topic extract by mask in model builder - output "Damaged, Corrupted, or is too large" in ModelBuilder Questions

extract by mask in model builder - output "Damaged, Corrupted, or is too large"

jamiefinney — Thu, 07 May 2015 09:06:55 GMT

Strange one i have a model which should;

- Take an input tif image

- Clip it using a shp file as a new tif

- Uses an iterator to batch a folder of tif images

The input files open fine in other programs (ie. windows picture viewer / paint)

however the output files come up with the error shown in "Tif_Error" attachment if opened using windows picture viewer

The images open fine if opened with ArcMap or Global Mapper

Looking at the image properties for input / output the only real differences are;

Input Output

Pixel Depth: 8 Bit Pixel Depth: 16 Bit

No Data Value: 256 No Data Value: 65535

I've attached an image of the model also

ArcView 10 (SP5) + Spatial Analysis

Re: extract by mask in model builder - output "Damaged, Corrupted, or is too large"

DanPatterson_Retired — Thu, 07 May 2015 09:17:29 GMT

maybe the too large error or it can't be read by the windows previewer. If it works fine in ArcMap then that may be the problem

Re: extract by mask in model builder - output "Damaged, Corrupted, or is too large"

jamiefinney — Thu, 07 May 2015 10:55:25 GMT

The output clipped images are only 8.5mb (the input files are 1.5mb) so i

can't imagine size is an issue.

if opened with;

Windows picture viewer - ...Damaged, corrupted or too large error

Picasa Picture Viewer - Invalid Image

GIMP - Comes up with an error saying it can only handle an 8 bit image.

so this seems to be the problem.

how can i make the model export an 8 bit image? (the same as the input)

Re: extract by mask in model builder - output "Damaged, Corrupted, or is too large"

JayantaPoddar — Thu, 07 May 2015 11:07:09 GMT

Hi Jamie,

Try the following steps:

In Model Builder > Model > Model Properties > Environments

Change the NoData Value as Maximum. Is it helping?

Re: extract by mask in model builder - output "Damaged, Corrupted, or is too large"

jamiefinney — Thu, 07 May 2015 11:36:19 GMT

Jayanta Poddar

Thanks for the suggestion i think this might be in a newer version of arcmap than i'm using i can only see the following options. (ArcView v10 SP5)

I also tried adding an additional tool on the end of my model (Copy Raster) with it set to 8 bit unsigned but these files just exported as tiny corrupt files.

Re: extract by mask in model builder - output "Damaged, Corrupted, or is too large"

curtvprice — Thu, 07 May 2015 12:37:05 GMT

Could the setting for TIFF tiling be the issue?

37907 - Create TIFF files that can be read by other software programs

Re: extract by mask in model builder - output "Damaged, Corrupted, or is too large"

jamiefinney — Thu, 07 May 2015 13:32:50 GMT

Curtis Price

Good suggestion Curtis unfortunately it didn't work. The files still didn't open in picture viewer and the image was left mostly blank.