nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Delimitación de puentes y alcantarillas Cuencas hidrográficas (problemas avanzados)

FernandoVasconcellos

<\/HEAD>¡Hola a todos!<\/SPAN>

Después de un largo camino, obtuve las líneas de drenaje sintéticas de mi área de estudio, bastante bien definidas. Las crucé con una capa de carreteras y encontré alrededor de 3,000 puntos de drenaje definidos consistentemente. También tengo las cuencas y la cuenca adyacente bien definidas en las uniones de las líneas de drenaje. Pero necesito delimitar las cuencas para cada alcantarilla o puente. Cuando intento usar "Delineate from multiple I and O" ArcMap simplemente deja de responder. Creo que la función "Batch watershed delineation" sería mejor para mi propósito, pero no encuentro una manera de generar automáticamente los 3,000 puntos batch que tengo (en realidad estoy trabajando en una máscara pequeña, con 150 puntos piloto). Incluso cuando uso la herramienta/botón "Batch point generation" para definir manualmente solo 1 de los 150 puntos que tengo, el campo "batchdone" obtiene un "-1", lo que significa que la delimitación ha fallado (sin explicación del por qué ni ninguna pista en ArcHydro para ayudar a resolver el problema). ¿ALGUIEN SABE CÓMO DELIMITAR LAS CUENCAS PARA PUNTOS PREDETERMINADOS (MILES DE ELLOS)? ¡Agradecería cualquier ayuda!!!<\/SPAN><\/BODY><\/HTML>

Encuentra más publicaciones etiquetadas con

Water Resources

Accepted answers

MarkBoucher

As for the batch point delineation not working... I've had problems with it too.

For a project I did in 9.3, I had several dozen points and found I had to run the delineations in a certain order for each watershed. There was no common pattern for making them work. I would run them and those that returned a -1 Batch done I'd manually calculate back to 0 and try again. For my project I finally found a pattern and created a new field and input a number representing the order. When I had to re-delineate, I'd do it in "phases" following the order in that field. I believe it only delineated those batch points that were selected. Doing thousands could be a challenge.

All comments

MarkBoucher

but I can't find a way to automatically generate the 3,000 batch points I have

I often used the tools in HEC-GeoHMS (http://www.hec.usace.army.mil/software/hec-geohms/download.html). There is one under "Basin Processing" named "Import Batch Points" that might bring them all in for you. I've used GeoHMS tools in the same "session" as ArcHydro without having to create a GeoHMS project. Those tools have come in handy many times.

MarkBoucher

FernandoVasconcellos

Thank you very much, Mark! You gave me "more fuel" to keep moving ahead from the point i've been stuck for weeks! Good to know you had same difficulties with the batch delineation, so I don't credit my difficulties to my lack of experience. I'm trying to build an interesting model using the ArcGIS in a postdoctoral project, but I'm new to GIS and wouldn't have arrived where I am without the help of experienced users like you. I also have to say that the limitations of the tools (ArcMap and ArcHydro) and the "unhelpful help files" of both are very frustrating. I really thought the state of the art was more advanced. Anyway, I will start getting familiar this GeoHMS you mentioned and then try the path you suggested. I really appreciate your help!

MarkBoucher

You're welcome.

Another tip is that once you create one Batch Point and the Batch Point layer is created, you can copy and paste other points to that layer and then just fill in the fields using the Field Calculator. There is nothing "special" about creating them using the Batch Point Generation Tool other than creating the initial layer. Another pointer is that once the layer is created, you may want to copy it to another layer. One thing I do with things start going south is I simply delete geodatabase and start over, keeping the rawdem, agreestream, innerwalls, and outerwalls layers. These four layers are the basis for the hydrologically correct DEM (fil). If you have them, and you keep the options simple, you will always get the same result when you get to the fil step. Since the Batch Point layer is in the geodatabase, its nice to create a backup so you don't have to recreate it if you decide to start over. I keep the four key layers outside of the geodatabase and raster folders.

Also, I've posted a collection of ArcHydro tips here: http://forums.arcgis.com/threads/48100-ArcHydro-Problem-Solvers. I'm not the expert. I've just hit my head against the wall a few times and decided to memorialize some lessons learned (partially so I wouldn't forget them!)

Únete a la Conversación

Los miembros registrados pueden publicar, seguir actualizaciones y más. ¿Nuevo aquí? Regístrate gratis.

Enlaces Rápidos

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.