nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

ArcGIS 10 Error: no editable layers

RomainHerren

Hello, I work on a lot of data that is on a server for my job. Since I switched to ArcGIS 10, I have all the time the problem as in the attached picture.
I do not work with geodatabase, but with .shp on the server. When starting an editing session, I receive always the error message "no editable layers". I looked for solutions and read a lot on forums (like this thread http://forums.arcgis.com/threads/27600-no-editable-layers-and-can-t-edit-versioned...) and the only thing that seems working is to copy everything on the C drive. But that's not a real solution...
I did not have this problem with ArcGIS 9.3, and because I work in a company, it is important for us to have our data on a server!

Does anyone have a idea? Thank you!
[ATTACH=CONFIG]12952[/ATTACH]

erreur_GIS.jpg

Find more posts tagged with

Accepted answers

RobCahalan

I know this was posted a long time ago but....If anyone has this same problem, be sure the the Data Frame your feature classes are in is Active. I just spent 30 minutes trying to resolve the problem and realized I had the wrong data frame active.

All comments

ShaningYu

I got the same problem. It was found that it was due to the crashed SDE DB. After re-building the DB and creation of the version, the problem was gone.

deleted-user-bLE_OOY6Zt-r

Closing ArcMap and restarting solved my problem on this issue. Anyone know why?

RobCahalan

I only have a little bit of server experience but are you sure they are Feature Access enabled? If not, republish with Feature Access in order to edit.

PeterJones

I have a similar problem but I am using file geodatabases. The geodb is on a local server. I've noticed it tends to happen when I have lots of layers in the map (not sure if it is the multiple projections of different files that could be causing the issue - this is the only thing I can really put it down too). My dataframe and geodb are in the same projection.

There are no permission issues (I administer this particular local drive).

The only work around I have is to close ArcMap and reopen a blank map. Then add the layer I want to add (and maybe a few references layers). I can then edit the geodatabase no worries.

I also can't copy a layer from one map to a new blank map ... I will have the same issues with no editable layers.

Anyone else have any thoughts?? Resolutions??

RhondaParrish

Thanks! This was my problem... the correct layer frame was not active! Whew! Thanks again!

joeryan

Ugh, thank you!!!! I was really starting to loose it, then I found your post. Phew!

RobCahalan

RomainHerren

Yeah, odd is the word

Thanks for your advices, I'll try and come back there to give the reason/solution. I hope!

ps: allready with SP4...

RhondaGlennon

It sounds like there could be a problem with the shapefiles themselves, but it is odd that it works in ArcGIS 9.3 but not in 10. You might try importing them into a geodatabase and see if editing is successful. Otherwise, ensure that your ArcGIS 10 is updated (service pack 4 is the current release) in case there were any software issues that have been addressed.

You should contact Esri Support or your local distributor, if outside the US, for better troubleshooting of your exact scenario and data and to enter a bug into the system, if needed.

RomainHerren

I've checked once again, I have write-access to the folder and all the individual files.

Adding the shapefiles to a blank map document doesn't change anything. As soon as I start the editing session comes the error.

If this error doesn't happen, the editing session opens but when I want to save my edits, an other error saying "empty geometry" comes...

Since this error does not occur when I work on a local drive but only on a network location, I wonder what has changed since ArcGIS 9.3.

RhondaGlennon

Well, when working with shapefiles, make sure you have write-access to the folder in which they are stored and all the individual files (such as .shp, .dbf, etc.) that make up the shapefile. The settings you mentioned for versioned and non-versioned editing do not apply to shapefiles; they are only used with ArcSDE geodatabases.

Also, try adding the shapefiles to a blank map document to see if there is something in the map that is causing this.

RomainHerren

Thanks for your answer. I have allready opened those help topics, end tried the few solutions proposed. No one works... I also tried this http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#//002700000007000000.htm without success.

I have also check with the network manager of my company, and I have no access restriction. I am the only one who works with those data, so there is no conflict.

The thing I do not understand, is that I never had this problem with ArcGIS 9.3 before. With the same data, same network, etc.
So I guess there is something with ArcGIS 10...

RhondaGlennon

If you double-click a message in that window, it will open a help topic that provides more information and a solution, when available.

Since you are working on a network location, make sure that you have write access to the directory and that no one else is using the data at the same time. Sometimes you will see the no editable layers error in conjunction with other messages that provide more detail about why you cannot edit. The message list appears to indicate (based on a translation guess) that the layers are in a basemap layer.

Join the Conversation

Signed in members can post, follow updates, and more. New here? Register a free account.

Quick Links

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.