-
Comment afficher des lignes électriques en hauteur
Utiliser un MNT comme surface d’élévation : comment afficher des lignes électriques au-dessus de la surface ? La couche des lignes électriques comporte un attribut de hauteur de 20 m. Je peux extruder la ligne — avec une hauteur minimale, une hauteur maximale et une hauteur de base — mais cela affiche toujours un profil…
-
Run flood simulation in web UI via Scene Viewer / widget
I understand that ArcGIS Pro supports exporting flood simulation results as cloud raster format (multidimensional rasters), which can be displayed using a time slider on the scene viewer. However, this is not the same as viewing the water flow using a 10-60 FPS playback. It is a step-based animation that is not the same.…
-
Configurer les fenêtres contextuelles pour les couches de scène de bâtiment dans Scene Viewer
ArcGIS Scene Viewer devrait prendre en charge la configuration des fenêtres contextuelles pour les couches de scène de bâtiment. Actuellement, les fenêtres contextuelles peuvent être configurées directement dans Scene Viewer pour les couches de scène d'objets 3D, tandis que cette option n'est pas disponible pour les…
-
Prise en charge de la transparence pour les maillages intégrés
ArcGIS Scene Viewer et ArcGIS Pro devraient prendre en charge la transparence pour les maillages intégrés. Actuellement, la transparence n'est pas prise en charge pour les maillages intégrés, ce qui limite leur utilisation dans les scènes où le maillage doit être combiné avec d'autres contenus 3D. Une transparence…
-
Édition 3D avancée pour les maillages intégrés
ArcGIS Scene Viewer ou une autre application adaptée dans ArcGIS Online devrait offrir des capacités d'édition 3D plus avancées pour les maillages intégrés. Actuellement, les modifications des maillages se limitent principalement à Couper, Masquer et Remplacer des opérations basées sur des polygones. Ces options ne sont…
-
Dépendances de visibilité des couches configurables dans Scene Viewer
ArcGIS Map Viewer et Scene Viewer devraient permettre aux utilisateurs de définir des dépendances de visibilité entre des couches spécifiques. Cela permettrait de configurer des relations entre n'importe quelles couches, quel que soit leur positionnement dans la hiérarchie des couches. Par exemple, afficher la couche A…
-
Couches de groupe imbriquées et modes de visibilité dans Scene Viewer
ArcGIS Scene Viewer devrait prendre en charge les couches de groupe imbriquées, similaire à l'organisation plus flexible des couches disponible dans Map Viewer. Cela permettrait de structurer des scènes Web plus complexes en utilisant plusieurs niveaux hiérarchiques au lieu d'être limité à un seul niveau de groupe. De…
-
Publication d'une scène Web sur AGOL, la source est une classe d'entités mulipatch avec une table liée, la table liée n'est pas publiée dans le service d'entités hébergé
Bonjour, Je suis assez nouveau dans la publication de données de scène 3D, j'ai un modèle BIM d'un pont, converti en couches d'entités Muiltpatch, une table liée d'évaluation des conditions a été ajoutée à la structure des données et tout fonctionne bien dans FGB land, j'essaie maintenant de publier sur AGOL. J'ai créé une…
-
Show dynamic length label while sketching the profile line in Scene Viewer Elevation Profile
When sketching a line with the Elevation Profile tool in Scene Viewer, there is no distance feedback while drawing — the total distance is only visible on the chart after finishing. I would like a dynamic label at the cursor showing segment and total length while sketching, like the Measurement tool already has. Today,…
-
Importing XYZ map tiles to Scene Viewer
Hello, I'm currently building ExpBuilder dev edition app, which uses Scene Viewer for displaying old georeferenced maps on a globe. Main source of maps is the David Rumsey collection, which also provides IIIF manifest link. This way I can save both time and space, and instead of downloading maps, georeferencing them in Pro…
-
Labeling features in ArcScene
I used some DEMs I had to create an ArcScene 3D model of my parish. I also created contours from the DEMs and am trying to see if I could label the contours in the 3D model in ArcScene. I can see it's not straight forward using the Labeling feature as you can do in ArcGIS Pro. Can anybody point me in a direction to do this?
-
Oriented imagery error in 3D scene, but working in 2D map
I have a point oriented imagery dataset in ArcGIS Online. When I view the points in 2D, the oriented imagery viewer works perfectly. However, when adding the points into a 3D scene, the viewer gives this error message: Error occurred while loading the image. Cannot destructure property 'points' of '(intermediate value)' as…
-
Ability to adjust basemap visibility range in Scene Viewer
In map viewer, you can add multiple basemap and adjust them to appear dependent on map scale. I don't see this option available in scene viewer. Could we add this capability if it's not already? Thank you!
-
Google Photorealistic 3D Basemaps for ArcGIS Online and Trees
The Google Photorealistic 3D Basemaps are a great addition to the ArcGIS Online. I understand it is in Beta. I tried it in ArcGIS Pro and ArcGIS online has a similar negative outcome when adding vector lines as shown here. Attached are screenshots showing the vector line bouncing up and down with the trees with On the…
-
Re: Google Photorealistic 3D Basemaps for ArcGIS Online Personal Use Subscriptions?
Hi SoraKupiter , On the following page :https://www.esri.com/arcgis-blog/products/arcgis-online/3d-gis/experience-the-google-photorealistic-3d-basemap-in-arcgis-online it is stated that: sessions are not provided to students, Esri Nonprofits, or Esri Business Partner organizations. There will be options to buy…
-
Labelling in WebScene not available
Does anyone know the rules as to when the labelling option appears for a hosted feature service in ArcGIS OnLine? I have two feature services as line geometry, almost exactly the same except for some attributes and one allows me to switch on labels in the WebScene and the other has no labelling options at all. Both…
-
Reference Registered 3D Object. How to re-cache?
I created a 3D object scene layer. * Imported it into an Enterprise Geodatabase (SQL Server) * Shared it to ArcGIS Enterprise using Reference Registered Data option. Everything seems to be working ok. I can update the data in the Feature Layer, but how do I update the cache in the Scene Layer? It doesn't have the option to…
-
Scene 3D Slice tool showing height
Hello, When using the slice tool it is nice to see when certain features appear. It it possible to show at which height the horizontal/aligned slicer is based on the elevation layer/ coordinate system? This can help the user in an easy way to determine at which height assets are. It could be only one height for a…
-
Regarding Projection for Web Scene
Hello everyone, I was trying to import imagery layer to my scene but i could not do it due to different projected coordinate system: NZGD 2000 New Zealand Transverse Mercator but my base map is in web mercator. Also, I tried to add imagery layer by remobing my basemap. It didnot work. Can anyone help me to sort this out?…
-
How to add multiple elevation surfaces to Scene Viewer?
This is one of the many limitations of using Scene Viewer for subsurface geology where we often have many subsurface elevation surfaces for different formations. Since Scene Viewer essentially only allows a single Ground elevation layer, it does not allow other subsurface elevation surfaces. There are some work arounds but…
-
Scene Viewer Mesh Modifications Not Saved
Hello all, I have a simple thing. In ArcGIS Online when I: * create a new 3D scene * add a mesh (Scene Layer) * apply a custom polygonal modification to the mesh * save the scene * refresh the page * the mesh modification is no longer there, it disappears Bug? 🐞 Thank you! v.
-
Custom 3D basemap for my scenes
Hi, easy question. Is it possible to create a custom 3D basemap for my scenes in ArcGIS Online, thanks!
-
Scene Viewer cannot include features in spatial filter for a Scene Layer (it excludes them instead)
Hello, I am here to report a possible bug in ArcGIS Online Scene Viewer (as of today's version). To reproduce this bug, do the following: - Open an empty Scene Viewer - Add a Scene Layer - Click on the three dots in the list next to this layer --> Layer properties - Configure spatial filters - Select INCLUDE - Select…
-
Option for Eye-Dome Lighting in scene view online
I would like an option for Eye-Dome Lighting to improve visualization and depth perception in a point cloud. I know Modulate using intensity is an option, but that does not accomplish the same as Eye-Dome Lighting. Without Eye-Dome Lighting: With Eye-Dome Lighting:
-
Display edge dimension labels for 3D objects (buildings) in a 3D scene
Functionality to switch on and off edge dimension labels for selected 3D object models such as buildings and bridges in a 3d scene. See attached image. This will allow users to get a quick understanding of the size of a building for planning, design and regulartory purposes without needing to manually measure each edge one…
