nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

ArcScene 10.1 near non-functional with TIN (face elevation)

MikeFutrell

ArcScene: I upgraded 10 to 10.1 and now TINs are virtually non-functional when symbolizing by face elevation. TINS of even just a few faces, created in 9.x, 10, or 10.1, give that all familiar "Not Responding" for minutes then does not display correctly. Forget about turning the model. Symbolizing by wireframe, aspect, or slope seems to work ok (but elevation is 99% of use). In 10.0 even my large TINs worked fine. So now I have a lot of broken non-functional work. Even simple v10.0 SXD files won't even open!! [no other hardware/software changes were made]

Anyone else experiencing this? Do I need to roll back to 10.0?
Thank you,
Mike

Encuentra más publicaciones etiquetadas con

Accepted answers

All comments

TimBarnes

Lame!! Is there a solution to this problem yet? ArcScene crashes 100% of the time when I try to add a TIN...

as opposed to ~ %80 of the time when using ArcGlobe/ArcScene with any 'real world' data?

JeffreySwain

The fix is in for the next update 10.2 per the published bug information.

RickCarter1

I am having same problem and I am using AMD FirePro V4900 (FireGL v)

Trying to do ESRI pdf --

Introducing ArcGIS 3D Analyst: Mount St. Helens - Before and After

sthelens3d_ArcGIS.pdf

NathanHobbs

Came here looking for a fix to the same issue

Dell M6500 I7 940 Xm Quadro 3800M

Using a very simplified Tin of a 3 square mile area, tried converting Tin to Raster same issue, can not float any layer over elevation data.

Arc scene at present is unusable to me in this state. Has anyone found workarounds?

NathanHobbs

GIS-Cambria

Still having ArcScene problems with rasters and display. 2 different machines:
Dell T5500 6GB memory with NVIDIA Quadro FX4800
Driver: 9.18.13.1106
Dell M6500 8GB memory with NVIDIA Quadro FX3800M
Driver: 8.16.11.8843

Both of these machines should laugh at 3D like it's the easiest thing to handle. ArcScene....what gives? Rendering elevation DEMs should be easily handled on either of these machines, but neither are very successful...

iamidaho you aren't the only one!

DawnLasprugato1

Is there any chance I can get a patch for NIM085208 that works in 10.1? I cannot upgrade to ArcGIS 10.2 until the US Army Corps of Engineers Hydrologic Engineering Center updates their applications to be 10.2 compatible (at least the ones I use)...
That could be a year from now.
Thanks.
-Dawn Lasprugato

GIS-Cambria

Still having ArcScene problems with rasters and display. 2 different machines:
Dell T5500 6GB memory with NVIDIA Quadro FX4800
Driver: 9.18.13.1106
Dell M6500 8GB memory with NVIDIA Quadro FX3800M
Driver: 8.16.11.8843

Both of these machines should laugh at 3D like it's the easiest thing to handle. ArcScene....what gives? Rendering elevation DEMs should be easily handled on either of these machines, but neither are very successful...

iamidaho you aren't the only one!

UPDATE: It seems that most of my frustration is coming from pulling a DEM out of SDE (SQL Server). If I run ArcScene using a file geodatabase with DEMs in it ArcScene is responding well....at least for a pilot area. Will update again when trying full county area (700 sq mi).

georgerosenbaum

ArcScene crashes for me when I try to load a TIN - where's the fix?

JonZambrano

Is there a fix other than upgrading to 10.2?! For such advanced and expensive software, I truly expected 10.1 to be an improvement from 10.0, however there are more bugs and crashes that I had with 9.3 or 10.0. Will ESRI continue ignoring the issues with ArcScene10.1 or will there ever be a fix? These issues are costing me $Hundreds$ everyday!

ClaytonCrawford

Our records indicate this was fixed in 10.1.2 SP2

WilliamWhite

Our records indicate this was fixed in 10.1.2 SP2

I am having this same issue. I downloaded the 10.1 software in January (student license). I'm guessing I need to download the 10.1.2 SP2 for this to work? Where/how do I access this? Thanks!

ChristophTraun

Two of our students are considering to upgrade to 10.2 because of this issue, since TIN Rendering in ArcScene 10.1 does not work with their ATI graphics cards (ATI Mobility 3650 HD (256MB)). Can anyone verify if this issue is really solved in 10.2 ?

Kind regards,
Christoph

als21

We need to stay on 10.1 sp1 - what was the final solution?

Únete a la Conversación

Los miembros registrados pueden publicar, seguir actualizaciones y más. ¿Nuevo aquí? Regístrate gratis.

Enlaces Rápidos

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.