Creación de Ortomosaicos Verdaderos

İlaydaUzel

 <\/SPAN><\/P>Drone2Map, <\/SPAN><\/P> <\/SPAN>¿Podemos ajustar manualmente la resolución al crear ORTOMOSAICOS VERDADEROS a partir de imágenes de alta resolución obtenidas a bajas altitudes? <\/P>         <\/SPAN>La calibración de nuestra cámara no es posible; ¿cómo identifica su aplicación la cámara? <\/P>         <\/SPAN>Notamos distorsiones, especialmente en los puntos de las esquinas, al crear ortofotos. ¿Existe una opción para intervención manual para resolver este problema? <\/P>         <\/SPAN>Estamos combinando ortomosaicos RGB y térmicos de diferentes cámaras en una aplicación GIS, pero no parecen alinearse. ¿Hay alguna forma de resolver esto en su aplicación? Usamos referenciación geográfica en el software Quantum GIS. ¿Es posible la referenciación geográfica en su aplicación? <\/P>         <\/SPAN>¿Su programa produce una matriz de proyección que convierte coordenadas del mundo 3D en coordenadas de píxeles 2D (esto es lo más importante para nosotros)? Si no, ¿cómo podemos obtener los parámetros intrínsecos y extrínsecos? Los parámetros de rotación interior y exterior proporcionados por su software no nos permiten ejecutar correctamente la matriz de proyección. ¿Qué tipo de modelo de cámara usa cuando realiza la transformación de coordenadas del mundo a la imagen? <\/P>

MarkBarker1

Hi @İlaydaUzel ,

For your first question on adjusting the resolution, I am assuming you are talking about adjusting the output product resolution. If so, that is a setting under the processing options. (Home tab> Options> General> Project Resolution. You can manually define a pixel size to make the output products lower resolution.

The camera model is identified through the image exif. Drone2Map will automatically detect the camera model based off the specific necessary metadata fields. If they are not present, then you should get a warning when you try to process the imagery that no camera model is present. If you are able to get to the point of processing the imagery then something must be getting populated in the Edit Camera pane (Flight Data tab> Edit Camera button). If the necessary camera metadata fields are not populating then you can try to manually define the camera model information, assuming you know what the values should be. See this blog for more info: target=_blankhttps://www.esri.com/arcgis-blog/products/drone2map/imagery/using-a-custom-camera-model-in-drone2map/

I take it you are talking about distortions in the output true orthos edges? If so, then you could try to increase the Matching Neighborhood for images to see if Drone2Map will detect more tie points between neighboring images during the adjustment. (Home tab> Options> Adjust Images> Matching Neighborhood) Otherwise, if you are not able to get a better reconstruction on the edges and they still appear distorted you could clip those areas out: https://doc.arcgis.com/en/drone2map/latest/help/clip-area.htm Feel free to share the processing report for the project in your reply.

No, Drone2Map does not have georeferencing tools. Those tools are available in ArcGIS Pro and we allow you to quickly create an ArcGIS Pro project with the Open in ArcGIS Pro button on the Home tab.

Not sure if I fully understand this question, please let me know if the following explanation helps. The camera model used is whatever Drone2Map detects, or you define in the Edit Camera pane. For coordinate systems we use the same ones that are found in ArcGIS Pro, along with the same available transformations. You can install an optional ArcGIS coordinate system package that adds many more coordinate systems and transformations. These coordinate systems work for 3D or 2D datasets and you can overlay 2D layers within a 3D scene.

Regards,

Mark