Select to view content in your preferred language

Trouble With Traverse Call Outs

293
3
Jump to solution
06-03-2024 09:04 AM
Labels (3)
MattCanale
New Contributor

Good afternoon. I'm having trouble entering this call out in the traverse tool. Any thoughts? 

MattCanale_0-1717430577386.png

Thanks for the help!

1 Solution

Accepted Solutions
anna_garrett
Occasional Contributor III

so you have your chord bearing, arc length and radius. that's the ingredients you need for a curve.

in your traverse grid, enter the call as follows:

*make sure chord bearing is selected on the direction drop-down and arc length selected for the 4th column*

direction: n57-53-01e, enter

distance: 0, enter

radius: 15, enter

arc length: 17.39, enter

here's the documentation page: https://pro.arcgis.com/en/pro-app/latest/help/editing/enter-a-traverse.htm, it's been super useful since transitioning to pro was not easy

View solution in original post

3 Replies
VogtBoat
New Contributor III

Thanks for posting this question. I often run into the same issue. Sub-question: Where / from whom / does a GIS Technician learn how to enter these more advanced traverses? 

anna_garrett
Occasional Contributor III

so you have your chord bearing, arc length and radius. that's the ingredients you need for a curve.

in your traverse grid, enter the call as follows:

*make sure chord bearing is selected on the direction drop-down and arc length selected for the 4th column*

direction: n57-53-01e, enter

distance: 0, enter

radius: 15, enter

arc length: 17.39, enter

here's the documentation page: https://pro.arcgis.com/en/pro-app/latest/help/editing/enter-a-traverse.htm, it's been super useful since transitioning to pro was not easy

MattCanale
New Contributor

Perfect.

Thanks so much, Anna!

0 Kudos