Předpokládám, že odpověď je ne, ale chtěl jsem se ujistit, protože podle mých znalostí nedošlo k zásadním změnám platformy. Má tým v plánu vytvořit verzi 10.3 během příštích šesti měsíců, nebo bychom měli počítat s používáním 10.2.2 ještě nějakou dobu?

nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Budou se nástroje ArcHydro verze 10.2.x instalovat na 10.3?

curtvprice

<\/HEAD>

Předpokládám, že odpověď je ne, ale chtěl jsem se ujistit, protože podle mých znalostí nedošlo k zásadním změnám platformy.<\/P>

<\/P>

Má tým v plánu vytvořit verzi 10.3 během příštích šesti měsíců, nebo bychom měli počítat s používáním 10.2.2 ještě nějakou dobu?<\/P><\/BODY><\/HTML>

Najděte více příspěvků označených jako

Arc Hydro

Accepted answers

ChristineDartiguenave

There is a 10.3 version available for Arc Hydro (10.3.0.1) that can be downloaded both from the ftp site and from the following location:

http://downloads.esri.com/ArcHydro/ArcHydro/Setup/10.3/

Christine Dartiguenave

Esri Water Resources Team

All comments

ChristineDartiguenave

It will not. You need to install the 10.3 version for ArcGIS 10.3/10.3.1. You can download the latest build from the following location

http://downloads.esri.com/archydro/archydro/setup/10.3

Christine

Christine Dartiguenave

Esri Water Resources Team

Yessica_NataliaRamirez

Thank you so much! ArcHydro tools is already working on ArcGIS 10.3.1

NICOLAPEDDIS

Every version of arcgis have the proper archydro installer

arcgis 10.2 and 10.2.x-->yellow.esri.com - /archydro/archydro/Setup/10.2.x/

arcgis v10.3 and 10.3.x--> yellow.esri.com - /archydro/archydro/Setup/10.3/

you need always to choose the last build available, and apply every patch to your arcgis, to avoid problems.

AllenMcCoin

Unrelated to the actual question, although I feel the content is suitable for this thread.

I had a major issue with installing it into my computer, the arc hydro 10.3.x. The arc hydro tool was trying to save through a folder path that no longer existed in my drive. For some reason when I updated from version 10.2.x to 10.3 for my Arc Map, it erased ARCGIS home file from my drive. Follow the error and create the path that is in the error. Create a new folder and load up all the relevant folders, particularly the .bin file. After that it works like a dream. I hope this helps anyone that has shared the same frustration as I have had.

Cheers,

Allen McCoin

ChristineDartiguenave

There is a 10.3 version available for Arc Hydro (10.3.0.1) that can be downloaded both from the ftp site and from the following location:

http://downloads.esri.com/ArcHydro/ArcHydro/Setup/10.3/

Christine Dartiguenave

Esri Water Resources Team

ThomasColson

I "think" that

ArcHydroTools64	0	Not DESKTOPBACKGROUNDPROCESSINGVERSION >= "10.2" And Not AGSVERSION >= "10.2"
AGSSupport	0	Not AGSVERSION >= "10.2"
ApFrameworkM	0	APFRAMEWORKVERSION
ApFrameworkM64	0	APFRAMEWORKVERSION64

is what it's looking at. I'm using the 64-bit version of the installer. If you delete that statement? Unfortunately I don't have any machine I can test this on.

V_StuartFoote

Tom colson‌, *,

First thing I looked for when reviewing with Orca but could not find it. If you spot the stanza to edit, post it and I'll give it a go. Otherwise we'll need to wait for the Water Resources group to post revised installer. Christine Dartiguenave‌ and comment?

Stuart

ThomasColson

I have found that by editing the MSI file with ORCA does wonders for tools that perform a software version prerequisite check. Just remove the line that has something to do with the version of ArcMap. Granted, ArcHydro (and others) may not have been compiled against 10.3, and you may get some unexpected errors. I've only encountered one issue with a tool that was compiled for 10.1....forced an install for 10.2 and only one function doesn't work.

V_StuartFoote

Finally got around to checking, and the 10.2.0.85 msi package installer fails its PreInstall checks with this error:

ArcHydroTools_Installer_failsWith_Desktop_10.3.PNG

Likely a simple adjustment in the installer, but it will need to be rebuilt for 10.3

Stuart

Připojte se k diskusi

Přihlášení členové mohou přispívat, sledovat aktualizace a další. Jste tu noví? Zaregistrujte si bezplatný účet.

Rychlé odkazy

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.