IDEA
|
The Māori language uses macrons above vowels to lengthen them, as part of New Zealand's bicultural foundations it is appropriate to insert macrons into maps, services etc. in order to correctly display names. Currently ArcGIS does not support macrons, so we request that this be changed in order to be able to make our map and data outputs culturally appropriate. Request courtesy of Hurunui District Council and Kaikōura District Council, Canterbury, NZ
... View more
09-26-2019
09:17 PM
|
15
|
3
|
989
|
IDEA
|
The Māori language uses macrons above vowels to lengthen them; as part of New Zealand's bicultural foundations it is appropriate to insert macrons into maps, services etc. in order to correctly display names. Currently ArcGIS does not support macrons, so we request that this be changed in order to be able to make our map and data outputs culturally appropriate. Request courtesy of Hurunui District Council and Kaikōura District Council, Canterbury, NZ I have edited this to request support for other indigenous languages where possible, in light of my Australian friend's comment. Of course indigenous peoples worldwide should be represented by ESRI in their products :).
... View more
09-26-2019
09:17 PM
|
14
|
3
|
1394
|
IDEA
|
Thanks for that. I didn't have that checked, no, likely as I haven't seen a need to interact with it previously. Perhaps that could be enabled as a default, I would suspect that most users would want that. When checking auto-apply the 'updating feature attribute' info box came up and took several seconds, should applying the attribute change take that long? Ideally, as with ArcMap, I'd like to apply the edit immediately and move on quickly to the next feature. The attribute table is an option for this as a workaround, but previously the attribute pane was the better way to go as I've mentioned. So I guess I would suggest that the idea is now two-fold: - Make 'auto-apply' checked by default. - Make edit application immediate, without the 'updating feature attribute' info box appearing and forcing a pause.
... View more
05-28-2019
03:22 PM
|
0
|
0
|
1177
|
IDEA
|
See below for a demo of the prompt when the video finishes encoding:
... View more
05-28-2019
02:48 PM
|
0
|
0
|
1177
|
IDEA
|
Hi Kory. I was referring to the attribute window associated with the edit 'toolbar' on the right hand side of the screen (by default), i.e. the one in ArcMap on that toolbar so whatever you call the Pro equivalent - perhaps the 'attribute pane'? You have it as a tab on the right hand side of your screen shot. I wasn't referring to the attribute table as opened from the layer-> right click, with which I have no issue editing attributes. I prefer the 'attribute pane' on the right as it gives a tidier view of attributes and allows easier mass editing of them. Perhaps I wasn't very clear in my original post. So I'm not sure the idea/issue has been addressed yet.
... View more
05-28-2019
01:49 PM
|
0
|
2
|
1177
|
IDEA
|
Hi Kory, We don't use subtypes, it's a free text field. When I have two records selected from the same feature class and want to edit the same attribute for both (to different values) I get the prompt when moving from one feature to the other. This did not happen for the same feature class in ArcMap. There are other occasions when I can perform a number of edits without saving, but this one is one of those small but slightly irritating flow-stoppers. Anything on the undo button idea? It must have been suggested long ago, or am I missing where you can do that. I don't mean choosing not to save, but actively undoing with the one click i.e. a button. Thanks, Chris
... View more
05-23-2019
03:24 PM
|
0
|
1
|
1177
|
IDEA
|
The original idea has been changed to refer to making the 'auto apply' box in the attribute pane checked by default, and applying edits immediately without an information box appearing and it taking several seconds to apply an edit in the attribute pane before moving to another feature to edit. Currently when editing multiple features from the same feature class I get prompted to commit edits when I switch between features. E.g. for land parcel data I populate an ID for one, then move to the next to to the same but get interrupted by a commit prompt. This is a very conservative way to ensure that edits are saved, but also interrupts workflow too much. In ArcMap any number of edits could be performed before saving. If committing/saving edits in Pro could be tweaked to interrupt less and allow more work to be done between edits this would be great. When transitioning out of e.g. an attribute window or (if it is added) actively closing an edit session, those could be logical points to prompt for a save. Right now it is too frequent.
... View more
05-20-2019
02:33 PM
|
1
|
7
|
1424
|
POST
|
The link I posted a few days ago works for me, Paul's original link no longer works however. N.B. The 'GIS Officer' account this appears under and Scott Linton's account are both from the same organisation. My name is Chris and I posted both comments.
... View more
04-22-2019
02:57 PM
|
0
|
0
|
962
|
POST
|
This looks like a field typo, we had corrected the field T_ce_view_plot_interments.Internment_Date (note the 'Intern' rather than 'Inter') so the script appears to have been looking for a field that didn't exist. It didn't error out on not finding the input field, but instead threw the error above. Yes, that was it. Problem solved.
... View more
11-22-2018
02:43 PM
|
0
|
0
|
748
|
POST
|
I have been having the same issue as described at the following threads,with a date field being flagged as invalid in a feature class to feature class conversion: Date Field Conflict w Feature Class to Feature Class Conversion via Arcpy arcpy - Field Type Date invalid when run in Python, but not in Model? - Geographic Information Systems Stack Exchange I have tried the Stack Exchange workaround (second link above) in going via a temporary file geodatabase/feature class, but when trying to then transfer that into my intended destination I still get the same error. Code line is as follows, N.B. I did not write this script and am not sure when it was first authored: Int_fields="""Interment_ID "Interment ID" true true false 12 Long 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Record_ID,-1,-1;Interment_Type "Interment Type" true true false 20 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Grave_Ashes,-1,-1;Plot_ID "Plot ID" true true false 20 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Cemetery_Code,-1,-1;Surname "Surname" true true false 50 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Family_Name,-1,-1;Given_Names "Given Names" true true false 50 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Given_Names,-1,-1;Full_Name "Full Name" true true false 50 Text 0 0 ,First,"#""" + flInt + """,""" + IntM2 + """.Given_Names",FL_Interments_with_geometry,T_ce_view_plot_interments.Family_Name,-1,-1;Age "Age" true true false 20 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Age,-1,-1;Age_Type "Age Type" true true false 10 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Age_Type,-1,-1;Date_Deceased "Date Deceased" true true false 8 Date 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Date_Deceased,-1,-1;Date_Interred "Date Interred" true true false 8 Date 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Internment_Date,-1,-1;Occupation "Occupation" true true false 60 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Occupation,-1,-1;Place_Origin "Place of Origin" true true false 25 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Nationality,-1,-1;Funeral_Director "Funeral Director" true true false 60 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Funeral_Director,-1,-1;Clergyman "Clergyman" true true false 50 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Clergyman,-1,-1;Denomination "Denomination" true true false 60 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Denomination,-1,-1;Purchaser "Purchaser" true true false 50 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Purchaser,-1,-1;Purchase_Date "Purchase Date" true true false 8 Date 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Purchase_Date,-1,-1;Headstone_Inscription "Headstone Inscription" true true false 1000 Text 0 0 ,First,#,""" + flInt + """,""" + IntM2 + """.Headstone_Inscription,-1,-1""" arcpy.FeatureClassToFeatureClass_conversion(in_features=flInt, out_path=ws, out_name=Int2, field_mapping=Int_fields) My error messages are below: PYTHON ERRORS: Traceback info: File "D:\ArcGIS\Tools\Python scripts\Cemeteries_Updater.py", line 179, in <module> out_name=Int2, field_mapping=Int_fields) Error Info: ERROR 000278: Field mapping error: field type invalid for output field Date_Interred and input field T_ce_view_plot_interments.Internment_Date Failed to execute (FeatureClassToFeatureClass). ArcPy ERRORS: ERROR 000278: Field mapping error: field type invalid for output field Date_Interred and input field T_ce_view_plot_interments.Internment_Date Failed to execute (FeatureClassToFeatureClass). I'm unable to share source data but just looking for ideas on solutions/workarounds to convert a SQL view into a file geodatabase feature class and brig a date field across successfully. This started happening 3 weeks ago, and I am aware of no changes that we made to either our ArcGIS install or databases/feature classes/fields. It just seemed to start happening. I have tried importing this into a model builder model and running it that way, but still get the same error.
... View more
11-22-2018
12:50 PM
|
0
|
1
|
1101
|
POST
|
I need help with this. I want people to provide comments and vote through a Crowdsource Polling app but then protect their personal details and I can't see how.
... View more
11-08-2018
10:22 PM
|
0
|
1
|
962
|
IDEA
|
Currently the Crowdsource Polling app does not allow for a legend to be visible. This hampers the ability to provide a visual reference for features in the app, and should be a default option. At present the only workaround I have without Javascript skills and hosting the app on our own servers (we do not have an external server) is to create the legend as an image and add this to the help widget. Additionally, popups should be allowed to appear for layers other than the commentable layer.
... View more
11-08-2018
05:59 PM
|
10
|
8
|
2356
|
IDEA
|
Currently the Crowdsource Polling app does not allow for a legend to be visible. This hampers the ability to provide a visual reference for features in the app, and should be a default option. At present the only workaround I have without Javascript skills and hosting the app on our own servers (we do not have an external server) is to create the legend as an image and add this to the help widget. Additionally, popups should be allowed to appear for layers other than the commentable layer.
... View more
11-08-2018
05:59 PM
|
9
|
8
|
2018
|
POST
|
An additional question, how does adding a field then propagating to a view work for related tables? I have republished a service with schema changes and am looking to push these to the view without remaking it. Define Fields in the Visualisation tab does not show the related table.
... View more
11-01-2018
03:04 PM
|
0
|
0
|
902
|
IDEA
|
This would be a great add for sharing maps/apps, particularly for public viewing or consultation.
... View more
08-06-2018
05:02 PM
|
1
|
0
|
2769
|
Title | Kudos | Posted |
---|---|---|
2 | 05-29-2023 02:39 PM | |
1 | 10-18-2022 01:55 PM | |
1 | 09-11-2022 06:49 PM | |
1 | 07-18-2022 03:21 PM | |
1 | 05-05-2022 01:54 PM |
Online Status |
Offline
|
Date Last Visited |
05-30-2023
12:40 AM
|