POST
|
Hi there ExB Community, My team is using the map widget in Experience Builder for planning the next day and in the morning meeting when they divvy out each person's roles for the day. One comment/request they've come back with though is if I can change the way the zoom works in the map. It's too jumpy for them. Is there anyway to make the transitions smoother? One roll of the mouse takes us from Extent 1 to Extent 2 which is too much. They want to be able to see in between those extents. (Even better would be if it wasn't set amounts, but the user could freely zoom in and out.) It's enough of a deterrence for them that they've stopped using the Experience Builder I've made for them and are using ArcMap instead. Extent 2 In addition is it possible to get a scale bar set up like this? 1: 500,000. Something that shows like this rather than 100m / 500 ft in the bottom left hand corner or an option to show either or both types? Not sure if I'm using the correct terminology here., but they are used to the former looking like scale bar measurement.
... View more
08-14-2023
01:36 AM
|
0
|
2
|
819
|
POST
|
Thanks @ChristopherCounsell . This looks like a good article. I've read over it am going to give it a go with my parcels and points. I'll try and go the Arcade pathway in Map Viewer rather than in Experience Builder or prebaking in ArcPro for this one. If I can get it to work in symbology I'll make everything but the most recent building assessment point transparent.
... View more
08-09-2023
06:19 AM
|
1
|
1
|
312
|
POST
|
I've put together a dashboard which includes a map of building assessments. We've gone into the reassessment phase now, and they want the dashboard to only show the latest reassessment points now. I'm sure there is a way to do this in arcade- maybe a filter by or intersect? Multiple points (assessments) sit within a polygon parcel. Or maybe I'm really blanking and there's an even easier way to do it? The project was set up in an emergency scenario, so we didn't get related tables set up if you're wondering. Just want the green arrow dot to show within this parcel. Not the others. Sorry if I've posted in the wrong section. Wasn't sure where this question would best fall under!
... View more
08-09-2023
12:55 AM
|
0
|
3
|
398
|
POST
|
Also, haven't tested it out as a non-Administrator licence so maybe only I see the more info/metadata?
... View more
07-26-2023
12:26 AM
|
0
|
0
|
220
|
POST
|
Hi there, I haven't signed into my Hub site in a while, but noticed today that the more info panel/sidebar has reappeared. I have multiple cards on the homepage that you can click on and then that opens an individual experience builder in a new tab. I thought I had disabled the metadata/ grey info box as I haven't seen it for a while, but possibly something happened since the latest update? I did try in the settings to toggle off embedded app. It removes the metadata/grey box, but it also removes the header/banner which I want to keep. I want the user to feel like they are still in the same website/hub. I've put screenshots below of what I mean. If possible I would not like the grey box or any of the metadata accessible. The users want/need a simple interface. They get easily distracted and don't need to know the metadata details. Not to sound grouchy, but just wanted to provide a little context as to why I think it shouldn't be there. Thanks in advance for your help.
... View more
07-26-2023
12:25 AM
|
0
|
1
|
221
|
POST
|
Hi Automaters, Context I have a Flow set up so whenever a record is submitted from a Survey123 a new row gets added into an Excel spreadsheet table in Sharepoint. From previous ESRI forum postings I've found this expression for converting the date/time into my desired format. addseconds('1970-1-1', Div(triggerOutputs()?['body/feature/attributes/TargetDates'],1000) , 'dd/MM/yyyy') Problem However there's another problem. The date/time question in the survey sometimes gets answered. It isn't required, and it's not always necessary. From the Flow error feedback I gather I need to add in a null if statement similar to the below format, but with my lack of coding experience I can't figure out how to combine the two. I'm getting an invalid expression when I try to combine them. if(equals(triggerOutputs()?['body/feature/attributes/InspDate'],null), 'No inspection date recorded', convertTimeZone(addSeconds('1970-01-01',div(triggerOutputs()?['body/feature/attributes/InspDate'],1000)),'UTC','Pacific Standard Time','D')) I found the above expression here - https://community.esri.com/t5/arcgis-survey123-blog/managing-time-and-date-from-survey123-in-microsoft/bc-p/893399#M205. Error feedback from Microsoft Automate - https://learn.microsoft.com/en-US/troubleshoot/power-platform/power-automate/getting-errors-null-fields Is it possible to add a Condition Connector with Null expression at the start of the flow? The field is Null sometimes though, not always. I wonder if there are better/easier/more simple ways to get to my end goal. Either way the above are what I've found so far, but am not sure how to combine them. Possibly I could break them into two connectors like format any incoming date/times at the start or check for nulls, but still let them pass through at the start?
... View more
07-19-2023
08:11 AM
|
0
|
0
|
713
|
POST
|
Thanks for your reply @AlagiriVenkatachal . I work across a couple of ArcGIS Online accounts. We are using Survey123 in all of them. Once I made sure I was signed into the Survey123 for this account on another tab, and then checked my connection/ resigned in as you suggested above I was able to see the dropdowns I need. Automate may have thought I was trying to access a different AGOL accounts' S123.
... View more
07-13-2023
08:37 AM
|
0
|
0
|
162
|
POST
|
How did we all get on with this? I found a spelling mistake in one of the field names in my excel spreadsheet in sharepoint (which the submitted survey123 writes into), so I updated the spelling. That has caused my flow to not run properly anymore. Not sure if this is related to the token updates discussed in this thread or the latest ESRI update, but Automate can't seem to find the survey, which it could do before the update. All the original parts of the flow other then the mispelling field name updates work fine. This could very well be an issue on my end though as I'm still finding my feet in Automate. Any pointers would be appreciated. I tried testing in a new flow too.
... View more
07-10-2023
12:08 AM
|
0
|
3
|
723
|
POST
|
Hi S123ers, I keep circling back to this article, but it doesn't exactly answer my question I think... https://community.esri.com/t5/arcgis-survey123-blog/dates-and-time-in-survey123/ba-p/895528 This here really bothers my team. They want to see the date as DD/MM/YYYY when they are filling out the form. What I gather from the linked article is that a) there has to be a second/new field created to calculate the desired date time format. You can't do it in the same field. b) that still doesn't fix the problem of the date appearing in the wrong format at the time the user fills out the survey, only afterwards. How do I fix this? Is it something I control on my computer locale or agol locale? I'm working in Survey123 connect. The user accesses the survey on the desktop via web browser.
... View more
06-01-2023
02:15 AM
|
0
|
1
|
330
|
POST
|
Thank you so much @CoffeeforClosers . That was doing my head in! Fixed now!
... View more
05-31-2023
05:03 PM
|
0
|
0
|
1051
|
POST
|
Hi, Wondering if anyone has any thoughts on how useful/worthwhile it is to get the Premium licence in Power Automate to access ArcGIS. I'd really like to use the Get data from feature layer in ArcGIS Online and export it to a CSV file template (https://make.powerautomate.com/environments/Default-90d78e6a-0431-4d5f-916a-d3ab9c1a0bd9/galleries/public/templates/6b1e4d293f3442d2b551af87ee8108b0/get-data-from-feature-layer-in-arcgis-online-and-export-it-to-a-csv-file), but not sure how much the upgrade would cost and if it is worth that for the organisation or if other people have found ways to do the same process without a premium licence.
... View more
05-31-2023
01:39 PM
|
0
|
0
|
284
|
POST
|
Hi Automaters, New to using Microsoft Automate. Hoping this is a quick fix for someone. I have set up a flow so when someone submits a survey123 that info gets written into a spreadsheet in Sharepoint. It's working great! Except for the date/time format in two fields... The two fields are date fields in S123/AGOL, so I'm inputting them as dynamic content, and I want them to be in UTC + 12. I was advised this could work- putting in an expression. formatDateTime(addHours(utcNow(triggerOutputs()?['body/feature/attributes/Contact_date']),12),'dd/MM/yyyy HH:mm') The flow is failing though, and this is the error I'm getting. Unable to process template language expressions in action 'Add_a_row_into_a_table_-_Consult_on_effects_Contractor' inputs at line '0' and column '0': 'The template language function 'utcNow' expects its parameter to be of type string. The provided value is of type 'Integer'. Please see https://aka.ms/logicexpressions#utcnow for usage details.'. I posted in the Microsoft Automate Community forums on their website, but haven't gotten to the root of the problem yet. I thought maybe someone in this community has experienced it before since you're also AGOL users. Thanks in advance for your help.
... View more
05-31-2023
01:28 PM
|
0
|
2
|
1068
|
POST
|
This may be a stupid question, but so that means from the first time I set up a flow and sign in to Survey123/ArcGIS Online in Automate that's when the 90-day token starts, but this is planned to be fixed so I should set a reminder in my calendar 90 days from now just in case? And I'll know there's an issue/token has expired if I notice the flow has failed?
... View more
05-31-2023
01:22 PM
|
0
|
2
|
835
|
POST
|
Hi community, I've just gotten access to Microsoft Automate. I used to set up automations with Make/Integromat. I've set up a flow so every time an S123 record gets submitted a row in an Excel table gets updated in Sharepoint. Because I'm new to Microsoft Automate I wondered if there's anything I should be wary of? Like would is there the possibility it will eat up a lot of credits because the layer is always being watched? Or does anyone have any good videos, templates or resources they recommend for Automate/ESRI users?
... View more
05-30-2023
04:03 PM
|
0
|
13
|
1038
|
POST
|
Hi ExB Community, Does anyone know how the table widget decides which fields are default ticked for initial display? I was wondering if there is somewhere to control this before even entering the table widget because I have a lot of fields and the real estate for scrolling through this area is minimal. It can be quite tedious setting this bit up. It would be great to see if the interface could be made easier to organise the order the fields appear in too.
... View more
05-15-2023
08:30 PM
|
0
|
1
|
227
|
Title | Kudos | Posted |
---|---|---|
3 | 02-29-2024 04:25 AM | |
1 | 01-25-2024 12:05 AM | |
1 | 01-29-2023 01:47 PM | |
3 | 04-26-2023 08:01 PM | |
1 | 05-16-2022 11:31 AM |
Online Status |
Offline
|
Date Last Visited |
03-24-2024
04:40 AM
|