topic Re: Adding a new code to DEVICE_STATUS domain for Partially open valves in ArcGIS Utility Network Questions

Adding a new code to DEVICE_STATUS domain for Partially open valves

VishApte — Wed, 24 Feb 2021 22:16:42 GMT

Hi,

I am in a process of building a UN model for Water Distribution. It is set-up correctly mostly similar to Naperville model and can see subnetworks and run traces etc.

Now I need to add an additional code to VALVE_STATUS domain called "Partial" to represent that a valve is partially open. I stopped UN services and disabled UN topology. I then added a code 4 with description of "Partial" to appropriate domains i.e. Valve_Status and Device_Status_Combined.

I then reenabled the topology. When I change one of the valves from "Open"
to "Partial", it becomes a barrier and the network downstream is left out of the subnetwork after Validate and Update subnetwork. The tier is defined only with Present_Status=0 (closed) as a barrier. So Present_Status of 4 (Partial) should not become a barrier.

Am I missing something?

Cheers,

Vish

Re: Adding a new code to DEVICE_STATUS domain for Partially open valves

MikeMillerGIS — Thu, 25 Feb 2021 14:25:32 GMT

Does not make sense. Could you package a up a small repo case and we can look at it?

Re: Adding a new code to DEVICE_STATUS domain for Partially open valves

VishApte — Fri, 26 Feb 2021 11:19:55 GMT

@MikeMillerGIS

I tried the same in Naperville V4 model and I could not reproduce. The only difference I found is Naperville v4 model schema v2.6 does not have "Device Status Combined" domain and does not have "Device Status" domain, only "Valve Status" domain.

Also, I found network attribute definition is different. Naperville model has as below.

My model also V4 and created using Pro 2.6.0 has

Will it making the difference?

Cheers,

Vish

Re: Adding a new code to DEVICE_STATUS domain for Partially open valves

VishApte — Fri, 26 Feb 2021 11:43:53 GMT

Trying to fix my model so that inline field bit size updates to 3 to cater for additional value of 4 in the Device Status Combined domain. But I cannot find a tool to remove network attribute or disassociate network attribute so that I can add it again. Adding the same attribute errors out.

ERROR 001952: Network attribute with the specified name already exists.
Failed to execute (AddNetworkAttribute).

Parameters were:

Input Utility Network UNWater Utility Network
Attribute Name P:Device Status
Attribute Type SHORT
In Line INLINE
Apportionable NOT_APPORTIONABLE
Domain Name 6_Pipeline_Device_Status_Combined
Is Overridable NOT_OVERRIDABLE
Nullable NOT_NULLABLE
Substitution NOT_SUBSTITUTION
Network Attribute to Substitute
Updated Utility Network UNWater Utility Network

Looks like I will have to export asset package, fix network attribute and reapply 😞

Re: Adding a new code to DEVICE_STATUS domain for Partially open valves

VishApte — Mon, 01 Mar 2021 00:41:28 GMT

Export Asset Package with data and Reapply Asset Package worked.

Device Status is updated with in-line network attribute of 3 bits. Traces work correctly.

It will be nice if Pro UN toolset adds a tool to remove network attribute or reset network attribute and to remove network attribute assignment.