and extracting the zipped folder. Within a sub folder "commondata"…
-
Network Dataset / Display Filters
Hi, In a web map, I'd like to be able to limit the features that are displayed, but for a network dataset. Specifically, the functionality I'm looking for is "display filters" (https://pro.arcgis.com/en/pro-app/latest/help/mapping/layer-properties/display-filters.htm) but for network datasets. I'm trying to do exactly…
-
ArcGIS Pro / Live Traffic / Forward Proxy Data Update Issues
Hi, Environment: * Windows 10 Enterprise LTSC, ArcGIS Pro 3.6 * Network Dataset configured with Live Traffic from TomTom * Internet connectivity via forward proxy Summary: The live traffic data update functionality in a network dataset in ArcGIS Pro and Enterprise does not appear to use the forward proxy configured in…
-
Snow Plow Routing Network with Multiple Lanes
Hello, I work for a small local municipality and we would like to be able to map out the quickest routes for our snow plow contractors to take that covers all of our streets. We have classes for sections of streets that we prioritize over others, as ranked below. * Slick Routes - Street segments such as intersections,…
-
Clear existing stops and route in ArcGIS Pro
It has been a while since I have looked at Network Analyst / Network Dataset as the last time was in ArcMap. I have a Network Dataset configured and have done some test routing. Is there a way in the ribbon to batch clear existing stops/routes or is it a process of deleting features via the editing tools like you would for…
-
Create Travel Time Cost Surface and/or Travel Time Raster Using the ArcGIS Routing Service as Input Data
I work in an organization which implements programs which impact public health at the state level. We have recently been working on analyses assessing the accessibility of services for state residents, especially in rural areas. We have been operationalizing accessibility using isochrones created using the Esri Routing…
-
Modeling Fire Apparatus Exemptions in Network Analyst for Closest Facility
Hi everyone, I'm working on configuring our ArcGIS Network Analyst model to support Closest Facility analysis for our 911 dispatch system, which is driven by CAD/AVL data. I've run into a consistent issue: sometimes the closest recommended unit is actually not the fastest unit because the routing model doesn't accurately…