nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Erreur dans le reconditionnement DEM dans Arc hydro 10

Anonymous User

<\/HEAD>Utilisateur original : souris_boo<\/SPAN>

Bonjour !<\/SPAN>
Je viens d'installer Arc Hydro pour ArcGis 10 et je reçois cette erreur lors du traitement du reconditionnement DEM<\/SPAN>

"Erreur HRESULT E_FAIL a été renvoyée suite à un appel à un composant COM"<\/SPAN>

Aidez-moi s'il vous plaît<\/SPAN>

Natalie<\/SPAN><\/BODY><\/HTML>

Trouver plus de publications taguées avec

Arc Hydro

Accepted answers

Anonymous User

Original User: souris_boo

Hi

I contacted support Arc hydro and my problem was that I did not have the OBJECTID field in my feature class.
I added it and now everything works fine. They will correct the problem.

Natalie

All comments

MarkBoucher

I downloaded your data. I projected the streams layer to the same coordinate system a you dem and changed the project on the data frame to that same projection. I ran the dem reconditioning using the dem and the reprojected streams dataset and it ran without error.

Mark

BritneyVazquez

Yup, that fixed it! Thank you!

MarkBoucher

Your raster's coordinate system is:

USA_Contiguous_Albers_Equal_Area_Conic_USGS_version, WKID: 102039 Authority: ESRI

Your polyline layer coordinate system is:

GCS_North_American_1983, WKID: 4269 Authority: EPSG

Your first step is to choose the coordinate system for your project and reproject the data to the same coordinate system.

Mark

BritneyVazquez

I am similarly having issues with the DEM reconditioning tool. I have tried all of the suggested solutions, including those found in the Arc Hydro Problem Solvers thread. Any help on this issue would be greatly appreciated!

Data.zip

FranklinEbner

I was getting this error message "Error HRESULT E_FAIL has been returned from a call to a COM component" and finally exported my data into a gdb feature class from a shapefile. Now it works, thank you to this thread!

Anonymous User

Original User: synaps

Yes, I use 10.1 SP1 and this error appears when I use the new Beta version.
I posted here due to the fact my previous messages describing some errors that I got are still in this topic.

V_StuartFoote

Dmitrii,

Are you by chance on ArcGIS Desktop 10.0? The ArcHydro Beta (build 10.1.0.52) is for ArcGIS for Desktop 10.1

You'd need an ArcHydro for 10.0 (last build was 2.1.0.116) if you are on Desktop 10.0

Stuart

Anonymous User

Original User: synaps

I un- and re-installed Arc Hydro Tools and tried to run it again. When trying to "Set Target Locations", which seems simple enough, I get a "tool not valid" error. None of the tools function, various errors are returned from all of them.

I`ve just installed BETA 10.1 http://blogs.esri.com/esri/arcgis/2012/11/26/are-you-using-arc-hydro-tools-for-10-1-beta/ and my comp freezes and returns me with the message "tool not valid" for all of them.

Anonymous User

Original User: mattnash

I un- and re-installed Arc Hydro Tools and tried to run it again. When trying to "Set Target Locations", which seems simple enough, I get a "tool not valid" error. None of the tools function, various errors are returned from all of them. I'm not delivering as promised, and I'm losing my cred, man.

MattNash

Hi, has anybody made any progress on these errors? I get the " HRESULT E_FAIL " and "error 010024: Error during conversion" and am completely unable to use ArcHydro since installing the most current version after getting upgraded to ArcGiS 10.1. I'm experienced with the toolset and have followed all advice given here for setting up. Any advice would be most appreciated.

Anonymous User

Original User: synaps

Everything done right, but result is the same!
I think I have found a clue 😉
See the first attachment and the folder where ArcGIS takes an ObjectID field. Why so? My hydroconfig .gdb and temp folder were in the

\ dirrectory

1.jpg

2.jpg

MarkBoucher

Dmitrii,

I just started a new mxd, added the NHDFlowline layer, added elev_cm, saved as SM.mxd (a simple file name), in G:\fldctl\PROGRAMS\ArcHydro\DataForArcHydro20Tutorial\SanMarcos (a long directory name, but with no spaces). Then I ran the DEM Reconditioning and it ran fine. This is with the elev_cm which is an "unsigned integer" grid which I thought might be a problem, but obviously isn't.

My sense is that your problem is not the data. Check your directory path and make sure it has no spaces. Start from a clean mxd so the target locations are set properly. Keep it simple and see if it runs.

FYI - my target locations are (look under ApUtilities\Set Target Locations\HydroConfig):[INDENT]Raster Data: G:\fldctl\PROGRAMS\ArcHydro\DataForArcHydro20Tutorial\SanMarcos\
Vector Data: G:\fldctl\PROGRAMS\ArcHydro\DataForArcHydro20Tutorial\SanMarcos\sm.gdb (sm.gdb here has the same name as the name of as my sm.mxd)[/INDENT]

I've attached a zip of the Toolbox with the Model in it. The bulk of the Model can be found in the Arc Hydro Toolbox.tbx under Terrain Preprocessing Workflows/Basic Dendritic Terrain Processing. I've added the DEM Reconditioning and Fill Sinks tools by dragging and dropping that command from the Arc Hydro Toolbox.tbx\Terrain Preprocessing tools and then editing the input "ovals" to reference the correct DEM and stream data.

I suggest you put the unzipped Toolbox.tbx file in the same directory as your mxd. Via the catalogue in ArcMap open the toolbox and then edit the Model. Make sure the input ovals reference your data, save the model and then run it while in "edit". You can copy and paste the runtime messages to a text/word file if you need to keep them for study. I just did this for a final check and it work fine.

Let us know how it goes.

Toolbox.zip

Anonymous User

Original User: synaps

Mark, thank you very much for your time and investigation into the problem. I did everything!
Could you please attach this model for ModelBuilder, so I can see an error result by myself?
Now I have some new error in execution the Polyline To Raster tool (I think DEM Reconditioning process is using this tool): "Error HRESULT E_FAIL has been returned from a call to a COM component". I should understand what is the problem to give all my insights.

MarkBoucher

Dmitrii,

I downloaded the tutorial data from the link you provided and started an mxd. I set up a model in Model Builder. I find the runtime messages from Model Builder are a little more informative. I saw a message about the elev DEM being integer. So, I used the raster calculator function Float() function to make a floating point DEM. I tried again and found my target locations were off (I hadn't started by closing ArcMap and starting from scratch). I also saved the mxd with a shorter name, made sure the processing extent was the same as my new DEM. I started up the model again and it ran fine all the way through AdjointCatchment (see image).

So, I think the tutorial stream data is good and it comes with the correct field name (OBJECTID). I think your error might be that DEM is integer and needs to be converted to floating point. After getting the Model to run with a floating point DEM, I ran it again with the integer DEM and it didn't get past the DEM Reconditioning. I changed to the floating point DEM and it ran fine.

So use the raster calculator float() function to create a floating point DEM. Then check the processing extent and the target locations to make sure they are correct. The best thing to do is to start with a fresh mxd with a simple name and save it after adding the DEM and stream layer.

Hope this helps.

[ATTACH=CONFIG]19026[/ATTACH]

Arc Hydro Tutorial.jpg

Anonymous User

Original User: MBoucher21

Thanks Christine!

D_D_

DEMRecond.jpg

Anonymous User

Original User: cdarti

You should see a more explicit error message in the geoprocessing result window.
If you are not using shapefiles, the error is likely that your input stream feature class has the OID field instead of the OBJECTID field.
During our upgrade of the code to take advantage of the geoprocessing conversion tool in DEM Reconditioning, we have hardcoded the field OBJECTID by mistake (instead of letting the system figuring it out -- OID, OBJECTID, etc.). So the tool fails when OBJECTID is not found in the input stream feature class. The workaround is to add the OBJECTID field to your input stream feature class.

We are in the middle of major changes and will post the fix with the latest updates.

Christine Dartiguenave
Esri Water Resources Team
Arc Hydro Release Manager

MarkBoucher

how we can invite them to this thread?

I sent a msg to an ESRI Senior Member asking them if they could direct an ESRI person to this link. Let's see what happens.

Anonymous User

Original User: synaps

chukitskoye, nope... nothing new to inform.
MBoucher21, how we can invite them to this thread?

MarkBoucher

Sound's like its time for ESRI to speak to this error.

Anonymous User

Original User: chukitskoye

Oh dear. I'm going to have add my woes to the list of those plagued by "Error during conversion" while trying to recondition a DEM in ArcHydro. synaps, have you found anything new to report?

I'm running the latest version of ArcHydro on ArcGIS 10.1, at ArcInfo level (afaik it's ArcInfo--I'm using the "Desktop Advanced Student Edition," as I am a student). I am running Windows 7 Professional SP1 64-bit.

I've followed all of the steps outlined in the Geoprocessing Tutorial pdf (on the FTP site), and listed in other posts. I'm putting my rasters and vectors in their proper places. My river is in a feature class inside a feature dataset in a .gdb; folder names and indeed the whole path has no spaces, etc...whole new projects; clearing my temp folder every time I try to run the tool; saving my mxd; and, as mentioned, all the steps listed in the error-solving post on this forum.

Still, this error pops up each time, much like synaps' original error:

Making sharp constant grid ..
ERROR 010024: Error during conversion.
Failed to execute (DEMReconditioning).
Failed at Wed Oct 31 22:25:09 2012 (Elapsed Time: 3.00 seconds)

Every time at the "making sharp constant grid" step, the tool fails. Argh! I've tried using a .tif and a regular GRID as the raw DEM input, but no dice either way. Does the bit depth/pixel type matter? What else can I try to do?

All insight is appreciated. Thank you!

D_D_

It`s a .tif from the Tutorial Data for ArcHydro 2.0 (ftp://RiverHydraulics@ftp.esri.com/ArcHydro/Data/Tutorial/2.0/) and it`s a step of Arc Hydro Tools 2.0 - Tutorial.pdf (ftp://RiverHydraulics@ftp.esri.com/ArcHydro/Doc/ArcHydro2_0/). In this tutorial the data is in the AIG format, but it doesn`t matter in my case. If it seems not to work with the tutorial data I definitely wouldn`t expect this program to work with the real data...
Spatial Analyst works perfectly!

Anonymous User

Original User: MBoucher21

I see you are using a tif. I've never started with a tif, so I don't know if using a tif works with the Arc Hydro tools. Converting the tif to an official raster may solve the problem. However, I converted my raster to a tif and the tif worked with DEM Reconditioning. I'm no expert on raster/tif issues with Spatial Analyst, but maybe the error lies in that.

D_D_

After I updated Arcgis Desktop 10.1 to SP1 I get new type of error in DEM reconditioning Tool:

Messages
Executing: DEMReconditioning elev_cm.tif NHDFlowline 5 10 1000 C:\Users\<msg>0;Start Time: Wed Oct 31 17:45:10 2012
ERROR 000816: The tool is not valid.
Failed to execute (DEMReconditioning).
Failed at Wed Oct 31 17:45:10 2012 (Elapsed Time: 0,00 seconds)
Failed at Wed Oct 31 17:45:10 2012 (Elapsed Time: 0,00 seconds)

000816 : The tool is not valid

Anonymous User

Original User: Yury_Korobochkin

Hi!
I have just installed ArcGis 10.1
and installed Arc Hydro for ArcGis 10.1
Every time I try to run DEM Manipulation || DEM Reconditioning I get " ERROR 010024 :error during conversion".
In spite of everything was done in accordance with Tutorials, I get this error message.
Maybe anybody could help me...
I would be very greatful.

Yury

D_D_

so, I watched ArcCatalog results and it is 2 types of errors based on the input data that I used:
1) When I put river.shp from the .gdb it gives me this error:

Messages
Executing: DEMReconditioning "C:\Users\<msg>0;Start Time: Wed Oct 24 12:39:00 2012
Making buffer constant grid ..
Making smooth constant grid ..
Making sharp constant grid ..
ERROR 010024: Error during conversion.
Failed to execute (DEMReconditioning).
Failed at Wed Oct 24 12:39:01 2012 (Elapsed Time: 1,00 seconds)
Failed at Wed Oct 24 12:39:01 2012 (Elapsed Time: 1,00 seconds)

2) When I put river.shp from the folder I get this:

Executing: DEMReconditioning "C:\Users\<msg>0;Start Time: Wed Oct 24 14:36:19 2012
<msg>2;Failed to execute (DEMReconditioning).
Failed at Wed Oct 24 14:36:19 2012 (Elapsed Time: 0,00 seconds)
Failed to execute (DEMReconditioning).
Failed at Wed Oct 24 14:36:19 2012 (Elapsed Time: 0,00 seconds)

Наve been trying different output locations and file extensions, but it doen`t help.
win7 x64

Anonymous User

Original User: MBoucher21

MBoucher21, I have the same error that kimcarlson posted... What might be the case? Using just tutorial data for ArcHydro 2.
ArcGIS 10.1, latest ArcHydro for 10.1 from the ftp

I'm not sure what is going wrong with kimcarlson's project. I searched the error kimcarlson posted and found this in Desktop Help:
http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#//00vq00000002010024.htm

The DEMs I use are floating point and I've move the polyline layer I used for agreestream for burning the streams into a geodatabase. I don't get this error.

D_D_

MBoucher21, I have the same error that kimcarlson posted... What might be the case? Using just tutorial data for ArcHydro 2.
ArcGIS 10.1, latest ArcHydro for 10.1 from the ftp

Anonymous User

Original User: souris_boo

It is imperative that the data is in a geodatabase

the feature class was a river shapefile.

not more complicated than that

Natalie

MarkBoucher

I did not have the OBJECTID field in my feature class.

Interesting. Which feature class was missing the OBJECTID? Agreestream?

Anonymous User

Original User: souris_boo

Bien sure.....and how am I doing?

Thanks.

Rejoindre la conversation

Les membres connectés peuvent publier, suivre les mises à jour, et plus encore. Nouveau ici ? Inscrivez-vous gratuitement.

Liens rapides

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.