topic Re: error in river connectivity in HEC Heo HMS in Water Resources Questions

error in river connectivity in HEC Heo HMS

AjayMore — Sat, 14 Sep 2013 20:50:01 GMT

Hello All,

I am getting error when I check data with HEC Geo HMS for modeling into HEC HMS.
The error log file shows the following error:
Checking project points [VIP points]...
Checking VIP Point: Outlet1 x=784893.2932, y=4502612.2667
End of checking point: name=Outlet1 oid=1 - PROBLEM: outlet point does not have right river connectivity.
End of checking project points [VIP points].

If I avoid this error and keep working forward HEC HMS doesn't show any schematic of the model.

I hope some one will reply soon.

Thanks very much.

Sincerely

Ajay

Re: error in river connectivity in HEC Heo HMS

ZichuanYe — Mon, 16 Sep 2013 21:18:07 GMT

Check to see if the outlet (in this case, outlet1) is overlaying with any river. Each outlet needs to overlay (intersect) with a river line - at the to_point of the river.

Zichuan Ye

Re: error in river connectivity in HEC Heo HMS

ketakiagarwal — Tue, 17 Sep 2013 08:29:33 GMT

Edit the project point by using move option and move the outlet point to the intersection point of rivers. This will solve the issue.

Re: error in river connectivity in HEC Heo HMS

AjayMore — Thu, 20 Mar 2014 18:32:12 GMT

Any other suggestions?? Outlet point for my project is lying exactly on top of river.

Thanks

Ajay

Re: error in river connectivity in HEC Heo HMS

ketakiagarwal — Fri, 21 Mar 2014 03:37:47 GMT

Any other suggestions?? Outlet point for my project is lying exactly on top of river.

Thanks

Ajay

kindly share the screen shot of your project area. with the outlet area in focus.

Re: error in river connectivity in HEC Heo HMS

ElinaShah — Thu, 24 Mar 2016 18:51:43 GMT

I have re-checked my model multiple times, but am unable to export the basin model file. While checking HEC-HMS data, I get the following error:

End of checking point: name=Outlet1 oid=1 - PROBLEM: outlet point does not have right river connectivity.

This is the only error I have in the model. I checked the outlet and found that it was exactly on the stream. I do not know how to move the outlet and am unable to find a solution for the error.

While exporting the basin model file I receive the RESULT_FAIL from a call to a COM component.

Please help me!

Re: error in river connectivity in HEC Heo HMS

JeffWalker — Thu, 03 Nov 2016 03:03:36 GMT

I had the same problem. Use the edit tools to move you outlet and snap it to the very edge of the sub-basin where the river feature intersects the sub-basin layer. Errors related to the outlet point should then be cleared.