topic Re: Communication Model V1 - Subnetwork Configuration Is Missing in ArcGIS Utility Network Questions

Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Fri, 20 Nov 2020 08:22:21 GMT

Hello,

I am trying to set up "CommunicationsDataManagementForArcGISEnterpriseV1" but get attached error during application of asset package.

Is this problem known and is there a solution/fix to it?

Thanks and best regards,
Jürgen

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JohnAlsup — Fri, 20 Nov 2020 17:40:35 GMT

Hi Jurgen

Was this asset package modified in any way after being downloaded?

Re: Communication Model V1 - Subnetwork Configuration Is Missing

Anonymous User — Sat, 21 Nov 2020 13:25:10 GMT

Could you post the message section of the GP tool? This will provide us the version of ArcGIS Pro and the version of the untools.

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Mon, 23 Nov 2020 07:41:10 GMT

Hi John

No, I didn't modify the asset package at all. Even the entire environment was set up completely anew with PostgreSQL 11 as enterprise database.

Regards,
Jürgen

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Mon, 23 Nov 2020 07:42:53 GMT

Hi Michael,

This is what the messages section reports:

Start Time: Monday, November 23, 2020 7:36:51 AM

ArcGIS Pro 2.6.3.24783

untools 2.6.0

Executing from ArcGIS Pro, 0 map(s), activeMap = False

Parallel processing enabled: 3

Asset Package schema version: 2.6

The asset package has the following errors (4/4):
                             Item Field   OID                                            Value                                         Message  Level
0  B_Subnetwork_ConditionBarriers  None  None  Switch: B_Subnetwork_Devices|B_Subnetwork_Lines  A required subnetwork configuration is missing  error
1  B_Subnetwork_ConditionBarriers  None  None    Coax: B_Subnetwork_Devices|B_Subnetwork_Lines  A required subnetwork configuration is missing  error
2  B_Subnetwork_ConditionBarriers  None  None  Copper: B_Subnetwork_Devices|B_Subnetwork_Lines  A required subnetwork configuration is missing  error
3  B_Subnetwork_ConditionBarriers  None  None   Fiber: B_Subnetwork_Devices|B_Subnetwork_Lines  A required subnetwork configuration is missing  error

Failed to execute (AssetPackageToUtilityNetwork).

Failed at Monday, November 23, 2020 7:37:14 AM (Elapsed Time: 22.33 seconds)

Regards,

Jürgen

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Thu, 26 Nov 2020 07:07:58 GMT

Hi Michael,

Did you have the time and opportunity to look into this?

Meanwhile, I made another test with a new download of the Communication Data Management model, the result was the same.

Thank you very much, best regards,
Jürgen

Re: Communication Model V1 - Subnetwork Configuration Is Missing

PaulLeBlanc1 — Wed, 02 Dec 2020 02:55:45 GMT

I believe you need to update your version of untools

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Wed, 02 Dec 2020 09:49:18 GMT

Hi Paul

I have untools 2.6.0 installed. I think there is no newer version of the untools.

Regards, Jürgen

Re: Communication Model V1 - Subnetwork Configuration Is Missing

PaulLeBlanc1 — Wed, 02 Dec 2020 23:34:01 GMT

https://solutions.arcgis.com/utilities/help/utility-network-automation/get-started/release-notes-2-6-0.htm

You should see an update in the packages list. Might need to refresh

Re: Communication Model V1 - Subnetwork Configuration Is Missing

Anonymous User — Thu, 03 Dec 2020 00:27:54 GMT

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Thu, 03 Dec 2020 12:14:53 GMT

The Update Packages list only shows untools 2.6.0, even after refreshing. It is the same version of the untools that is already installed in my environment. Nevertheless, I hit the "Update All" button, but the result was the same. Which version of untools are we looking for?

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Thu, 03 Dec 2020 12:24:14 GMT

Hi Matt (hope that's correct)

Thanks for sharing your observations. Since it is not only me that is facing this problem I assume that the problem is related to either the asset package or to the tools that are delivered by Esri. Instead of manipulating the asset package on my own (as you suggest) I would expect Esri to investigate the root cause and come up with an official solution or fix.

Anyone from the Esri solutions team: Please let me know what to expect and how to continue. Thank you.

Best regards,
Jürgen

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Mon, 07 Dec 2020 14:18:28 GMT

Hi Paul

So it is untools 2.6.2 we are looking for. Any idea how I can install it? As mentioned below, my ArcGIS Pro doesn't offer it for installation.

Regards,
Jürgen

Re: Communication Model V1 - Subnetwork Configuration Is Missing

PaulLeBlanc1 — Tue, 08 Dec 2020 15:02:07 GMT

Can you try the steps from https://solutions.arcgis.com/utilities/help/utility-network-automation/get-started/frequently-asked-questions.htm#anchor2 ? I'm not sure why the refresh isn't showing it to you.

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Wed, 09 Dec 2020 08:04:22 GMT

Unfortunately, that does not resolve the problem:

(arcgispro-py3-clone1) C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone1>conda install -c esri untools --insecure
Fetching package metadata .............
Solving package specifications: .
Warning: 2 possible package resolutions (only showing differing packages):
- defaults::parso-0.8.0-py_0, esri::jedi-0.16.0-py36_0
- defaults::parso-0.7.0-py_0, esri::jedi-0.17.2-py36_0

Package plan for installation in environment C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone1:

The following packages will be UPDATED:

arcgis: 1.8.3-py36_1665 esri --> 1.8.3-py36_1668 esri
pandas: 1.0.5-py36h47e9c7a_0 --> 1.1.3-py36ha925a31_0
untools: 2.6.0-py36_1 esri --> 2.6.2-py36_0 esri

Proceed ([y]/n)? y

Disabling notebook extension arcgis/extension...
- Validating: ok
Uninstalling arcgis arcgis/extension
Removing: C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone1\share\jupyter\nbextensions\arcgis

ERROR conda.core.link:_execute_actions(337): An error occurred while installing package 'defaults::pandas-1.1.3-py36ha925a31_0'.
CondaError: Cannot link a source that does not exist. C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs\pandas-1.1.3-py36ha925a31_0\Lib\site-packages\pandas-1.1.3.dist-info\INSTALLER
Attempting to roll back.

CondaError: Cannot link a source that does not exist. C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs\pandas-1.1.3-py36ha925a31_0\Lib\site-packages\pandas-1.1.3.dist-info\INSTALLER

(arcgispro-py3-clone1) C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone1>

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Wed, 09 Dec 2020 10:26:35 GMT

Hi Paul,

This log-file documents my unsuccessful attempt to upgrade the untools via Python Prompt. Does that give any clue?

Regards,
Jürgen

(arcgispro-py3-clone) C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone>conda install -c esri untools --insecure --no-pin -v
Fetching package metadata .............
Solving package specifications: .

Package plan for installation in environment C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone:

The following packages will be UPDATED:

pandas: 1.0.5-py36h47e9c7a_0 --> 1.1.3-py36ha925a31_0
untools: 2.6.0-py36_1 esri --> 2.6.2-py36_0 esri

Proceed ([y]/n)? y

===> UNLINKING PACKAGE: defaults::pandas-1.0.5-py36h47e9c7a_0 <===
prefix=C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone

===> UNLINKING PACKAGE: esri::untools-2.6.0-py36_1 <===
prefix=C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone

===> LINKING PACKAGE: defaults::pandas-1.1.3-py36ha925a31_0 <===
prefix=C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone
source=C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs\pandas-1.1.3-py36ha925a31_0

An error occurred while installing package 'defaults::pandas-1.1.3-py36ha925a31_0'.
CondaError: Cannot link a source that does not exist. C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs\pandas-1.1.3-py36ha925a31_0\Lib\site-packages\pandas-1.1.3.dist-info\INSTALLER
Attempting to roll back.

===> REVERSING PACKAGE LINK: defaults::pandas-1.1.3-py36ha925a31_0 <===
prefix=C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone

===> REVERSING PACKAGE UNLINK: esri::untools-2.6.0-py36_1 <===
prefix=C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone

===> REVERSING PACKAGE UNLINK: defaults::pandas-1.0.5-py36h47e9c7a_0 <===
prefix=C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone

An unexpected error has occurred.
Please consider posting the following information to the
conda GitHub issue tracker at:

https://github.com/conda/conda/issues

Current conda install:

platform : win-64
conda version : 4.3.27
conda is private : False
conda-env version : 4.3.27
conda-build version : 3.18.9
python version : 3.6.8.final.0
requests version : 2.22.0
root environment : C:\Program Files\ArcGIS\Pro\bin\Python (writable)
default environment : C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone
envs directories : C:\Program Files\ArcGIS\Pro\bin\Python\envs
C:\Users\j.biendara\AppData\Local\ESRI\conda\envs
C:\Users\j.biendara\.conda\envs
package cache : C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs
C:\Program Files\ArcGIS\Pro\bin\Python\pkgs
channel URLs : https://conda.anaconda.org/esri/win-64
https://conda.anaconda.org/esri/noarch
https://repo.anaconda.com/pkgs/main/win-64
https://repo.anaconda.com/pkgs/main/noarch
https://repo.anaconda.com/pkgs/free/win-64
https://repo.anaconda.com/pkgs/free/noarch
https://repo.anaconda.com/pkgs/r/win-64
https://repo.anaconda.com/pkgs/r/noarch
https://repo.anaconda.com/pkgs/msys2/win-64
https://repo.anaconda.com/pkgs/msys2/noarch
config file : C:\Program Files\ArcGIS\Pro\bin\Python\.condarc
netrc file : None
offline mode : False
user-agent : conda/4.3.27 requests/2.22.0 CPython/3.6.8 Windows/10 Windows/10.0.17763
administrator : True

`$ C:\Program Files\ArcGIS\Pro\bin\Python\Scripts\conda install -c esri untools --insecure --no-pin -v`

Traceback (most recent call last):
File "conda\core\link.py", line 326, in _execute_actions
File "conda\core\path_actions.py", line 230, in execute
File "conda\gateways\disk\create.py", line 246, in create_link
conda.CondaError: Cannot link a source that does not exist. C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs\pandas-1.1.3-py36ha925a31_0\Lib\site-packages\pandas-1.1.3.dist-info\INSTALLER

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "conda\core\link.py", line 281, in execute
File "conda\core\link.py", line 344, in _execute_actions
conda.CondaMultiError: Cannot link a source that does not exist. C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs\pandas-1.1.3-py36ha925a31_0\Lib\site-packages\pandas-1.1.3.dist-info\INSTALLER

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
File "conda\exceptions.py", line 641, in conda_exception_handler
File "conda\cli\main.py", line 144, in _main
File "conda\cli\main_install.py", line 80, in execute
File "conda\cli\install.py", line 329, in install
File "conda\plan.py", line 830, in execute_actions
File "conda\instructions.py", line 247, in execute_instructions
File "conda\instructions.py", line 108, in UNLINKLINKTRANSACTION_CMD
File "conda\core\link.py", line 297, in execute
conda.CondaMultiError: Cannot link a source that does not exist. C:\Users\j.biendara\AppData\Local\ESRI\conda\pkgs\pandas-1.1.3-py36ha925a31_0\Lib\site-packages\pandas-1.1.3.dist-info\INSTALLER

(arcgispro-py3-clone) C:\Users\j.biendara\AppData\Local\ESRI\conda\envs\arcgispro-py3-clone>

Re: Communication Model V1 - Subnetwork Configuration Is Missing

JürgenBiendara — Wed, 16 Dec 2020 07:43:53 GMT

Hi Paul,

With the help from Esri support (see case #02696389) we figured out that the problem was caused by a corrupted installation of the "pandas 1.1.3" package. Today, in another attempt to upgrade the untools, ArcGIS Pro installed "pandas 1.1.5" sucessfully and after that also "untools 2.6.2". Right now, I am applying the asset package of the Communication Data Management and it seems to be running successfully as well.

Best regards,
Jürgen