POST
|
Hello guys, I am new to the developer edition, when executing the batch file for the first time, it asked me to give whether the link of ArcGIS or Portal for ArcGIS, the arcGIS link works, but the Portal link does not, it says "impossible to access this link, the host name is wrong" (It is hosted on a local server) I have entered the link like that: "https://machinename.domaine.com:7443/arcgis" I am using Portal for arcGIS 10.6 and WAB DE 2.9, I can't find older versions to test as 2.6 and 2.7 to download Portal for ArcGIS AGOL/Portal for Non Profits Robert Scheitlin, GISP Rebecca Strauch, GISP Derek Law
... View more
09-07-2018
04:27 AM
|
0
|
4
|
885
|
POST
|
Robert, I have tried 2.6 and 2.7 and both of them show the same problem
... View more
09-07-2018
03:32 AM
|
0
|
5
|
879
|
POST
|
Hello guys, It's my fisrt time using a custom widget and adding it to my Portal following these steps: Add custom widgets—Portal for ArcGIS | ArcGIS Enterprise I tried to add the Esearch widget on: Enhanced Search Widget Version 2.7 - 2/23/18 When I try to use it, the link "Add a search layer" does not open a windows for me, instead it creates an empty line at "Search title" like in the image below: I don't know what's the reason, is it my fault ? Robert Scheitlin, GISP Rebecca Strauch, GISP
... View more
09-06-2018
07:40 AM
|
0
|
9
|
1187
|
POST
|
Hello guys, I didn't find the resource of this error, I had it on the 10.5 version and it kept showing when trying to configure the datastore, it says that the PostgreSQL folder is not found on C:\arcgisdatastore\pgsql9.3.12 any ideas ? com.esri.arcgis.datastore.common.DataStoreException: La tentative de configuration du stockage des données a échoué.. Extended error message: La mise à niveau de la base de données a échoué.. Extended error message: Racine du dossier PostgreSQL introuvable 'C:\arcgisdatastore\pgsql9.3.12'.
... View more
08-24-2018
03:40 AM
|
0
|
3
|
765
|
POST
|
Actually I was happy with your last answer because it would be easy for me, then I searched a liitle bit on the forum and found a contradiction between your suggestion and Mr. Derek Law answer on that post: https://community.esri.com/thread/121410
... View more
08-14-2018
10:16 AM
|
0
|
1
|
1371
|
POST
|
Thanks for the link, but excuse my bad knowledge, can I create my own custom widgets and add them to my Portal without having to host the application on my web server ? becaue I know there is a possibility to download the application, edit it and host it on my localhost, but I need to keep it hosted on Portal but at the same time have the ability to add custom widgets ! any links ?
... View more
08-13-2018
06:23 AM
|
0
|
3
|
1371
|
POST
|
Hi guys, I am new to WAB, and tring to discover it I have poped into the spatial filters, but something sounds missing for me ! look at the image: It shows that you will get only the features that are intersecting with the layer that you choose, BUT I want to get only that results that intersect with ONE ELEMENT in that feature layer, as example I want to get all the supermarkets (supposing I have a feature layer called suppermarkets) (apply on them a query) and from the result of this query I want to get ONLY the elements that intersect a city called Barcelona (supposing I have a feature layer called cities) any help please ? ArcGIS Online Team
... View more
08-13-2018
02:03 AM
|
0
|
8
|
2633
|
POST
|
Hello guys, I'm new to arcGIS Online, and I'm currently discovering teh widgets on it, I've created some shapefiles on ArcMAP, zipped them and added them to a map on AGOL my problem is, when trying to add any widget for my layers, the layers list is empty, meanwhile the layers are added to the map and they are showing on teh legend and layer list and they have an attribute table I don't know what's the problem ? please check the image my layers on the attribute table:
... View more
08-11-2018
08:04 AM
|
0
|
1
|
398
|
POST
|
I checked the log file and it says that it couldn't connect with PostgreSql، but why it is searching for postgres ?? because I want to work with Oracle. do I need to configure something in order ti change postgres to oracle ??
... View more
07-12-2018
12:16 PM
|
0
|
6
|
1245
|
POST
|
Hello guys, I'm configuring my dataStore 10.5.1 with the ArcGIS Server on Windows Server 2008 R2, when I clicked on finish I got the error above! I read all the documentation about the configuration, the only thing that I didn't get is the highlighted sentence: because during the configuration, I used my "siteadmin" user which is the admin of my arcgis server site, what is a BUILT-IN user ?? EDIT: progress: the built-in user used in siteadmin ( and it's not the source of error) I have found the log file of datastore and it's saying that it can't find POSTGRES !!! ( the logfile is in french) pg_restore: [programme d'archivage (db)] Erreur pendant le traitement de la TOC (« PROCESSING TOC ») : pg_restore: [programme d'archivage (db)] Erreur à partir de l'entrée TOC 2863 ; 0 0 ACL public postgres pg_restore: [programme d'archivage (db)] could not execute query: ERREUR: le rôle « postgres » n'existe pas La commande était : REVOKE ALL ON SCHEMA public FROM PUBLIC; REVOKE ALL ON SCHEMA public FROM postgres; GRANT ALL ON SCHEMA public TO postgres; ... ATTENTION : erreurs ignorées lors de la restauration : 1 but why it is searching for postgres ?? because I wanna work with Oracle as relational database ! Randall Williams Robert Scheitlin, GISP
... View more
07-11-2018
03:37 AM
|
0
|
8
|
1550
|
POST
|
FINALLY I solved that problem, actually when I wasn't able to add the IIS APPPOOL/ArcGISWebAdaptorAppPool v4.0 user to my webAdaptor file, I changed the owner of the file from "administrator" to "system" then simply added the user "everyone" as a user of the file and give it full control over it and that solved my problem, so the instructions are: 1. Install your 1st web adaptor, and you name it 'waportal' > don't register anything in here 2. go to c:/inetpub/wwwroot -> copy 'waportal' and paste on the same place c:/inetpub/wwroot/ by default second wa name is 'waportal copy'. rename it, for example 'waserver' 3. you have to convert 'waserver' as application. go to IIS Manager > in the left side expand Default Website > right click in waserver, choose convert to application 4. chnage the owner of the file webadaptor.config from administrator to "system" and then try to add the user "IIS APPPOOL/ArcGISWebAdaptorAppPool " and give it full control, if that doesn't work, add instead "everyone" user. 5. you have 2 wa right now. the first is waportal and the second is waserver. a. register your portal on your waportal go to http://yourhost/waportal/webadaptor/ > select portal for arcgis then follow the instruction b. register your arcgis server on your waserver go to http://yourhost/waserver/webadaptor/ > select arcgis for server then follow the instruction.
... View more
07-10-2018
05:37 AM
|
0
|
0
|
1042
|
POST
|
I marked your answer as correct because trough your remark I was able to spot the error, I didn't configure my arcGIS Server with the Web Adaptor and I stilled federeated it with Portal wich was WRONG also I didn't enable https on port 443 on web server which was also WRONG after correcting these stuff I was able to federate the server with Portal in the right way and then everything worked fine thank you mister Jonathan
... View more
07-10-2018
05:19 AM
|
0
|
0
|
495
|
Title | Kudos | Posted |
---|---|---|
1 | 07-13-2018 12:59 PM | |
1 | 05-19-2017 08:31 AM | |
2 | 05-23-2017 08:42 AM | |
2 | 05-23-2017 07:07 AM | |
1 | 05-19-2017 12:54 PM |
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:25 AM
|