nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

SharePoint 2010, Windows Server 2008\/R2 ne peut pas ajouter les deux web parts

ToddCrenshaw

<\/HEAD>J'exécute Windows Server 2008\/R2 avec SharePoint 2010 Enterprise. J'ai installé le ArcGIS Geolist Web Part et le ArcGIS Map Web Part sur le portail principal. En allant sur un site et en sélectionnant modifier la page, je vois les liens "Ajouter un Web Part" dans les zones de la page. Je clique sur le lien et en sélectionnant l'un ou l'autre des web parts ArcGIS, il est placé dans la page. Après cela, les contrôles d'édition de la page deviennent inactifs (grisés). Le bouton Modifier perd complètement son icône. Cliquer sur "Ajouter un Web Part" dans n'importe quelle zone ne produit absolument aucun effet. Après avoir ajouté le premier web part, en bas à gauche d'IE, j'obtiens un avertissement "Terminé, mais avec des erreurs sur la page." Je vais simplement sur la flèche déroulante du web part ArcGIS et sélectionne Supprimer. Une fois le web part supprimé, les contrôles d'édition des pages dans le ruban redeviennent actifs. Je peux ajouter d'autres web parts, autant que je veux sans aucun problème. Cela ne se produit que lorsque j'ajoute l'un ou l'autre des web parts ArcGIS. Toute aide pour résoudre ce problème serait appréciée.<\/SPAN><\/BODY><\/HTML>

Trouver plus de publications taguées avec

Accepted answers

All comments

João_PauloMenezes

Rich, you are correct. I retracted the solution and removed all related lists and then reinstalled and now it's working fine.

Thanks!

RichZwaap

João - you should not be seeing that issue with 2.0. You need to uninstall version 1.x and remove the 1.x configuration lists (you can find a list of the 1.x configuration lists here). Note that your 1.x web parts will no longer work - you will need to create new Map Web Parts for version 2.0. Also, at version 2.0, there is no longer a Geolist Web Part; the attribute table functionality has been embedded within the Map Web Part.

Hope this helps.

João_PauloMenezes

I had the same "Expected '('" problem with version 1. I was waiting for version 2 to be released, hoping that it would solve the problem.

I have now just upgraded the ArcGIS Mapping for SharePoint version to 2.0 and I still get the same Javascript error. Can someone else confirm this?

RichZwaap

Version 2.0 of ArcGIS Mapping for SharePoint has been released. 2.0 is built specifically for SharePoint 2010 and includes many new features and enhancements. If you are using SharePoint 2010, please uninstall version 1.1.1 and go get version 2.0 from the Resource Center - http://help.arcgis.com/en/webapps/sharepoint.

MarkWiggins

Did you add them to a web part page or a wiki page?

Anonymous User

Thanks Rex for the update about what's coming down the road in SharePoint mapping. For those running into problems in v1.1.1 ArcGIS Mapping for SharePoint (in SharePoint 2010), I set up a Window's Server 2008 R2 Machine and here is my experience. I did see a JavaScript error on the page, but I did not experience any functionality issues when saving the mapping web part.

-My Profile link and username in the upper right corner remained on the page

-For those who have hit this problem I recommend start troubleshooting your installation. Keep in mind the Setup / Install does not involve the SPConfigUtility.exe file. Rather it involves only the Stsadm command-line tool and some activation steps which are all outlined in the PDF that ships with the 1.1.1 bundle

-Lastly in SharePoint 2010, make sure the Page Tab is active when editing the page at large. Should you want to edit the Map Web Part make sure you hover over the upper right corner of the map section (around the clean blue line) which will bring up your editing options. Notice when you hover away the editing options are hidden so the map is not obstructed.

Note: Jeff since I know your now using the new ArcGIS SharePoint 2.0 Beta I will reach out to you via phone to check on things. Hope you are enjoying it, kudos to the Dev Team.

Regards,

Doug Carroll, ESRI Support Services SDK Team
http://support.esri.com/

RexHansenAFO

Unfortunately we've been unable to reproduce the problems mentioned in this forum thread regarding the ArcGIS SharePoint 1.1.1 product on SharePoint 2010. On that note, ESRI will release version 2.0 of the ArcGIS SharePoint product for SharePoint 2010 in late September. All active development for the SharePoint 2010 platform is going into the 2.0 product. We do have a limited beta program for ArcGIS SharePoint 2.0. Let me know if you would like to participate.

Thanks
-Rex Hansen
Esri | Product Lead, ArcGIS SharePoint
rhansen@esri.com

JeffPope

Anyone have a resolution to this yet? Hate that I have these killer ESRI sharepoint modules activated and can't use any of them. Please advise. Thanks

Jeff

JeffPope

Another anomaly just found. On any SharePoint 2010 site where I have the map web part, not only do I get the Java error as described above, but the My Site and My Profile link from my username in the upper right corner are no longer there. As soon as I remove the ESRI web part, these 2 options come back. There must be a code fix for this. Please advise.

Jeff

JeffPope

I thought that this issue sounded a bit familiar. It is a JavaScript issue within the SharePoint page.
What browser and version are you running?

Same result with IE 8 or Firefox 3.6.3

Webpage error details

User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)
Timestamp: Wed, 11 Aug 2010 19:11:39 UTC

Message: Expected '('
Line: 1050
Char: 40
Code: 0
URI: http://xyz.xyz/SitePages/Home.aspx

BobHazelton

I thought that this issue sounded a bit familiar. It is a JavaScript issue within the SharePoint page.
What browser and version are you running?

JeffPope

I have the exact same problem. I'm on server standard 2008, SQL server 2008 and sharepoint 2010 enterprise. I get the little 'yield' sign saying there is an error. Says I have an unexpected ')'. As soon as I remove the ESRI web parts the error disappears. Behaves exactly as described above. The edit page feature no longer works. Please advise.

MichaelOlkin

I'm encountering this same issue & I'll definitely be interested in working through to a solution.

BobHazelton

I'm sorry, but I haven't been able to reproduce this situation.
If you are still experiencing problems please open a Tech Support call at http://support.esri.com/.

Thanks,

Bob Hazelton
Esri | Product Manager

Phone: 909-793-2853 ext. 1-3954

Rejoindre la conversation

Les membres connectés peuvent publier, suivre les mises à jour, et plus encore. Nouveau ici ? Inscrivez-vous gratuitement.

Liens rapides

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.