nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Survey123 -- relevant field won't allow two values

KendraStraub

Hello,

I would like to make groups in my Survey123 form relevant depending on the response to another question.

The question is which protocol the end user is using: Crown Health, Biocontrol, or Both.

If they select Both, I would like both groups (Crown Health and Biocontrol) to be visible/relevant. Is they select Crown Health, I would like to make only the Crown Health group relevant/visible. Is they select Biocontrol, I would like to make only the Biocontrol group relevant/visible.

I have tried the following in the group relevancy for the Crown Health group:

${Protocol} !='Biocontrol'
${Protocol} ='Both' OR ${Protocol} ='CrownHealth'
${Protocol} ='Both' OR 'CrownHealth'
${Protocol} ='Both' , 'CrownHealth'

None have worked, can anyone help out with this one?

Thanks,

Form 1.xlsx

Find more posts tagged with

Accepted answers

JamesTedrick

The statement

${Protocol} = 'CrownHealth' or ${Protocol} = 'Both'

works for me. Note the lower-case 'or'.

All comments

MilesMcCoy-Sulentic

new to survey123 and not sure if this is the right place for this question, but I want to pop up a warning note if a species is observed outside of it's known range, based on county. I am using a cascade select and a repeat question to record all species found at a site. My species data also has a column with a comma-separated list of counties where it is known to occur. I was thinking that I could use a relevant statement for a note that would occur only when the survey location county string is not found in the list of "Range" counties for each species, but I'm struggling to piece it together.

Thanks

Survey Tab

type	name	label
text	example	Example
select_one county	county	County
begin repeat	plantList	Species
select_one species	species	Select Species:
end repeat
note		outside known range

example of species data from choices tab

list_name	name	label	Range
species	Pseudelymus_saxicola	Pseudelymus saxicola	Beaver, Box Elder, Cache, Carbon, Daggett, Davis, Duchesne, Emery
species	Abies_sp.	Abies sp.	Cache

species

Achnatherum_parishii

Achnatherum parishii

Carbon, Daggett, Davis

BuffaloCoWI

Yep that worked perfectly.. having the value in the name field was this issue. what was tripping me up was that in the survey tab for name it forces strings. I didn't realize it would be different for choices. Makes total sense now.

Thanks again James... you've been a huge help.

Jason

JamesTedrick

A few issues probably are tripping you up:

1) In your list, the 'name' column should contain the values you are going to use in the calculation

2) The calculation should be in a second question, either decimal, calculate, or note (decimal gives the opportunity for user input if the calculation is only a reasonable default that can be corrected, calculate will store the answer without the user seeing, note provides a read-only reference to the user).

To take your tables above:

list_name	name	label
holesize	2.5	1/4 inch
holesize	3.5	3/16 inch
holesize	4.5	5/32 inch

type	name	label	calculation
select_one holesize	target_size	Target diameter
decimal	holesize_calc	Hole Size calculation	${target_size}*1.3

BuffaloCoWI

How would I approach a "Select_one" where I need to assign a numerical value to each choice so that a calculation can be made against the selection? I would assume that this must be simple... but the proper syntax is just escaping me for the calculation. Any thoughts?

list_name	name	label	value
holesize	holesize1	1/4 inch	2.5
holesize	holesize2	3/16 inch	3.5
holesize	holesize3	5/32 inch	4.5

type	name	label	calculation
select_one holesize	holesize_calc	Hole size calculation	(????) * (1.3)

BuffaloCoWI

Yep that did the trick... I hadn't seen that bit of info.

Thanks James...

Jason##

JamesTedrick

As opposed to the "question=value" formula pattern, you probably want to use the "selected(question, value)" function - Relevant expressions—Survey123 for ArcGIS | ArcGIS

BuffaloCoWI

I have a similar question a regarding "select_multiple." As of right now I can only get only one of the selected groups to be viable at one time.. Selecting more than one makes them everything disappear.

Form 4.xlsx

KendraStraub

Perfect! Thank you. I didn't know it was case- sensitive. Thanks for your rapid response.

JamesTedrick

The statement

${Protocol} = 'CrownHealth' or ${Protocol} = 'Both'

works for me. Note the lower-case 'or'.

Join the Conversation

Signed in members can post, follow updates, and more. New here? Register a free account.

Quick Links

Community Help
Find useful guides, FAQs, and documents to help you navigate and make the most of Esri Community.