topic Re: Error in DEM Reconditioning in Arc hydro 10 in Water Resources Questions

Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Thu, 04 Oct 2012 18:53:37 GMT

Original User: souris_boo

Hi!
I just installed Arc Hydro for ArcGis 10 and i receive this error in processing DEM Reconditioning

"Error HRESULT E_FAIL has been returned from a call to a COM component"

Help please

Natalie

Re: Error in DEM Reconditioning in Arc hydro 10

MarkBoucher — Fri, 05 Oct 2012 14:37:20 GMT

Natalie,

This is a common error message. It could be there is file conflict in your temp directory. By clearing the temp directory, you eliminate potential file conflicts. Go here (http://forums.arcgis.com/threads/48100-ArcHydro-Problem-Solvers) to find several solutions including deleting the temp directory files. See the second suggestion under number 2 of the first post for the simplest way of doing this.

Report back if that works!

Mark

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Wed, 10 Oct 2012 20:59:44 GMT

Original User: kimcarlson

I am experiencing the same error when reconditioning a DEM ("burning" in field collected river vector data) using Arc Hydro tools.

Error 010024: Error during conversion

I'm running ArcGIS 10.1 in Windows 7 using Bootcamp. All files are saved on the windows side of the partition.

I've tried [as suggested aon this forum] deleting files in my temp directory, changing the processing extent, and setting the raster export pointer to a directory and the shapefile pointer to a geodatabase. The river vector data are saved in a geodatabase, and all my projections are WGS 1984 Mercator. I've played around with different projections and tried clipping the DEM in case it was a memory issue...all to no avail.

I am a long-time Arc user but have never used 10.1, bootcamp, nor Arc Hydro. Perhaps a bad combo.

Any suggestions would be very welcome! If Arc Hydro won't work for me, do you have any suggestions for other ways to burn our river field data into the DEM?

Attached is a record of this error.

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Thu, 11 Oct 2012 18:29:01 GMT

Original User: souris_boo

Hi |

is that someone has an answer to this question ? I did all approach suggested above and I still get the same error

thanks

Natalie

Re: Error in DEM Reconditioning in Arc hydro 10

MarkBoucher — Thu, 11 Oct 2012 19:53:42 GMT

Natalie,

If you share your data, I could try to run the process on it.

Mark

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Fri, 12 Oct 2012 19:27:49 GMT

Original User: souris_boo

Bien sure.....and how am I doing?

Thanks.

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Mon, 15 Oct 2012 16:38:38 GMT

Original User: souris_boo

Hi

I contacted support Arc hydro and my problem was that I did not have the OBJECTID field in my feature class.
I added it and now everything works fine. They will correct the problem.

Natalie

Re: Error in DEM Reconditioning in Arc hydro 10

MarkBoucher — Tue, 16 Oct 2012 14:15:17 GMT

I did not have the OBJECTID field in my feature class.

Interesting. Which feature class was missing the OBJECTID? Agreestream?

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Tue, 16 Oct 2012 18:49:56 GMT

Original User: souris_boo

It is imperative that the data is in a geodatabase

the feature class was a river shapefile.

not more complicated than that

Natalie

Re: Error in DEM Reconditioning in Arc hydro 10

D_D_ — Tue, 23 Oct 2012 08:03:13 GMT

MBoucher21, I have the same error that kimcarlson posted... What might be the case? Using just tutorial data for ArcHydro 2.
ArcGIS 10.1, latest ArcHydro for 10.1 from the ftp

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Tue, 23 Oct 2012 16:58:48 GMT

Original User: MBoucher21

MBoucher21, I have the same error that kimcarlson posted... What might be the case? Using just tutorial data for ArcHydro 2.
ArcGIS 10.1, latest ArcHydro for 10.1 from the ftp

I'm not sure what is going wrong with kimcarlson's project. I searched the error kimcarlson posted and found this in Desktop Help:
http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#//00vq00000002010024.htm

The DEMs I use are floating point and I've move the polyline layer I used for agreestream for burning the streams into a geodatabase. I don't get this error.

Re: Error in DEM Reconditioning in Arc hydro 10

D_D_ — Sun, 12 Dec 2021 07:07:40 GMT

so, I watched ArcCatalog results and it is 2 types of errors based on the input data that I used:
1) When I put river.shp from the .gdb it gives me this error:

Messages
Executing: DEMReconditioning "C:\Users\<msg>0;Start Time: Wed Oct 24 12:39:00 2012
Making buffer constant grid ..
Making smooth constant grid ..
Making sharp constant grid ..
ERROR 010024: Error during conversion.
Failed to execute (DEMReconditioning).
Failed at Wed Oct 24 12:39:01 2012 (Elapsed Time: 1,00 seconds)
Failed at Wed Oct 24 12:39:01 2012 (Elapsed Time: 1,00 seconds)

2) When I put river.shp from the folder I get this:

Executing: DEMReconditioning "C:\Users\<msg>0;Start Time: Wed Oct 24 14:36:19 2012
<msg>2;Failed to execute (DEMReconditioning).
Failed at Wed Oct 24 14:36:19 2012 (Elapsed Time: 0,00 seconds)
Failed to execute (DEMReconditioning).
Failed at Wed Oct 24 14:36:19 2012 (Elapsed Time: 0,00 seconds)

Наve been trying different output locations and file extensions, but it doen`t help.
win7 x64

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Thu, 25 Oct 2012 12:06:19 GMT

Original User: Yury_Korobochkin

Hi!
I have just installed ArcGis 10.1
and installed Arc Hydro for ArcGis 10.1
Every time I try to run DEM Manipulation || DEM Reconditioning I get " ERROR 010024 :error during conversion".
In spite of everything was done in accordance with Tutorials, I get this error message.
Maybe anybody could help me...
I would be very greatful.

Yury

Re: Error in DEM Reconditioning in Arc hydro 10

D_D_ — Sun, 12 Dec 2021 07:07:44 GMT

After I updated Arcgis Desktop 10.1 to SP1 I get new type of error in DEM reconditioning Tool:

Messages
Executing: DEMReconditioning elev_cm.tif NHDFlowline 5 10 1000 C:\Users\<msg>0;Start Time: Wed Oct 31 17:45:10 2012
ERROR 000816: The tool is not valid.
Failed to execute (DEMReconditioning).
Failed at Wed Oct 31 17:45:10 2012 (Elapsed Time: 0,00 seconds)
Failed at Wed Oct 31 17:45:10 2012 (Elapsed Time: 0,00 seconds)

000816 : The tool is not valid

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Wed, 31 Oct 2012 16:16:18 GMT

Original User: MBoucher21

I see you are using a tif. I've never started with a tif, so I don't know if using a tif works with the Arc Hydro tools. Converting the tif to an official raster may solve the problem. However, I converted my raster to a tif and the tif worked with DEM Reconditioning. I'm no expert on raster/tif issues with Spatial Analyst, but maybe the error lies in that.

Re: Error in DEM Reconditioning in Arc hydro 10

D_D_ — Wed, 31 Oct 2012 16:33:55 GMT

It`s a .tif from the Tutorial Data for ArcHydro 2.0 (ftp://RiverHydraulics@ftp.esri.com/ArcHydro/Data/Tutorial/2.0/) and it`s a step of Arc Hydro Tools 2.0 - Tutorial.pdf (ftp://RiverHydraulics@ftp.esri.com/ArcHydro/Doc/ArcHydro2_0/). In this tutorial the data is in the AIG format, but it doesn`t matter in my case. If it seems not to work with the tutorial data I definitely wouldn`t expect this program to work with the real data...
Spatial Analyst works perfectly!

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Thu, 01 Nov 2012 01:37:05 GMT

Original User: chukitskoye

Oh dear. I'm going to have add my woes to the list of those plagued by "Error during conversion" while trying to recondition a DEM in ArcHydro. synaps, have you found anything new to report?

I'm running the latest version of ArcHydro on ArcGIS 10.1, at ArcInfo level (afaik it's ArcInfo--I'm using the "Desktop Advanced Student Edition," as I am a student). I am running Windows 7 Professional SP1 64-bit.

I've followed all of the steps outlined in the Geoprocessing Tutorial pdf (on the FTP site), and listed in other posts. I'm putting my rasters and vectors in their proper places. My river is in a feature class inside a feature dataset in a .gdb; folder names and indeed the whole path has no spaces, etc...whole new projects; clearing my temp folder every time I try to run the tool; saving my mxd; and, as mentioned, all the steps listed in the error-solving post on this forum.

Still, this error pops up each time, much like synaps' original error:

Making sharp constant grid ..
ERROR 010024: Error during conversion.
Failed to execute (DEMReconditioning).
Failed at Wed Oct 31 22:25:09 2012 (Elapsed Time: 3.00 seconds)

Every time at the "making sharp constant grid" step, the tool fails. Argh! I've tried using a .tif and a regular GRID as the raw DEM input, but no dice either way. Does the bit depth/pixel type matter? What else can I try to do?

All insight is appreciated. Thank you!

Re: Error in DEM Reconditioning in Arc hydro 10

MarkBoucher — Thu, 01 Nov 2012 15:30:34 GMT

Sound's like its time for ESRI to speak to this error.

Re: Error in DEM Reconditioning in Arc hydro 10

Anonymous User — Fri, 02 Nov 2012 15:49:55 GMT

Original User: synaps

chukitskoye, nope... nothing new to inform.
MBoucher21, how we can invite them to this thread?

Re: Error in DEM Reconditioning in Arc hydro 10

MarkBoucher — Mon, 05 Nov 2012 14:47:03 GMT

how we can invite them to this thread?

I sent a msg to an ESRI Senior Member asking them if they could direct an ESRI person to this link. Let's see what happens.