Snažím se spustit nástroj Watershed Delineation v buňce Notebooku v ArcGISPro 3.3. Nástroj funguje dobře z panelu Geoprocessing, ale pokud zkopíruji Python skript do buňky Notebooku, selže s chybou: ' modul 'arcpy' nemá atribut 'archydropro' Zkoušel jsem importovat watersheddelineation. Zdá se, že to běží, ale nepomáhá. Zkoušel jsem importovat arcyhydro a archydropro a oba selhaly.

nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

spouštění nástrojů archydro v ArcPro Notebooku

KevinUrbanczyk

Snažím se spustit nástroj Watershed Delineation v buňce Notebooku v ArcGISPro 3.3. Nástroj funguje dobře z panelu Geoprocessing, ale pokud zkopíruji Python skript do buňky Notebooku, selže s chybou: '<\/P>

modul 'arcpy' nemá atribut 'archydropro'<\/PRE>Zkoušel jsem importovat watersheddelineation.  Zdá se, že to běží, ale nepomáhá.  Zkoušel jsem importovat arcyhydro a archydropro a oba selhaly.   <\/P>

Najděte více příspěvků označených jako

Water Resources

Arc Hydro

Accepted answers

DeanDjokic

Kevin,

Please follow EXACTLY the parameter list as I provided. Not sure where you came up with the “DoDelineateWatershed” syntax, but it is not the correct list of parameters for the Watershed Delineation function (you have two extra parameters you are setting to None and the order is incorrect – throwing everything off). Also, I would not rely on relative paths to the input and output layers but would provide full path – e.g. instead of:

str_raster = “str.tif”

use:

str_raster = r”c:\\pathtoproject\\pathtorasters\\str.tif” (with correct paths of course).

That goes for both raster and vector layers.

You noted in your original post that the tool correctly works when run from the gp pane (otherwise I would have suggested to run it like that first to make sure all your inputs are correct). Before running it again (either through code or UI) check your input point FC (“mp” FC?) and set BATCHDONE field to 0 if need. Each time you successfully run watershed delineation on a point, its BATCHDONE will be set to 1 and will not be processed next time around you run that function.

Dean

All comments

KevinUrbanczyk

The full path works.

The DoDeleateWaterhsed syntax came from running the watersheddelineation tool in the python window per a suggestion from archhydro@esri.com. It had 2 extra variables: 'hydroidfield' and 'drainidfield'. I don't think I need the python window now that it is running in a notebook cell.

Thanks for the help.

DeanDjokic

Kevin,

str_raster = “str.tif”

use:

str_raster = r”c:\\pathtoproject\\pathtorasters\\str.tif” (with correct paths of course).

That goes for both raster and vector layers.

Dean

KevinUrbanczyk

I tried this after viewing the list of variables for the watersheddelineation tool in the python window (see attached screen capture). This cell runs without an error but does not appear to produce any result:

import arcpy

import watersheddelineation

#------------------------------------------------------------------------------------

# code to define all required parameters: in_dp, snap_distance, flowdir_raster, str_raster, strsnap_raster, catchment_fc, adjointcatchment_fc, out_wshfc, out_spp

# note that snap_distance should be defined as a string, e.g. “100” for 100 units.

#------------------------------------------------------------------------------------

# apply arc hydro watershed delineation for batch points

in_dp='mp'
snap_distance='10'
flowdir_raster='fdr.tif'
str_raster='Str.tif'
strsnap_raster='Str.tif'
catchment_fc='Catchment'
adjointcatchment_fc='AdjointCatchment'
out_wshfc='wshed_out'
out_spp='wpt_out'

processor = watersheddelineation.WatershedDelineation()

processor.DebugLevel = 0

processor.bCallFromPYT = False

params = (in_dp, snap_distance, str_raster, strsnap_raster, catchment_fc, adjointcatchment_fc, flowdir_raster, None, None, out_wshfc, out_spp, None, None, None)

t_results = processor.execute(params, None)

# results are: (sOK, out_wshf, out_spp)

Screenshot 2024-09-18 064958.png

6- INX_Puertos Desarrollados en un Entorno Competitivo_ESP.pdf

DeanDjokic

Kevin,

Please review https://community.esri.com/t5/water-resources-documents/arc-hydro-calling-arc-hydro-tools-in-python-pdf/ta-p/920821 for recommendations on how to run AH tools in python. The doc is a bit outdated, but covers the basics that should get you started. It does not have explicit Notebook section, but section 2.3 applies to Notebook implementation directly.

Specifically, for the watershed delineation function, the syntax should be something like (assuming that Arc Hydro tools are properly installed and operational on the system):

import arcpy

import watersheddelineation

#------------------------------------------------------------------------------------

# code to define all required parameters: in_dp, snap_distance, flowdir_raster, str_raster, strsnap_raster, catchment_fc, adjointcatchment_fc, out_wshfc, out_spp

# note that snap_distance should be defined as a string, e.g. “100” for 100 units.

#------------------------------------------------------------------------------------

# apply arc hydro watershed delineation for batch points

processor = watersheddelineation.WatershedDelineation()

processor.DebugLevel = 0

processor.bCallFromPYT = False

params = (in_dp, snap_distance, flowdir_raster, str_raster, strsnap_raster, catchment_fc, adjointcatchment_fc, out_wshfc, out_spp, None, None)

t_results = processor.execute(params, None)

# results are: (sOK, out_wshf, out_spp)

Dean

Připojte se k diskusi

Přihlášení členové mohou přispívat, sledovat aktualizace a další. Jste tu noví? Zaregistrujte si bezplatný účet.

Rychlé odkazy

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.