topic Re: ArcGIS Pro 2.5: The utility network “validate” tool fails to catch violation of connectivity rules, in ArcGIS Utility Network Questions

ArcGIS Pro 2.5: The utility network “validate” tool fails to catch violation of connectivity rules,

JamalNUMAN — Sat, 18 Jul 2020 11:34:20 GMT

ArcGIS Pro 2.5: The utility network “validate” tool fails to catch violation of connectivity rules,

For example, in the screenshot below, according to the “edge-junction-edge” connectivity rule, pipes of type (L1) is configured to be connected to pipes of same type (L1) via (D1). Despite the fact that L1 and L1 are connected without having D1, the “validate” tool is not able to catch this violation

What could be the issue here?

Re: ArcGIS Pro 2.5: The utility network “validate” tool fails to catch violation of connectivity rules,

Anonymous User — Mon, 27 Jul 2020 22:46:46 GMT

Jamal NUMAN‌

In such scenarios, I can't see any issue for the behavior of the "Validate Network Topology" tool. Especially in your case, though the junction feature named "D1" is missing in between the two line features named "L1" while you run the "Validate Network Topology" tool, the tool itself create a system junction where intermediate junction "D1" is missing and makes the subnetwork dirty. To see and know more about it please refer the "Dive-in" note of Edge-junction-edge Connectivity from Geometric coincident-based connectivity—ArcGIS Pro | Documentation

To see the system junction created you need to do the following -

update the dirty subnetwork
trace the updated subnetwork
generate the diagram from the subnetwork trace

Then you will see the system generated as (I used Naperville Electric sample geodatabase to emulate your scenario)

Daniel Simo Ravi Dhulipudi Fayaz Baig hfarzinesriaustralia-com-au-esridist

Re: ArcGIS Pro 2.5: The utility network “validate” tool fails to catch violation of connectivity rules,

HamedFarzin — Mon, 27 Jul 2020 23:10:57 GMT

Jamal NUMAN‌ , Please a look under system junction as Manoj Patil‌ mentioned, there will be system junction or there might be another rule added to make the connection between line without a junction.

Please have a look and let us know how it goes, happy to help.

Re: ArcGIS Pro 2.5: The utility network “validate” tool fails to catch violation of connectivity rules,

JamalNUMAN — Tue, 28 Jul 2020 07:53:45 GMT

My issue here is simple:

The rule states that L1 and L1 needs to be connected via D1. Now, despite the fact that L1 and L1 are connected without D1, the “validate network topology” tool fails to catch this error.

Not sure what does this mean:

“while you run the "Validate Network Topology" tool, the tool itself create a system junction where intermediate junction "D1" is missing and makes the subnetwork dirty”

All what I wanted to say here that such error needs to be identified as the “validate network topology” tool runs. At any point where L1 is connected to L1 without D1, this needs to be listed as an error. Am I correct?

Re: ArcGIS Pro 2.5: The utility network “validate” tool fails to catch violation of connectivity rules,

JonDeRose — Thu, 30 Jul 2020 15:04:12 GMT

Jamal NUMAN‌ @Manoj and @Hamed are correct. Please reference my response in the related thread here for additional detail. https://community.esri.com/thread/257080-arcgis-pro-25-the-utility-network-no-junction-edge-rule-error-is-popped-up