topic Re: Error: No imaging component suitable to complete this operation was found. in ArcGIS Runtime SDK for WPF (Retired) Questions

Error: No imaging component suitable to complete this operation was found.

MarkCollins — Tue, 26 Jul 2011 19:17:42 GMT

When launching my application today I am receiving the following error. I am loading the ESRI online streets basemap. Everything has worked fine with no change up until today. Is any one else experiencing this error? Any suggestions on the proper way to handle this?

No imaging component suitable to complete this operation was found.    at MS.Internal.HRESULT.Check(Int32 hr)
   at System.Windows.Media.Imaging.BitmapDecoder.SetupDecoderFromUriOrStream(Uri uri, Stream stream, BitmapCacheOption cacheOption, Guid& clsId, Boolean& isOriginalWritable, Stream& uriStream, UnmanagedMemoryStream& unmanagedMemoryStream, SafeFileHandle& safeFilehandle)
   at System.Windows.Media.Imaging.BitmapDecoder.CreateFromUriOrStream(Uri baseUri, Uri uri, Stream stream, BitmapCreateOptions createOptions, BitmapCacheOption cacheOption, RequestCachePolicy uriCachePolicy, Boolean insertInDecoderCache)
   at System.Windows.Media.Imaging.BitmapImage.FinalizeCreation()
   at ESRI.ArcGIS.Client.TiledLayer.tileLoadCompleted(ImageTileInfo data, Stream imgStream, Exception error)
   at ESRI.ArcGIS.Client.TiledLayer.client_DownloadDataCompleted(Object sender, DownloadDataCompletedEventArgs e)
   at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
   at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)

Re: Error: No imaging component suitable to complete this operation was found.

JenniferNery — Fri, 29 Jul 2011 18:31:44 GMT

Can you share us some code and steps to reproduce this error?

Re: Error: No imaging component suitable to complete this operation was found.

MarkCollins — Fri, 29 Jul 2011 18:42:39 GMT

This issue seems to have resolved its self within a few hours with no changes to code on my end. I think the public rest services were spitting out some incorrectly formatted data for a while or the servers could have been down.

Re: Error: No imaging component suitable to complete this operation was found.

JenniferNery — Thu, 15 Dec 2011 00:02:00 GMT

According to Mark who posted the same stack trace, the issue seemed to have been resolved without code change so it might have been the service you are hitting.

Re: Error: No imaging component suitable to complete this operation was found.

S3TelInc — Thu, 15 Dec 2011 09:16:52 GMT

According to Mark who posted the same stack trace, the issue seemed to have been resolved without code change so it might have been the service you are hitting.

It is the service i'm hitting but a day has gone by and i'm still getting the same exception. one thing i have found out so far is that it has something to do with the graphics or feature layer. Even in Sample application just adding a feature layer and graphics layer produces this problem.

attached is the application which actually does reproduces the problem. its not consistent though

Re: Error: No imaging component suitable to complete this operation was found.

S3TelInc — Thu, 15 Dec 2011 14:57:58 GMT

well now its confirmed that its problem with the services.
i wasn't able to reproduce the problem with NatGeoWorldMap service

http://services.arcgisonline.com/ArcGIS/rest/services/NatGeo_World_Map/MapServer

Re: Error: No imaging component suitable to complete this operation was found.

LuisGarcia2 — Wed, 02 Jan 2013 13:32:23 GMT

I am working on a WPF application as well. I have not made any changes to the application for almost two weeks and it was working fine before I left on vacation. I just came back, opened the application and got this error. I am currently hitting this service:

http://services.arcgisonline.com/ArcGIS/rest/services/World_Topo_Map/MapServer

I can see the map flash by as the application open and a millisecond later it crashes and returns this same error stack. So, I guess there is something going on again.

Thanks!

Re: Error: No imaging component suitable to complete this operation was found.

LuisGarcia2 — Wed, 02 Jan 2013 13:39:19 GMT

There is definitely an issue with that service. I switched to this:

http://services.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer

And now the application opens without a problem. Now, my question, how and where do I catch this error?

Thanks!

Re: Error: No imaging component suitable to complete this operation was found.

LuisGarcia2 — Wed, 02 Jan 2013 17:18:08 GMT

Any word on this? Is there a place where we can report bugs? It sure looks like one.
Thanks!

Re: Error: No imaging component suitable to complete this operation was found.

MichaelBranscomb — Thu, 03 Jan 2013 11:38:10 GMT

Hi,

This error occurs when the tile download fails because the service is not available. Unfortunately, we've not been able to reproduce this error yet.

#. Have you tried registering a handler for the TileLoading event then checking the error property? - does this contain any information?

#. Next time this error occurs it would be great if you could capture the failed tile request and response in Fiddler and post here - or email me on mbranscomb@esri.com.

Cheers

Mike

Re: Error: No imaging component suitable to complete this operation was found.

LuisGarcia2 — Thu, 03 Jan 2013 12:15:11 GMT

Hi Mike, thanks for your response. No, I have not tried option 1. I will sure try it. As far as Fiddler I will keep it in mind. I can tell you this, the error was pretty consistent in the morning (we are in US central time). In the afternoon, it was still happening for some users in a different city where my company has offices; but not in my location. The other thing is, if I understand you well, the layer was being initialized, but the error happens after that??
Thanks!

Re: Error: No imaging component suitable to complete this operation was found.

S3TelInc — Sat, 11 Dec 2021 22:16:49 GMT

Hi,
Suddenly today when running my application i'm getting the same exception and application crashes. its a WPF application and using ArcGIS online services for StreetMapLayer. I don't get it on start-up but when application is loading few graphics on the map and changing the extent of the Map.

<esri:ArcGISTiledMapServiceLayer ID="StreetMapLayer" Url="http://services.arcgisonline.com/ArcGIS/rest/services/World_Street_Map/MapServer"/>

Strangely though if i use the same Layer in another sample applicaiton that only displays the Map control with StreetMapLayer nothing goes wrong.

Any idea what exactly might be the cause of this strange behavior?

System.NotSupportedException was unhandled
  Message=No imaging component suitable to complete this operation was found.
  Source=PresentationCore
  StackTrace:
       at System.Windows.Media.Imaging.BitmapDecoder.SetupDecoderFromUriOrStream(Uri uri, Stream stream, BitmapCacheOption cacheOption, Guid& clsId, Boolean& isOriginalWritable, Stream& uriStream, UnmanagedMemoryStream& unmanagedMemoryStream, SafeFileHandle& safeFilehandle)
       at System.Windows.Media.Imaging.BitmapDecoder.CreateFromUriOrStream(Uri baseUri, Uri uri, Stream stream, BitmapCreateOptions createOptions, BitmapCacheOption cacheOption, RequestCachePolicy uriCachePolicy, Boolean insertInDecoderCache)
       at System.Windows.Media.Imaging.BitmapImage.FinalizeCreation()
       at ESRI.ArcGIS.Client.TiledLayer.tileLoadCompleted(ImageTileInfo data, Stream imgStream, Exception error)
       at ESRI.ArcGIS.Client.TiledLayer.client_DownloadDataCompleted(Object sender, DownloadDataCompletedEventArgs e)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.DispatcherOperation.InvokeImpl()
       at System.Threading.ExecutionContext.runTryCode(Object userData)
       at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Threading.DispatcherOperation.Invoke()
       at System.Windows.Threading.Dispatcher.ProcessQueue()
       at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
       at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run()
       at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
       at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ThreadHelper.ThreadStart()
  InnerException: System.Runtime.InteropServices.COMException
       Message=Exception from HRESULT: 0x88982F50
       ErrorCode=-2003292336
       InnerException:

Re: Error: No imaging component suitable to complete this operation was found.

DouglasGaston — Sat, 11 Dec 2021 22:16:52 GMT

Mike,

I am also getting this error. I started with a new WPF application and this is all the code that I have added:

<Grid>
        <esri:Map Background="White" WrapAround="True" AllowDrop="True">
            <esri:ArcGISTiledMapServiceLayer Url="http://services.arcgisonline.com/ArcGIS/rest/services/Ocean_Basemap/MapServer"/>
        </esri:Map>
</Grid>

It does not crash all the time, but frequently when I zoom in on an area.

#. Have you tried registering a handler for the TileLoading event then checking the error property? - does this contain any information?

#. Next time this error occurs it would be great if you could capture the failed tile request and response in Fiddler and post here - or email me on mbranscomb@esri.com.

I am transitioning to C# and WPF from C++, so I am not familiar with where the TileLoading event is, or how to register a handler for it.

I don't have Fiddler, but here are the details from my crash:

System.NotSupportedException was unhandled
  HResult=-2146233067
  Message=No imaging component suitable to complete this operation was found.
  Source=PresentationCore
  StackTrace:
       at System.Windows.Media.Imaging.BitmapDecoder.SetupDecoderFromUriOrStream(Uri uri, Stream stream, BitmapCacheOption cacheOption, Guid& clsId, Boolean& isOriginalWritable, Stream& uriStream, UnmanagedMemoryStream& unmanagedMemoryStream, SafeFileHandle& safeFilehandle)
       at System.Windows.Media.Imaging.BitmapDecoder.CreateFromUriOrStream(Uri baseUri, Uri uri, Stream stream, BitmapCreateOptions createOptions, BitmapCacheOption cacheOption, RequestCachePolicy uriCachePolicy, Boolean insertInDecoderCache)
       at System.Windows.Media.Imaging.BitmapImage.FinalizeCreation()
       at System.Windows.Media.Imaging.BitmapImage.EndInit()
       at ESRI.ArcGIS.Client.TiledLayer.tileLoadCompleted(ImageTileInfo data, Stream imgStream, Exception error)
       at ESRI.ArcGIS.Client.TiledLayer.client_DownloadDataCompleted(Object sender, DownloadDataCompletedEventArgs e)
       at System.Net.WebClient.OnDownloadDataCompleted(DownloadDataCompletedEventArgs e)
       at System.Net.WebClient.DownloadDataOperationCompleted(Object arg)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.DispatcherOperation.InvokeImpl()
       at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Windows.Threading.DispatcherOperation.Invoke()
       at System.Windows.Threading.Dispatcher.ProcessQueue()
       at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled)
       at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o)
       at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
       at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler)
       at System.Windows.Threading.Dispatcher.LegacyInvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs)
       at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam)
       at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg)
       at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame)
       at System.Windows.Threading.Dispatcher.Run()
       at System.Windows.Application.RunDispatcher(Object ignore)
       at System.Windows.Application.RunInternal(Window window)
       at System.Windows.Application.Run(Window window)
       at System.Windows.Application.Run()
       at WpfApplication2.App.Main() in c:\Users\dgastonadm\Documents\Visual Studio 2012\Projects\WpfApplication2\WpfApplication2\obj\Debug\App.g.cs:line 0
       at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
       at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
       at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
       at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       at System.Threading.ThreadHelper.ThreadStart()
  InnerException: System.Runtime.InteropServices.COMException
       HResult=-2003292336
       Message=Exception from HRESULT: 0x88982F50
       ErrorCode=-2003292336
       InnerException:

Any help would be appreciated.

Thanks,
Doug