nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Seznamování s Web GIS 5. vydání Kapitola 4 Tutoriály Vrstva incidents_points nedostupná

MichaelRoha

Dobrý den, během týdne jsem bez problémů pracoval na tutoriálech z kapitoly 4 a dnes jsem začal s 4.6 QuickCapture. V tutoriálu Field Maps 4.3/4.5 jsem úspěšně přidal a použil vrstvu incidents_points. <\/P>

Dnes jsem nastavil projekt QuickCapture v 4.6 a chtěl jej použít v 4.7. Ukazuje, že vrstva není dostupná. Šel jsem do mapy 4.3, kde byla původně přidána, a nyní se zobrazuje stejná chyba, i když dříve během týdne fungovala bez problémů. Také jsem ji zkoušel přidat do nové prázdné mapy a zobrazila se stejná chyba.<\/P>

Ačkoli vrstva nebyla aktualizována společností ESRI, ukazuje změnu dat k 10\/9 (dnes). Prosím o radu, protože to brání použití vrstvy a nemohu dokončit tutoriály.<\/P>

Publikoval jsem snímky obrazovky chyby v map vieweru a field maps.<\/P>

https:\/\/arcg.is\/1jn0fO0<\/A><\/P>

Děkuji!<\/P>

Najděte více příspěvků označených jako

Accepted answers

MichaelRoha

Well it ended up being something much simpler than all of that. I cleared the cache and the offline website data and then all of the maps and layers that I had constructed with incidents_points started working again. I have never understood why cache gets messed up like that with any website when it worked prior. I never think to do that when it isn't calling out a specific error related to cache. Oh well!

Thank you for your help.

All comments

Craig Carpenter

Hi Michael,

I just ran though it and didn't get an error, maybe try again? If that doesn't work make sure you created a reference layer (p. 144 steps 1-6). You won't be able to use the provided layer for the project and do have to create a referenced layer first, then add that newly created reference layer for use in the project.

Let me know how it goes,

Craig

MichaelRoha

Hi Craig,

Thank you for responding to my question. I followed the directions in 4.3 to create the incidents_line layer and then opened in Map Viewer and made the changes to complete that tutorial. Tutorial 4.4 Step 5+ is where the problem is.

As I mentioned in my original message, this worked originally when I created it last week. Now it's giving the error message about not loading as per the jpg I uploaded called "incidentspoint error in web map". I tried going through the adding process again and it won't even add it. I removed the layer and then attempted to add it that way to no avail.

Are you saying that I need to add a blank layer separately as was done with the incident_line layer in 4.3, pull in the incident_points, then add it inside Map Viewer with the existing incidents_line layer? If so then the tutorials don't specify that workflow.

Thanks,

Mike

Craig Carpenter

I was just referring to 4.6 where the author has you search for the "incidents_point" layer he provided, and then make a reference layer.

I just tested searching for and adding the layers again and didn't have a problem, try deleting that map, opening a new one and adding the layers again.

Let me know if that works, if not we can figure something else out.

MichaelRoha

Thank you for your help.

Připojte se ke konverzaci

Přihlášení členové mohou přispívat, sledovat aktualizace a další. Jste tu noví? Zaregistrujte si bezplatný účet.

Rychlé odkazy

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.