nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

publikování texturované sítě z drone2map do AGOL nefunguje

johnbrosowsky

<\/HEAD>

Pro mě publikování texturované sítě z drone2map do AGOL nefunguje. Síť se na mapovém zobrazení drone2map zobrazuje perfektně, a když kliknu na možnost sdílet scenelayer do mé organizace AGOL, zdá se, že to funguje. Nicméně, když se pokusím zobrazit scenelayer z AGOL ve scene vieweru, objeví se v legendě a přiblíží se na správné místo na mapě, ale 3D texturovaná síť se nezobrazí. Předpokládám, že by to mělo momentálně fungovat, máte nějaké tipy, jak to rozběhnout? <\/P><\/BODY><\/HTML>

Najděte více příspěvků označených jako

Accepted answers

All comments

MCAGIS

We are using GCP's. Mesh appears in Drone2Map, but in AGO it is below the surface. Seems like projection is set to WGS84 UTM's. I assume standard projection in scene viewer in AGO is WGS84, so not sure where the problem lies? Any help is greatly appreciated.

cnnlly

Hi Lars,

I was having the exact same issue, but once I added in some ground control points, processed the data and shared it with ArcGIS Online, it worked perfectly! The help Manage GCPs—Drone2Map for ArcGIS Help | ArcGIS isn't very helpful but I managed to do it.

Carmel

Lars_ElmkærChwastek

Hi Anthony,

Your comment about the mesh being below the globe surface is an eye opener for me. I've never been able to see my mesh, so that might be the reason.

I'm a bit confused as to why it should be below the surface though. When loading the images at the creation of the Drone project, the z-value is for instance approximately 33 meters for my latest project. Why would Drone2Map suddenly move everything below ground? Point cloud and mesh are both "projected" below the surface.

I can move the point cloud above the surface via Cartographic offset, but that is not a viable solution...

Another thing is, that when zooming to my mesh in Drone2Map, it jumps to 0,0 outside the west african coast, even though my Orthomosaic is placed correctly in Denmark...

Any thoughts?

MattFlowerday1

We have also been encountering the same issue, however sometimes it does display just takes a long time to work. Scene package displays ok in Pro, Earth and D2M. (we are using GCP's)

AnthonyMason

John,

Currently the Textured Mesh being created as a scene layer package in Drone2Map is a single level of detail (lod) mesh. Because of this, there is a delay in the first draw of the mesh in AGOL, and after the first draw it is very responsive.

Try to wait and see if it draws. If it is not drawing within 30 seconds then there may be an issue with the elevation values of the mesh and it might actually be beneath the surface of the globe. If this is the case, you will need to add ground control points (GCPs) to your project and process again.

In future releases we will support multi lod meshes to make this experience a better one.

Please let me know if this helps and if we can be of further assistance.

Thanks,

Tony Mason

Product Manager - Drone2Map

Připojte se k diskusi

Přihlášení členové mohou přispívat, sledovat aktualizace a další. Jste tu noví? Zaregistrujte si bezplatný účet.

Rychlé odkazy

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.