nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Problems with Topo to Raster DEM

MargaretSneeringer

Hi all,

I have a question about using the DEM created by Topo to Raster in ArcScene (10.2). When I try to set the base heights so that the DEM displays as a 3D surface, I don't have the option to "Use elevation values in the layer's feature." Any suggestions on how to fix this, or what I may have done wrong? I generated the DEM from a georeferenced contour line file.

I should mention that I have only recently started getting back into GIS after several years away, and it's entirely possible that I have forgotten a crucial step.

Thanks,
Meg

[ATTACH=CONFIG]27817[/ATTACH]

base heights problem.png

Finde mehr Beiträge mit dem Tag

Accepted answers

XanderBakker

Hi all,

I have a question about using the DEM created by Topo to Raster in ArcScene (10.2). When I try to set the base heights so that the DEM displays as a 3D surface, I don't have the option to "Use elevation values in the layer's feature." Any suggestions on how to fix this, or what I may have done wrong? I generated the DEM from a georeferenced contour line file.

I should mention that I have only recently started getting back into GIS after several years away, and it's entirely possible that I have forgotten a crucial step.

Thanks,
Meg

[ATTACH=CONFIG]27817[/ATTACH]

Hi Meg,

In the top of the dialog you'll see "Elevation from surface" you should change the option to "Floating on a custom surface".
Then your raster demtest3 will be used for elevation.

The option "Use elevation values in the layer's feature" is only for vector data and your DEM is raster.

Kind regards,

Xander

All comments

MargaretSneeringer

Dear Neil and Xander,

You know, I just figured out what the problem was a moment ago. The DEM is lat/long, but the elevation values are in meters. So I was able to change the conversion to scene units from 1.0 to 0.000015, and everything looks right now. When I was doing this a few years ago, my prof insisted on UTM, so there was never a conversion issue.

Thanks again for your help!
Meg

NeilAyres

Meg,
what's the coordinate system of your dem?
Please post the coord sys tab & extents tab of the properties page here.
Thanks,
Neil

MargaretSneeringer

Dear Xander,

Thank you for your feedback. I tried what you suggested, but when I did, the layer completely disappeared. I tried "zoom to layer," and the scene is still blank. Any further suggestions?

Thanks,
Meg

XanderBakker

Hi all,

I have a question about using the DEM created by Topo to Raster in ArcScene (10.2). When I try to set the base heights so that the DEM displays as a 3D surface, I don't have the option to "Use elevation values in the layer's feature." Any suggestions on how to fix this, or what I may have done wrong? I generated the DEM from a georeferenced contour line file.

I should mention that I have only recently started getting back into GIS after several years away, and it's entirely possible that I have forgotten a crucial step.

Thanks,
Meg

[ATTACH=CONFIG]27817[/ATTACH]

Nimm an der Unterhaltung teil

Angemeldete Mitglieder können Beiträge verfassen, Updates folgen und mehr. Neu hier? Registriere ein kostenloses Konto.

Schnellzugriffe

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.