topic How do I set symbol level using model builder? in ModelBuilder Questions

How do I set symbol level using model builder?

erinheinrich — Thu, 25 Feb 2016 00:41:33 GMT

Hi all,

I'm using the "Apply Symbology From Layer" tool in modelbuilder - see screenshot of end of model.

The details for the YEAROFFIRE.lyr are as below. Note, in the Advanced tab, I have ticked that the layers should be draw in a specific order.

However the output layer from the model does not have this box ticked...

Any thoughts as to how to force this?

Thank you for your help!
Erin

DanPatterson_Retired — Thu, 25 Feb 2016 04:31:10 GMT

the options for enforcing no change are given in the help topic midway down

and they relate to each type of classification, in your case, you need to change it to a manual classification

erinheinrich — Thu, 25 Feb 2016 04:57:26 GMT

Hi Dan,

Thanks for your response.

As far as I can tell, I already have manual classification...

Any other thoughts?

erinheinrich — Wed, 15 Jun 2016 00:38:31 GMT

Hi all,

After investigation by ESRI Australia Support, this is now a known bug.

What that space!