topic Re: update error 400 & 401 in ArcGIS Survey123 Questions

update error 400 & 401

youngpark — Fri, 21 Jul 2017 16:24:54 GMT

Good evening, Ismael & James

it is very strange. today, I was planning to update one of my surveys. I downloaded from the server then updated a couple fields then I could not upload again. (i am getting error 400 and 401) thus, I did UNDO all my changes, but I could not upload my survey.

I attached few reference screenshots. I guess the "repeat" cause some issue.

please let me know if you have any idea.

thanks,

Re: update error 400 & 401

JamesTedrick — Fri, 21 Jul 2017 16:32:01 GMT

Hi Young,

Can you double check the capitalization of your fields and name of the tables? The update of Survey123 is now much stricter on the capitalization of fields (this was done due to requirements in properly supporting ArcGIS Enterprise implementations).

Re: update error 400 & 401

youngpark — Fri, 21 Jul 2017 16:37:29 GMT

Hi James,

I noticed the announcement. and I replaced all capital letter to small. oh.. the capitalization rule apply to the "choice" tab too?

Re: update error 400 & 401

JamesTedrick — Fri, 21 Jul 2017 16:40:48 GMT

Hi Young,

On things that are already published, the key point is that they *match* what is present at the Service URL (REST API), not that they are lower case. The capitalization check does not apply to the choice tab.

As an alternative, could you try to generate a new survey from that feature service and see what differences, if any are present?

Re: update error 400 & 401

JamesTedrick — Fri, 21 Jul 2017 17:10:52 GMT

Looking at your endpoints, it seems the appropriate name for the repeat table is 'reserchresult', all lowercase.

Re: update error 400 & 401

youngpark — Fri, 21 Jul 2017 17:19:24 GMT

James, thanks for checking it. it is all lower case. hmm...

Re: update error 400 & 401

BradenBurkholder — Fri, 21 Jul 2017 17:47:19 GMT

I'm in the same boat:

https://community.esri.com/thread/198671-connect-publishing-error

Re: update error 400 & 401

JamesTedrick — Fri, 21 Jul 2017 17:49:56 GMT

As Braden, mentioned, the 401 component is the same issue that he has. Does your form contain a pulldata('@geopoint',...) function? As this isn't supported in the web form, the part of the API that generates the webform produces an error. It should not prevent the publishing of the form however- did the form get updated?

Re: update error 400 & 401

youngpark — Fri, 21 Jul 2017 18:04:06 GMT

Hi again,

I do have the pulldata("@geopoint", ${geolocation}, "horizontalAccuracy","verticalAccuracy")..

yes, it should be prevented to publish it. somehow, the connector cannot find a folder. and the folder does not have a "form" data. please see the attachment.

thanks,

Re: update error 400 & 401

JamesTedrick — Fri, 21 Jul 2017 18:08:01 GMT

This error message appears when you attempt to publish a new survey, or an initial publishing failed. Please login to ArcGIS Online (http://www.arcgis.com); in the 'My Content' area you will see a list folders on the left. You should see a folder with name in the error message. When a survey successfully publishes, it should contain a Form item and at least 1 Feature Layer item. If the Form is missing, it likely means the survey did not publish successfully the first time. It also means the Feature Layer doesn't have any data in it (you can click on the feature layer and go to the Data tab to confirm). If you delete the folder, you can re-attempt the publishing process.

Re: update error 400 & 401

youngpark — Fri, 21 Jul 2017 18:20:03 GMT

James,

thanks for your quick reply. Yes, I do understand how the ArcGIS online works. I re-attempt the process many times already. the connector does not show any error, but cannot upload a new survey.

I may need to re create excel file from the first line. I do have 80 lines in my excel file. I shall update the new survey 80 times. we will see.. which line cause the error. Hope I can do a better way.. .....

if you find any helpful resource, please let me know.

thanks,

Re: update error 400 & 401

youngpark — Fri, 21 Jul 2017 19:10:40 GMT

James,

Thanks for all your help. it was "pulldata("@geopoint"" function. after remove all the functions. I was able to publish it. hope the function works again.

thanks,

Re: update error 400 & 401

BrittneyGibbons1 — Fri, 21 Jul 2017 19:32:58 GMT

We are experiencing the same issue when trying to publish a form that contains an external choice sheet. The folder and feature layer for the survey are created, but no form layer is produced. If trying to republish an existing form, it appears to corrupt the existing form in some way - attempting to download the form produces a message that the form could not be downloaded. Deleting and attempting to republish the form again did not resolve the error. We are publishing to AGOL.

Re: update error 400 & 401

JamesTedrick — Fri, 21 Jul 2017 19:40:02 GMT

Thanks Brittney,

We're working to isolate the problem and correct.

Re: update error 400 & 401

BrittneyGibbons1 — Fri, 21 Jul 2017 19:52:18 GMT

Thanks so much, much appreciated!

Re: update error 400 & 401

RenatoSalvaleon — Fri, 21 Jul 2017 23:35:06 GMT

I think @JamesTedrick was referring to your end group for 'reserchresult' which is not on your screenshot. One thing I learned that with or without a name on the end group also works. Placing a name on eng group just makes it easier to follow for nested groups.

Re: update error 400 & 401

RenatoSalvaleon — Fri, 21 Jul 2017 23:37:31 GMT

I would hate to remove my pulldata on my form as I use three csv files for my form. I have not tested removing pulldata but the whole workflow for my work will not work without pulldata. Hope we get a resolution soon.

Re: update error 400 & 401

youngpark — Sat, 22 Jul 2017 04:50:36 GMT

Hi reneto.

The Pull function for csv file is working correctly. You might have some other issue such as the new capitalization rule for the "name" column.

Re: update error 400 & 401

RenatoSalvaleon — Sat, 22 Jul 2017 08:19:04 GMT

I'm confused by your reply. You said when you removed all the pulldata function the publishing works. I have addressed all the capitalization and still failed to publish. I also reverted back to 2.2 and I still can't republish the existing form after I make some updates. I'm using Portal for ArcGIS 10.5.

Re: update error 400 & 401

RenatoSalvaleon — Sat, 22 Jul 2017 08:33:10 GMT

A few more testing, after removing all my pulldata rows, including pulldata with geopoint, my form published correctly. Unfortunately I can't go to production without pulldata. Thanks for your comments @youngpark. I installed 2.3 again, validated my form with lower case names without pulldata and it published successfully. I then added back pulldata with geopoint and the error is back..