topic Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log in ArcGIS Enterprise Questions

"Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

TomCohen — Fri, 07 Dec 2012 17:33:58 GMT

I have several map services running on the same server / AGS instance and one of them, which sources all its data from File GeoDatabases (which are registered folders on the server) periodically logs the following message in AGS (tagged SEVERE).

Method failed.HRESULT = 0x80070057 : The parameter is incorrect

The service is configured to always draw data dynamically, and has never been configured to create / use a tile cache. However, it also periodically logs

Failed to rename cache folder

This message is also tagged SEVERE. There doesn't seem to be any issue rendering data, and rendering time is good, so I have no idea if this is a problem or not.

Any suggestions on what's going on here would be much appreciated.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

StevenMoore1 — Wed, 12 Dec 2012 00:35:49 GMT

It's tough to say what that error could be caused by since there doesn't seem to be any impact on performance.

Do you have any other services published using the same file geodatabase data? Do they log similar errors? If you don't have any other services that use this data, can you publish a test one that does and see if it logs the same errors?

Can you try republishing this service?

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

nicogis — Wed, 12 Dec 2012 07:22:14 GMT

Tom, can you do this test?

1) with browser go in rest directory service
2) select a service and a layer in service
3) do a query (example only where ...)
4) repeat same query
Have you an error?

I have seen that I log these errors with this operations (10 sp1 and fgdb and dynamic service) but I am not sure if it is this problem. Seem that ags fails retrieve results of the same request from its cache.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

JackZHANG — Wed, 20 Mar 2013 01:13:32 GMT

we have the same problem on one of our feature access service. What does the error message mean?

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

soniadickerson1 — Tue, 26 Mar 2013 14:52:23 GMT

We have the same problem. Services producing these entries in the log files but in our case, it did affect the service. The service could be viewed from the rest endpoint but none of the layers were available.

Here's the error description from 10.1 help:

http://resources.arcgis.com/en/help/main/10.1/index.html#//00vp00000033001499

Description
The cache folder gets renamed prior to being deleted. That rename process has failed. The cache folder may be open in some other window. Some other application may currently be consuming the cache folder. The cache folder could be set to read-only.
Solution
Make sure that the service cache directory and its folders are not open in any other program or window and that they are not read-only.

Is it possible that the permissions for the cache directory maybe set up incorrectly? The Arcgis server administrator group would need read/write permissions.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

TonyAlfredsson — Mon, 23 Sep 2013 11:37:43 GMT

Hi,

Did anyone confirm this to be related to the permissions on the cache directory? We have a client with the same error who have service issues around no cache data getting displayed.

Regards, Tony

We have the same problem. Services producing these entries in the log files but in our case, it did affect the service. The service could be viewed from the rest endpoint but none of the layers were available.

Here's the error description from 10.1 help:

http://resources.arcgis.com/en/help/main/10.1/index.html#//00vp00000033001499

Description
The cache folder gets renamed prior to being deleted. That rename process has failed. The cache folder may be open in some other window. Some other application may currently be consuming the cache folder. The cache folder could be set to read-only.
Solution
Make sure that the service cache directory and its folders are not open in any other program or window and that they are not read-only.

Is it possible that the permissions for the cache directory maybe set up incorrectly? The Arcgis server administrator group would need read/write permissions.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

AlinaTaus — Tue, 25 Feb 2014 10:35:57 GMT

Hi,

I am experiencing the same problem as everyone else on this thread. The two error messages are logged every time I publish/re-publish a service. The map services seem to work fine, although we've had some issues with users not being able to save their field edits. The error message reads "An error occurred while posting feature edits. Unable to compute operation". After several attempts the edits do get saved eventually. I am not sure if this issue is related to this error message or not, we've also had some issues with our SDE database...

Does anybody have any updates on this?

Thank you very much!

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

NielsVemmelund1 — Thu, 07 Aug 2014 11:39:44 GMT

the cache rename error is a known bug

http://support.esri.com/en/bugs/nimbus/role/beta10_1/TklNMDg5MTY2‌

regard, niels

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

TammyKobliuk — Thu, 14 Aug 2014 23:44:08 GMT

niels - the URL you provided appears to be in a password-protected beta testing area. Are you able to extract and post some text? I am currently dealing with the same issue...

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

NielsVemmelund1 — Fri, 15 Aug 2014 06:06:41 GMT

Sorry about that

I searched for this issue while i was logged in.

The result without login is

http://support.esri.com/en/bugs/nimbus/TklNMDg5MTY2

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

GabiVoicu — Tue, 22 Mar 2016 19:36:33 GMT

Two more versions pass by and sure enough coming across exact same error in ArcGIS Server 10.3

Method failed.HRESULT = 0x80070057 : The parameter is incorrect

The service looks fine in the rest point as well as the query on a certain layer but the app does not display this one layer in particular from the service that throws this error ...it's not consistent either ...

It's been a while since this post was started - is anyone else is seeing this error in 10.3 ?

Thank you

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

ChrisJensen — Fri, 22 Apr 2016 15:45:58 GMT

I am getting this error in 10.3.1 while trying to publish an editable feature layer, followed by 'Failed to rename cache folder' error

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

GerardEddy — Tue, 31 Jan 2017 15:23:57 GMT

Is this still an issue for anyone? Has anybody come across this error in relation to a Dynamic Service? There is no cache associated with the service. Niels' links were dead ends. one was a 404 error, the other gave a "site error" and informed me the administrator was notified.

Was/Is this a known bug with respect to dynamic services?

Thanks all, in advance.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

AndyBradford — Mon, 24 Apr 2017 14:20:18 GMT

I'm getting this error, and it seems to be causing a service publish to fail. We have a third-party SOE that has to be enabled in the service's Capabilities to function, and this error message appears as it's failing. It works if the service is pushed without the SOE, but if I enable it it fails.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

KarenFolger — Thu, 06 Jul 2017 16:31:00 GMT

I am getting this same error publishing at 10.5.1. I made sure that my ArcGIS Server Service account had all the permissions to the Cache folder and all the other arcgiserver folders and that they were not read-only. I re-published several services and got this same sequence of errors on every service. They are dynamic feature services from a file geodb on the same server. The services do work but excessive logging concerns me. All errors are SEVERE:

Failed to rename cache folder.

Method failed.HRESULT = 0x80070057 : The parameter is incorrect. . - for the Source service - this msg shows twice.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

ApurvDanke — Thu, 02 Nov 2017 00:05:46 GMT

Hi,

I am also having the issue as given below in ArcGIS Server logs.

In my case, I have a web service which calls the "ExportMap" method of ArcGIS Server REST API for a particular dynamic map service to generate a map image for a given extent. In few cases such as mentioned above, the web service fails to generate a map image because of the errors mentioned above in ArcGIS Server logs. When I checked the same scenario again, the image was retrieved successfully and generally it works. It is these one off cases where I've observed that it fails. I am using ArcGIS Server 10.4.1. Any suggestions?

Regards,

Apurv

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

CesarAlvear — Mon, 13 Nov 2017 15:39:10 GMT

Encontré la solución aquí, en mi caso funciono..!

The solution here.!

BLOG DE CMAV: Method failed.HRESULT = 0x80070057 : The parameter is incorrect. .

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

TaraPreston — Mon, 14 May 2018 21:38:41 GMT

Hi Cesar. Do you by chance know if this has been translated into English anywhere? Thanks.

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

davehorsey1 — Fri, 22 Jun 2018 07:42:39 GMT

Hi Tara. Open the link in Chrome and it'll translate the page for you.

This error code and message can also be seen in other applications. Has anyone in the thread tried to do the registry tweaks mentioned in this article - Error Code 0x80070057 - Causes and Methods to fix it | Fix Errors

Change you make to the registry are done at your own risk, etc, etc

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

DaveSivertsen — Mon, 27 Aug 2018 16:58:17 GMT

This link is no longer valid. Anyone care to post the solution that used to be there?

We have this issue as well.

Thanks.

topic Re: &quot;Method failed.HRESULT = 0x80070057 : The parameter is incorrect&quot; in AGS 10.1 log in ArcGIS Enterprise Questions

"Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Method failed.HRESULT = 0x80070057 : The parameter is incorrect

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log

topic Re: "Method failed.HRESULT = 0x80070057 : The parameter is incorrect" in AGS 10.1 log in ArcGIS Enterprise Questions