nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Réception de l'erreur 000210 lors de l'exécution de LAS Dataset To Raster

DavidHorrocks

<\/HEAD>

J'ai téléchargé un jeu de données LAS développé par NOAA pour une zone du Massachusetts. J'essaie de le convertir en un MNT que je peux utiliser pour créer des courbes de niveau. J'ai filtré les données pour ne montrer que les points au sol. Ensuite, lorsque j'essaie d'exécuter l'outil LAS Dataset to Raster dans ArcGIS Pro 2.3, je reçois l'erreur 000210 : Impossible de créer la sortie "filepath".<\/P>

<\/P>

J'ai consulté l'aide en ligne pour cette erreur et il semble s'agir d'un problème de verrouillage des données ou de chemin de fichier. J'ai fermé tous les autres logiciels ouverts pour m'assurer que rien d'autre ne verrouillait les données. J'ai redémarré ArcGIS Pro pour voir si cela aidait. J'ai essayé d'enregistrer dans une GDB test sur mon bureau, et le problème persiste.<\/P>

<\/P>

J'ai inclus une capture d'écran des paramètres que j'utilise pour l'outil et des propriétés LAS ci-dessous. Merci de me faire savoir s'il existe une solution à ce problème.<\/P>

<\/P>

Cordialement,<\/P>

David<\/P><\/BODY><\/HTML>

Trouver plus de publications taguées avec

Analysis

Accepted answers

VinayViswambharan1

Do you have your data in GCS and specified the cellsize of 2. It’s a highly inappropriate cellsize for the data. Assuming this is the problem I’d recommend the las file be projected first (e.g., via the ExtractLAS tool – by setting the output SR in the GP environment for the tool.

All comments

DanPatterson_Retired

Did you try saving as a *.tif in a folder? seems to be an esri preferred raster format now

JayJohnsonWashoeCounty

Have you tried a shorter output file name or outputting to a tif rather than an ESRI GRID format? The input las filename is also really long - maybe try renaming it to something shorter. Some tools seem to have issues with long paths and/or long names.

DavidHorrocks

Thanks for the reply. I tried saving as a TIF to a folder and still receive the same error message.

DavidHorrocks

Thanks for the reply. I relocated all of my work to the desktop to shorten the file path, and renamed the LAS files to something shorter (~10 characters). I changed the output name and file type to test.tif. Despite all of this, I am still receiving the same error.

DanPatterson_Retired

What is the path then?

is it to a local folder?

try c:\Temp\raster.tif to rule out file and path issue for the destination file... it may be the input that is at issue, although the error suggests otherwise

DavidHorrocks

I tried saving the input LAS file to C:\Temp and renamed it as input.las, and I chose C:\Temp\raster.tif as the output file, as you suggested. I also restarted my computer before doing this - but I am still receiving the error. I'm surprised none of this has worked.

GuenterDoerffel

Hi David,
the first thing to look at would be: Why do you want to export the raster and then make contours? Have you tried creating a MosaicDataset from your data (regardless of las files direct or LAS dataset, and then ...

Use the contour function to create raster contours
OR export contours as vectors

Just to make sure there is no general issue, I just ran the tool on a LAS Dataset with a few GIG of LAS in it .... i set the Sampling Value high, though, to be quick. The tool ran smooth. These were my settings (the exclamation makr is because I took the screenshot after the tool finished:

I did not need to set any other environments ... and for output-data naming: Specify the extension and ArcGIS will honor this, if you need more settings, check environment

Regards
Guenter

GuenterDoerffel

And: it would help, if you could take a screenshot of the properties of your LAS-Dataset and the settings you have when running the tool

DavidHorrocks

Hi Guenter,

I have included screenshots of my tool settings and my LAS dataset properties now.

Regards,

David

DavidHorrocks

Hi Guenter,

I will attempt to make a MosaicDataset and see if that helps. I have tried creating contours directly from the LAS dataset using Surface Contour, but it does not produce results I am happy with (see below screenshots of tool settings and output). I thought creating a raster first, then converting to contours may produce better results.

You will notice that my cell size was set to 2 in my tool settings. To emulate what you ran, I tried running the tool with a cell size of 100 instead, but this did not fix my issue.

Thanks,

David

VinayViswambharan1

DavidHorrocks

Hi Vinay,

Thanks for your response. I first used Extract LAS to convert the LAS file to NAD 1983 UTM and now it will convert to a raster.

David

GuenterDoerffel

Thats the advantage of a global company - one goes to sleep - another one takes over: Thanks Vinay and I am glad you solved it!

MarcoTorres1

Amazing! I had the same problem and it worked!

Can you please place an enhancement and have the error message display something more descriptive.

For example, LASD must be projected in a PCS?

-Marco

AndileMposula

The reason you get this error is because your input is a las file data type instead of las dataset. Use your las file to create las dataset and all should work.

AndileMposula

And don't forget to suffix with ".tif" when naming output.

sandipriz

Hi David,

Thanks for this post as I was having trouble converting raster from .las file.

As suggested, I tried to export the .las file with projection but it throws an error again.

Any suggestion would be helpful.

Rejoindre la conversation

Les membres connectés peuvent publier, suivre les mises à jour, et plus encore. Nouveau ici ? Inscrivez-vous gratuitement.

Liens rapides

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.