-
ArcGIS Pro workflow for reconstructing a hypothetical MATA Transit Vision network
I am working on a GIS research project examining the MATA Transit Vision in Memphis, Tennessee. I have an existing MATA transit network with route lines and stops, and I need to reconstruct a hypothetical network based on the proposed Transit Vision route changes. I also have proposed locations for new/modified stops. *…
-
TransitNetwork for multimodal analysis?
I am trying to figure out the way to handle different travel modes and network datasets in an efficient way. I have created a transit network dataset with streets and GTFS-data. Can I use the same transit network dataset to model car driving or biking by adding travel modes that are not permitted to use the…
-
Network analyst public transit tool Prepare time lapse polygons generate polygons along LineVariantElements rather than around stops
I accidently posted in the wrong forum, I guess this is the right place. Link to my original post: Network analyst public transit tool Prepare time l... - Esri Community
-
Network Analyst Public Transit Trip Planning
In ArcGIS Pro Network Analyst, can it be used to plan public‑transit trips by route? I have a public‑school student file that I’ve geocoded, and I would like to use Network Analyst to generate the trip home for each student. I need an output file that includes the assigned routing from school to home. There is a 1.5 mile…
-
Welcome To You, To Me - and to 2026!
Happy New Year everyone! New Year, new us! Happy to be starting this new year with energy for transit in GIS. We've got soo much lined up for this team. We will be exploring new ways to get GIS energized in your agency, provide suggestions and resources for you to make that elevator (or corridor) pitch stick with your…
-
How would you automate creating routes from lists of directions on ArcGIS Pro?
We are looking to create maps from hundreds of written turn lists for transit service. The turn lists contain directions for operators to drive designated routes between locations. For example: R/8TH ST C/SOUTHRIDGE DR L/6TH AVE The geographic area would be limited to one metropolitan region. I'm not quite familiar with…
-
Limiting Walk Time when Creating Public Transit Service Area
Hi all, I am working with network analyst in ArcGIS Pro 3.2.3. creating service areas using a public transit network. I was hoping to constrain the walk time when creating service area polygons (i.e., taking transit for 30 minutes, I'd like to only walk for 8 of those minutes), and have found a) no way to do it and b)…
-
Finding Start/End Times of All Trips Utilizing GTFS
Hi All, Relatively new to utilizing GTFS. I have an exercise in mind that would output a list of all Trip patterns and their earliest start times and latest end times in a normal weekday. Based on the GTFS diagram below, does one have to connect the first/last stop of the trip (stops) to the first/last departure time…
-
GTFS to Public Transit Data model does not see/find GTFS dataset
Hi, I am working with "GTFS to Public Transit Data model" tool, and encountered a problem, when the tool cannot find the folder where I saved the GTFS dataset. In other words, I cannot select my GTFS folder in the "Input GTFS folder" part of the dialog window. If I select the acutall folder, I get a message that folder is…
-
GTFS: ERROR 030168: The network dataset cannot be created from template xml file.
Hi, I've done multiple GTFS-analyses over the last years, using Swedish road and GTFS data. Thank to the following guide it's been fine - up until now. https://pro.arcgis.com/en/pro-app/latest/help/analysis/networks/create-and-use-a-network-dataset-with-public-transit-data.htm Using my normal steps, I come to "Create the…
-
GTFS to Public Transit Data Model ERROR 002924
Hi All, I am trying to create recreate a transit network for my city using the GTFS data through the GTFS to Public Transit Data Model. I've been following along with the ESRI tutorial and so far everything has been successful until this point. I was able to use the GTFS data create the bus stops and routes using GTFS…
-
ERROR 000354 when calling Connect Public Transit Data Model To Streets in python script
Hello, I'm getting "ERROR 000354: The name contains invalid characters" at line 59 of the attached python script, at the ConnectPublicTransitDataModelToStreets call: # Imports import arcpy import os import pandas as pd from arcgis.features import GeoAccessor, GeoSeriesAccessor # Paths proj_dir =…
-
public transit network dataset does not get off train
Hi, I have created a Public Transit Network Dataset out of OSM-street data and official gtfs-data. It mostly works, but one very important connection does not. And I can't find the reason. The analysis uses the Public Transit Network, get's off the train, traverses the StopConnector, but does not procede to use the street…
-
Which street data should be utilized to create a network dataset alongside public transit data?
I have two sets of network datasets: (1) a road network and (2) a walking and cycling network. To create a GTFS transit network using the Street, should I combine these two datasets, or is using just (2) sufficient? I assume we only need the walking paths to connect to the transit stops. Once connected, travelers will…
-
Dynamically changing Travel_Mode in PrepareTimeLapsePolygons
I have no idea if this is possible, but thought it was worth asking in an effort to avoid manual work. I'm accessing Transit Network Analysis Tools (v0.8.0) toolbox in a python notebook (Pro v3.1). My GTFS network is using the standard template available from ESRI. I want to run several scenarios of altered mode attribute…
-
Calculate Accessibility Matrix for large metro region
Hello. I'm struggling to run the Calculate Accessibility Matrix tool for a metro region, following this workflow: https://www.youtube.com/watch?v=FAmaK1fVpyY. After running for several days, I get "OSError: [Errno 24] Too many open files". I presume I'm hitting the OS open file limit because I'm attempting to solve the…
-
Display Results of OD Cost Matrix csv file
I am trying to calculate the mean travel time from a set of origins to a set of destinations over a time window and display the results. This is very similar to creating an isochrone map for several destinations, however I would like to be able to show the average travel time for each minute over a window of time. This is…
-
Relation between GTFS shapes and GTFS LineVariant
Hello, After I loaded my GTFS data on ArcGisPro, i've deployed my GTFS's shapes with this tool:https://pro.arcgis.com/fr/pro-app/latest/tool-reference/public-transit/gtfs-shapes-to-features.htm This one deploy my shapes directly from my GTFS datas (shapes.txt file). Here is the table of the layer when deployed: (The right…
-
Output individual O/D trip stats in Calculate Accessibility Matrix
Hi @MelindaMorang , I am trying to get the output that was available in the older tools in ArcMap now in Pro. The calculate time matrix tool used to have an option to save the individual calculations. That is, I need the output of total travel time, length, walk time, wait time, etc. for each O/D pair for each time of day…
-
Calculate Accessibility Matrix Inconsistent Results
Hello, I am having an issue with the Calculate Accessibility Matrix tool from the Transit Network Analysis toolset. I ran this script using a selection of Census Blocks as my origins with a larger set of Census Blocks as my Destinations. I followed the same workflow as shown here:…
-
Calculate Travel Time Statistics - run in parallel
Hi folks, Just found the Transit Network Analysis tools. Fantastic job, they are awesome. I'm really hoping to use the Calculate Travel Time Statistics tool on a city-wide transit network. Any chance you have a version that can use parallel computation hanging around I can test? I want to use the average transit time as an…
-
Error in GTFS To Public Transit Data Model Tool
Hello, I received the above error message when I tried to use this tool. I don't think it's an issue with my GTFS data, since a year ago I used this tool last year in v.2.8 when it was called "GTFS To Network Dataset Transit Sources tool" and it worked fine. With the same dataset I still received the same error. I see the…
-
Empty output generated by Copy Traversed Source Features tool
Hi there, I am trying to use the Copy Traversed Source Features tool to look more closely at the routes being generated by my Network Dataset (which I created using the tutorial). However, it is creating an empty output and I'm not sure why. When I ran the route solver, I made sure to choose a date and time that is…
-
How to generate the actual geometry of line variant elements using "GTFS To Public Transit Data Model" tool?
The length and shape of the line feature aren't used by the Public Transit evaluator to calculate the travel time. When I create my data model tables from GTFS data using the GTFS To Public Transit Data Model tool, the line variant elements will be simple straight lines connecting adjacent transit stops. However, it is…
-
Bus lines from route analysis with public transit data
Hi there, I followed the tutorial to create a NDS from a GTFS-Source. If I now solve a routing problem through a route analysis layer it shows me the route and gives me information about the time it took etc. Is there a way to show me which Bus lines were taken? In another post there was a question on the direction…
