nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Is Collector compatible with a Trimble R1 GNSS receiver using the Trimble Viewpoint RTX correction service?

AmandaRenner

Does anyone know if you can use the Trimble Viewpoint RTX correction service with a Trimble R1 GNSS receiver and Collector? I'm having trouble finding any documentation on it. Trimble mentions that it is compatible with all of their data collection apps like TerraFlex but I'm not seeing any other non-Trimble software on the list.

Thanks!

Najděte více příspěvků označených jako

Accepted answers

All comments

AlbertoMillan_Melendez

Collector Sneak Peak.PNG

AlbertoMillan_Melendez

They are working on that !!

Regards

MAGICMuscatineAreaGeographicIn

Alberto

Yes the Trimble R1 is compatible with collector. It takes over your internal GPS on the mobile device that you are using collector on. We just completed testing with the R1 and collector and we see a reliable submeter solution and we even see sub 2ft because you can use an app developed by Trimble called "GNSS Status" to dial into a real-time base station if one is available and receive that correction.

MAGICMuscatineAreaGeographicIn

Sorry Amanda I replied to Alberto and not you

AlbertoMillan_Melendez

Hi Mark ,

You Know if there is a document available that described the steps to configured the R1 with an IOS device (Iphones,Ipads)?

Regards,

MiaogengZhang

SBAS or real-time base station will work with Collector. But currently RTX correction source doesn't work with Collector.

AmandaRenner

Thanks Miaogeng - Do you know if this is something that will be added with future releases of Collector?

LeaDyrholm_Hansen

If a company needs the data measurements instantly, because the positions are used in related workflows right after the measurements have been performed, how would you then do the transfer of data?

Data measurements from the Trimble Rover are streamed via the Trimble controller directly to the database.
The Collector App receives the data measurements from the Trimble Rover.

MAGICMuscatineAreaGeographicIn

As long as the device that you have collector loaded on has an internet connection you should be streaming your data directly back to the office. One thing to remember is publish your feature service in WGS84. As long as collector recognizes your rover then collector understands Trimble rover location.

LeaDyrholm_Hansen

Thanks Mark, so that means that it works in 'the same way' as using the GPS in the mobile device. I'll try it out. Do you also know if is possible to use a Trimble Rover with Collector?

DanAllen

Apple's core location services rounds to the decimeter level for elevation from what i have seen using the EOS GNSS receiver. Does the Trimble App override the core Apple location feed and allow points to be stored to a lat long precision of 8 decimal places? Or does it get rounded up?

JulindaDyli1

Dan Allen. I have no idea about EOS GNSS. As i know something for sure is that you can't say that you can achieve that accuracy worldwide. I know in Europe with R1 you can get 10 cm . But in different continents depend from coverage of the satellites, type of satellite and correction signal. So same is even for iphone. Depend from your location. 🙂

From:"Dan Allen" <geonet@esri.com>

Date:Thu, 8 Oct, 2015 at 19:35

Subject:Re: - Is Collector compatible with a Trimble R1 GNSS receiver using the Trimble Viewpoint RTX correction service?

GeoNet

Is Collector compatible with a Trimble R1 GNSS receiver using the Trimble Viewpoint RTX correction service?

reply from Dan Allen in Collector for ArcGIS - View the full discussion

Reply to this message by replying to this email, or go to the message on GeoNet Start a new discussion in Collector for ArcGIS by email or at GeoNet Following Is Collector compatible with a Trimble R1 GNSS receiver using the Trimble Viewpoint RTX correction service? in these streams: Inbox

This email was sent by GeoNet because you are a registered user.

You may unsubscribe instantly from GeoNet, or adjust email frequency in your email preferences

DanAllen

Until told otherwise, or a new update, it appears Collector just is not setup to collect high accurcay GPS data, even if you can connect to a bluetooth GPS receiver. It does not store a Z elevation even if the feature is z enabled, and it does not store PDOP, horizontal, vertical precision values typically associated with High accuracy GPS.

I am hoping someone from ESRI can clarify, and or provide a status update on better support for RTK GPS in hopefully the upcoming release of Collector.

MiaogengZhang

Dan,

Thanks for your feedback. From Collector for ArcGIS v10.3.4 is out | ArcGIS Blog , you can see we are working on better support for high accuracy solution. The initial release v10.3.5 will include the following capabilities:

High accuracy GNSS receivers – this includes support for external GNSS receivers (datum transformation settings, read and display of accuracy from external receivers, notifications when connected/disconnected).

ClairePook

Hi, I've been using the Collector App with Trimble's R1 to collect point data in the UK.

The R1 is receiving corrections via Trimble's Viewpoint RTX service.

I have just read the following page (Using GNSS Receivers with Collector for ArcGIS | ArcGIS Blog)

which seems to suggest that the ViewPoint RTX service is not using WGS84, but rather a national reference frame (ITRF).

Is there a chance that the points I am capturing with the Collector App are not in WGS84 as I first thought?

I have been extracting and projecting my points into British National Grid, and finding that they all appear approx. 5m South of where I had expected..

Many thanks.

MiaogengZhang

The difference between WGS84 and ITRF is quite small. That should not be the reason of 5m shift. Can you share more details about how you extracted and projected your points into British National Grid? Also how do you configure your webmap, such as basemap, feature service spatial reference?

MuneshwarParasram

How do you retrieve the coordinates collected using the Collector app the GNSS utility app and the R1 GNSS receiver if you are not using an internet connection outdoors? Where can i download the coordinate data?

Připojte se ke konverzaci

Přihlášení členové mohou přispívat, sledovat aktualizace a další. Jste tu noví? Zaregistrujte si bezplatný účet.

Rychlé odkazy

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.