POST
|
I found it: https://downloads.esri.com/support/downloads/other_/113-IssuesAddressedList_05212024.pdf Thanks
... View more
yesterday
|
0
|
0
|
107
|
POST
|
Hi - for the Issues address list link coming from the latest 'What's new in ArcGIS Enterprise 11.3 at: https://enterprise.arcgis.com/en/get-started/latest/windows/what-s-new-in-arcgis-enterprise.htm the 11.3 Issues Addressed List still brings up the 11.2 Issues Addressed List. Can anyone fix? Thanks, David
... View more
yesterday
|
0
|
1
|
126
|
POST
|
I would agree with both @JakeSkinner and @berniejconnors - our Federated site is a 2 machine cluster, 8 cores each. So for the site, I have the dynamic mapping service pooling set to 8 number of instances, giving me 16. But you shouldn't set the number of instances it can use to more than the number of cores you have. So as a rule of thumb for the dynamic service, I would publish no more than 30 simple map services services to the shared instance. In practice, I have about the same as Bernie, 15 -20 or so simple map image services. As for the warning about the dynamic service crashing, I do not see that very often and since there is not much I can do about it, I just ignore it. The service recovers and I move on. I use Monitor, and for my any of my shared or dedicated instances, I can see the % saturation. If I were to see one of my shared instances using up to like 75%, I would consider moving that instance to dedicated. Otherwise, that might be or maybe could be the cause of the dynamic map service instance crashing. . .
... View more
a week ago
|
0
|
0
|
46
|
POST
|
Ok guys - if they need to check with their respective teams, it might help if they had my case number, etc: Case: 03592799 Analyst: Daniel M. Me: David Coley, Sarasota County GIS
... View more
a week ago
|
0
|
0
|
42
|
POST
|
Actually, scratch that above. It does work, it just now takes over an hour over the network at the moment: Start Time: Tuesday, May 14, 2024 11:45:43 AM Locator build started Data processing started Processing Point Address role Finished processing data Finished initializing builder Initializing country info... Storing build info... Building location table... Building places table... Building relationships... Storing search index... Storing polygons... Building suggestions structures... Finalizing locator... Finished building locator Succeeded at Tuesday, May 14, 2024 1:01:20 PM (Elapsed Time: 1 hours 15 minutes 36 seconds) Not sure why yet . . .
... View more
2 weeks ago
|
0
|
0
|
52
|
POST
|
Hello - ArcPro 3.3 seems to be unable to create an address point (point address role) locator when data source is from a network share using the Create Locator geocoding tool. My address point layer contains about 300K address points, is projected in Web Mercator. It's a simple build, in place since 3.0, and I build new locators at each release. No problems through 3.2.x. Here, when I sourced the data from a file gdb on my local drive, i.e. (C:\StageDBs\ProdWM.gdb) the build took place in a little over 6 minutes. When over the network share: (\\. . .StageDBs\ProdWM.gdb) the tool is hanging on step 'Processing Point Address role'. All share and read\write permissions are in place.
... View more
2 weeks ago
|
0
|
1
|
89
|
POST
|
I am happy to report that there is a solution to this! In working with support last night we were able to perform certain queries and updates to certain tables contained in the the portal gwdb, all via the postgres command line interface. The updates will remove and then add languages, and upon completion of the workflow, the English language pack is fully available, thus enabling (for us) the Instant Apps template and config pages, as well as restoring Map Viewer Symbol symbol categories. I cannot speak to a re-gain of the Esri Basemaps content as we did not lose that part first reported here by @ShelbyZelonisRoberson I am not able to relay what we did exactly, but anyone affected by this should be able to work with their support analyst now to affect this repair. Support cannot yet say whether the fix will be included as a patch for 11.2 now or as part of the 11.3 release (or both) - they just don't know yet. FYI the Instant App issue for the Sidebar app does still exist, where the 'Sidebar' has become a "Footer' and the Filter tool is non-functional, and some other css issues, so looking forward to 11.3 for this fix, @KellyHutchins @ThomasColson @StevePoladian
... View more
2 weeks ago
|
0
|
0
|
41
|
POST
|
I am happy to report that there is a solution to this! In working with support last night we were able to perform certain queries and updates to certain tables contained in the the portal gwdb, all via the postgres command line interface. The updates will remove and then add languages, and upon completion of the workflow, the English language pack is fully available, thus enabling (for us) the Instant Apps template and config pages, as well as restoring Map Viewer Symbol symbol categories. I cannot speak to a re-gain of the Esri Basemaps content as we did not lose that part first reported here https://community.esri.com/t5/arcgis-enterprise-portal-questions/basemaps-unavailable-after-upgrading-to-11-2/td-p/1414057/page/2 by @ShelbyZelonisRoberson I am not able to relay what we did exactly, but anyone affected by this should be able to work with their support analyst now to affect this repair. Support cannot yet say whether the fix will be included as a patch for 11.2 now or as part of the 11.3 release (or both) - they just don't know yet. @ThomasColson FYI the Instant App issue for the Sidebar app does still exist, where the 'Sidebar' has become a "Footer' and the Filter tool is non-functional, and some other css issues, so looking forward to 11.3 for this fix, @KellyHutchins
... View more
2 weeks ago
|
0
|
0
|
112
|
POST
|
Yes and this affects any page, web app, etc, that still uses 'DOMNodeInserted' - basically anything that still references the DOM. Not just Enterprise, but Online as well, including this very GeoNet page.
... View more
2 weeks ago
|
0
|
0
|
123
|
POST
|
Here are the results of my language try: https://dnsname.scgov.net:7443/arcgis/portaladmin/system/content/languages/remove Error One or more requested language(s) cannot be removed as they are not yet configured, language=en. { "error" : { "code" : 500, "message" : "One or more requested language(s) cannot be removed as they are not yet configured, language=en. ", "details" : null } } And from an Add operation https://dnsname.scgov.net:7443/arcgis/portaladmin/system/content/languages/add Error One or more requested language(s) are not supported, language=en. Code: 500 { "error" : { "code" : 500, "message" : "One or more requested language(s) are not supported, language=en. ", "details" : null } } From an Update External Content try: {"status": "success"} – external content is enabled . . .
... View more
3 weeks ago
|
0
|
0
|
134
|
POST
|
What release of Enterprise are you working in? If 11.2, there are problems with some installs where the style gallery(ies) did not install properly.
... View more
3 weeks ago
|
0
|
0
|
89
|
POST
|
None so far @ThomasColson Support wants me to try and remove and then re-add the English language from portal admin with the idea being that upon an 'Add' our missing content may come back. Although it seems straightforward from the help, I don't know what to expect in terms of downtime, interruptions, or behavior.
... View more
3 weeks ago
|
0
|
0
|
188
|
POST
|
I moved over to Catalog and was able to batch calc raster statistics for 835 tif files in like 6 minutes. Fortunately I still have an 10.8.2 install on a laptop...
... View more
3 weeks ago
|
0
|
0
|
80
|
POST
|
Yes I am still working through this issue with support, and as noted above by @StevePoladian, our latest search of the postgres gwdb for -c "SELECT username FROM gw_users WHERE username LIKE '%esri%'" returns esri_apps esri_solutions esri esri_livingatlas esri_demographics esri_boundaries Support just suggested that the return for this query should have shown: "Based on the what languages the user has disabled at Portal Admin, we should not expect the following users to be returned: Bulgarian - Български - bg (false) Catalan - Català - ca (false) Hungarian - Magyar - hu (false) Slovak - Slovenčina - sk (false) Slovenian - Slovenščina - sl (false) Ukrainian - Україна - ukr (false)" Which are the languages portal has disabled by default. Perhaps support meant for me to perform a query for languages? Are languages in fact usernames? I don't know, but to me this doesn't follow. I replied to support and we'll see what's next, but they are suggesting that through Portal Admin I disable the English language and then re-enable, with the thought being that by re-enabling the English language that will bring back or re-sync missing or mis-directed content. I've never done this so I am not going to attempt this just yet - I don't know how Portal will be affected @ThomasColson @ShelbyZelonisRoberson
... View more
4 weeks ago
|
0
|
0
|
102
|
POST
|
I can't even get past 2 tif files without the either the tool freezing up or my python script just hanging after taking 3 - 5 minutes per file, no matter if I am using a local workspace or across the network. Typically, I run something like: import sys, os, arcpy, time, smtplib
from datetime import date, datetime, timedelta
from arcpy import env
# Local variables...
message = ""
current_time = time.asctime()
todaysDate = date.today()
priorYear = str(todaysDate - timedelta(days=547)) #547
starting_time = time.time()
arcpy.SetLogHistory(False)
env.configKeyword= "DEFAULTS"
env.overwriteOutput = True
try:
env.workspace = "D:\\Imagery"
#env.workspace = r"E:\\Tiles\\GeoTIFF\\Property"
# Had to go into directory and give account full control - see if works for loop, after 2 files locks up
#env.workspace = r"\\networkshare\\imagery\\2024\\GeoTIFFs"
rasters = arcpy.ListRasters("*", "TIF")
for raster in rasters:
print(raster)
arcpy.CalculateStatistics_management(raster, "1", "1", "", "SKIP_EXISTING", "")
print (raster + " stats calculated")
message = message + "\n\n" + raster + " stats calculated"
except Exception:
# If an error occurred, print line number and error message
import traceback, sys
tb = sys.exc_info()[2]
e = sys.exc_info()[1]
print(e.args[0])
print ("Line %i" % tb.tb_lineno)
message = message + "\n" + "Line %i" % tb.tb_lineno
message = message + "\n" + str(e) And like I said, it won't get past 2 tif files before just hanging. I should mention I have almost 900 of these - out entire county, 3 band tif images, 4" resolution. I used the same script workflow above to BuildPyramids, that took about 8 hours. Not great, but I can live with that. @KenBuja - would you happen to have any ideas? Thanks, David
... View more
4 weeks ago
|
0
|
0
|
121
|
Title | Kudos | Posted |
---|---|---|
1 | a month ago | |
1 | 04-24-2024 02:04 PM | |
2 | 04-24-2024 11:37 AM | |
1 | 04-04-2024 12:53 PM | |
2 | 03-25-2024 10:55 AM |
Online Status |
Offline
|
Date Last Visited |
yesterday
|