Drone2Map falla durante la coincidencia de imágenes después de importar GCPs

Question

Estoy intentando procesar un conjunto de datos con la plantilla 3D usando Drone2Map. Pude procesar las imágenes sin usar GCPs. Sin embargo, después de importar un conjunto de GCPs, el proceso de Coincidencia de Imágenes falla y no se generan productos 2D ni 3D. No está claro por qué falla el proceso ya que no muestra ningún mensaje de error. <\/P> Probé en diferentes computadoras pero no tuve éxito. <\/P> Sistema operativo: Windows 10<\/P> Versión de Drone2Map: 2023.1.1<\/P> Licencia: Advanced<\/P> Dron: DJI Phantom 4 Pro<\/P> Las opciones de procesamiento están adjuntas. <\/P>

MarkBarker1 · Answer

Unfortunately, I am not able to discern much from the files you shared. The GCP values appear normal. I would need to get a look at the dataset itself to provide some more recommendations. Are you willing to share the data? If so, please email me at mbarker@esri.com and I can get a share link to you.

Regards,

Mark

CCGT_UAV · Answer

Yes, I am using a CSV file for the GCPs. I attached the CSV file and the log.

Screenshot 2023-07-07 125957.jpg

GCP.csv

MarkBarker1 · Answer

Hi @CCGT_UAV,

Thank you for reaching out. Typically if there is a failure in processing some type of warning or error message will appear in the processing log. I take it you have reviewed the processing log?

The processing options you have look pretty standard to me, the only thing that might help there is if you increase the tie point matching neighborhood. However, that really depends on your image overlap, do you have a copy of the processing report?

If you have tried different computers and are still getting the same result then it may be something with the points themselves and how they imported into Drone2Map. Assuming you are using a CSV or text file feel free to share the gcp file and I can have a look.

Regards,

Mark