Latest Contributions by JerryGarcia

‎12-05-2023

I agree, my database is getting messy and confusing because I can't house it all under one feature dataset.

‎03-02-2022

Hi Jorge Both File and Personal GDBs are supported in the Data Loader tool. Please check that the "Show of type" option is using "File Geodatabases" rather than "Personal Geodatabases". Hopeful that's the issue. Regards, Bo

‎06-02-2021

I'm facing this same issue... I know this post is almost exactly 2 years old, but what did you have to change to go through the portal web adaptor?

‎05-04-2020

Thank you! I was able to balance territories once I added level variables with statistics set to "sum". Best!

‎09-19-2019

I changed the max record count when an appending tool failed to add records to a hosted feature class. In the dashboard, the "data limit exceeded" yellow warning cone had appeared but dropped after I switch the maxRecordCount. Note that the article explicitly mentions: " A feature service's maximum number of records in the REST endpoint can be changed by increasing the maxRecordCount value. Note: The number of features displayed in a web map is no longer determined by the maxRecordCount. This article describes how to increase maxRecordCount for querying from REST or for creating a local copy of a service in ArcMap. "

‎04-24-2019

The main purpose is to host the results from ArcGIS Enterprise raster analytics. I believe this help topic explain a lot about this https://enterprise.arcgis.com/en/portal/latest/administer/windows/configure-and-deploy-arcgis-enterprise-for-raster-analytics.htm

‎06-29-2020

It is typically not recommended to manually edit the geodatabase items through the backend because it can lead to unexpected behaviors. In this circumstance restoring a database backup is likely the safest solution. If you restore the database to the condition prior to unregistering as versioned, do you see the Definition field populated? It may be a good idea to do a clean export and re-import of the data from that backup. When you export the feature class to a file geodatabase and re-import it, it will not be registered as versioned. However, it would be worth going through the workflow of registering and unregistering as versioned to see if the issue persists.

‎05-14-2018

It appears I keep losing my database connection? I am looping. The first 6 or 20 or so operations execute fine, but then it appears I loose the database connection? There is a pause, then a rapid fire of errors. Once it loses a connection, it does not recover. Any suggestions? Thanks! testSQLCreatorConnection = r"D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde" inAllDEMMosaicDataset = r"\GIS.DATACREATOR.all_dem" inAllDEMMosaicDatasetFullPath = testSQLCreatorConnection + inAllDEMMosaicDataset result = arcpy.GetCellValue_management(in_raster=inAllDEMMosaicDatasetFullPath, location_point=str(point['x'])+ " " + str(point['y']), band_index="") EXAMPLE LOG File: INFO:root:QADEMData: START INFO:root:2018-05-14 11:39:04.494000 Status: 0, cellSize: 0, cellValue: 69.924477 INFO:root:2018-05-14 11:39:09.009000 Status: 0, cellSize: 0, cellValue: 69.924477 INFO:root:2018-05-14 11:39:14.822000 Status: 0, cellSize: 0, cellValue: 439.92664 INFO:root:2018-05-14 11:39:20.462000 Status: 0, cellSize: 0, cellValue: 406.72403 INFO:root:2018-05-14 11:39:26.071000 Status: 0, cellSize: 0, cellValue: 601.04382 INFO:root:2018-05-14 11:39:31.618000 Status: 0, cellSize: 0, cellValue: 601.04382 INFO:root:2018-05-14 11:39:37.180000 Status: 0, cellSize: 0, cellValue: 398.90991 INFO:root:2018-05-14 11:39:42.743000 Status: 0, cellSize: 0, cellValue: 398.90991 INFO:root:2018-05-14 11:39:48.399000 Status: 0, cellSize: 0, cellValue: 398.90991 INFO:root:2018-05-14 11:39:54.055000 Status: 1, cellSize: 0, cellValue: NoData INFO:root:2018-05-14 11:39:59.399000 Status: 1, cellSize: 0, cellValue: NoData INFO:root:2018-05-14 11:40:05.305000 Status: 1, cellSize: 0, cellValue: NoData ERROR:root: File "D:\QAData\QAData.py", line 112, in QADEMData result = arcpy.GetCellValue_management(in_raster=inAllDEMMosaicDatasetFullPath, location_point=str(point['x'])+ " " + str(point['y']), band_index="") Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue). Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue). ERROR:root: File "D:\QAData\QAData.py", line 112, in QADEMData result = arcpy.GetCellValue_management(in_raster=inAllDEMMosaicDatasetFullPath, location_point=str(point['x'])+ " " + str(point['y']), band_index="") Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue). Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue). ERROR:root: File "D:\QAData\QAData.py", line 112, in QADEMData result = arcpy.GetCellValue_management(in_raster=inAllDEMMosaicDatasetFullPath, location_point=str(point['x'])+ " " + str(point['y']), band_index="") Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue). Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue). ERROR:root: File "D:\QAData\QAData.py", line 112, in QADEMData result = arcpy.GetCellValue_management(in_raster=inAllDEMMosaicDatasetFullPath, location_point=str(point['x'])+ " " + str(point['y']), band_index="") Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue). Failed to execute. Parameters are not valid. ERROR 000732: Input Raster: Dataset D:\PWDs\SDE_Connection_Files\agren-gis-test-DataCreator.sde\GIS.DATACREATOR.all_dem does not exist or is not supported Failed to execute (GetCellValue).

‎12-19-2017

Thanks for responding. That would be nice if the error message made logical sense. For me, I get this error for various reasons. In this case, I has the "sampling type" set wrong to too many samples. Apparently, ArcMap could not handle it and gave the 000210 error. Not very helpful error messaging. Thanks!

‎12-19-2017

Thanks. I still need to get raster info using a spatial query. If I use ArcMap Identify tool on a mosaic dataset I can get multiple rasters returned that are stacked on top; each raster, I can tell via function chain, what the source image is. How do I do this via ArcPy?

‎06-18-2019

We run completely on ArcGIS Online, web hooks though integromat work directly with AGOL (Survey123) and Tracker is supposed to be compatible with AGOL, in the near future.

‎03-13-2018

update https://community.esri.com/blogs/dan_patterson/2018/03/11/concave-hulls-the-elusive-container

‎04-05-2017

I see nothing in arcpy other than the ability to acquire properties through the Describe object then produce new raster objects through conventional spatial analyst tools

‎08-24-2017

This works as long as the dojo.on module is called first, like so: require(["dojo/on"], function(on) { on.once(map, "update-end", function(){ // will only fire once... }); }); Thanks for this great tip!

‎01-31-2017

Some additional random info... Years ago, combining features into less features would help with performance. Maybe not so much these days... not sure. I'm just trying a couple things. Contours are for display only. These are two foot for the whole US. For the most part, being processed per county and stored in a FGDB per county. Served as one contour map service. The MXD has a lot of feature classes; one per county. This may present a problem at some point...?...? I have one county whereby the clip keeps crashing. I'm trying to clip off contours outside the county boundary whereby the DEMs overlapped across county lines somewhat. I thought maybe combining the features would also help with the clip operation. Cheers, Jerry

Online Status	Offline
Date Last Visited	‎11-11-2020 02:23 AM

My Ideas

Latest Contributions by JerryGarcia

Re: Tables in Feature Datasets

Re: Where can i find documentation for Topographic Data Store (TDS) schema?

Re: code 100005: methodName='ImageServer.GetFields' error?

Re: Why can't I set Territory balance variables with ArcGIS Pro BA?

Re: How to increase feature limit in ArcGIS Online?

Re: Difference between Hosted Imagery Layers and Mosaic Image Services?

Re: Unregistering as versioned corrupted Feature Class. help.

ArcPy looses database connection?

Re: Error running LAS Dataset to Raster? Help Please.

Re: Get raster source units from Mosaic Dataset?

Re: Publishing Custom Widget in ArcGIS Online

Re: MultiPoint features to Polygon features help?

Re: Apply function chain to individual rasters based on units?

Re: Can you use dojo on.once() with map::update-end event?

Re: combine features into one feature

Re: Publishing Custom Widget in ArcGIS Online

code 100005: methodName='ImageServer.GetFields' er...

Re: Consume ArcGIS services in Mapbox GL API?

Re: Cannot configure HTTPS

Re: Error running LAS Dataset to Raster? Help Ple...