topic Re: Adding Multiple Point's of Coordinate in ArcGIS API for Silverlight Questions

Adding Multiple Point's of Coordinate

MuhammadWaqar_ul_islam — Wed, 07 Dec 2011 12:31:45 GMT

i m using http://help.arcgis.com/en/webapi/silverlight/samples/start.htm#Project sample to plot x,y values
i have add a text file that contain x,y value and plot a last point[x,y] from an array values

My problem is how to add multiple point value from an array not a single value
when i run this code

double ax = 0 ; double ay = 0;
          MapPoint inputMapPoint = new MapPoint(ay, ax, new SpatialReference(4326));
          while (i <= count)
          {
              double.TryParse(test[i, 0], out ax);
              double.TryParse(test[i, 1], out ay);
              inputMapPoint.X = ay;
              inputMapPoint.Y = ax;
              geometryService.ProjectAsync(new List<Graphic>() { new Graphic() { Geometry = inputMapPoint } }, MyMap.SpatialReference, inputMapPoint);
              i++;
          }

its gives this error "Task does not support concurrent I/O operations. Cancel the pending request or wait for it to complete."

geometryService.ProjectAsync(new List<Graphic>() { new Graphic() { Geometry = inputMapPoint } }, MyMap.SpatialReference, inputMapPoint);

Re: Adding Multiple Point's of Coordinate

DominiqueBroux — Sun, 12 Dec 2021 04:12:09 GMT

its gives this error "Task does not support concurrent I/O operations. Cancel the pending request or wait for it to complete."

The problem is that you execute your task in the loop --> multiple times : that's not supported.

Instead, you should build your graphics list in the loop and execute the task once after the loop.

Something like:

 
IEnumerable<Graphic> graphics = new List<Graphic>();
while (i <= count)
{
double.TryParse(test[i, 0], out ax);
double.TryParse(test[i, 1], out ay);
graphics.Add(new MapPoint(ay, ax, new SpatialReference(4326));
i++;
}
geometryService.ProjectAsync(graphics, MyMap.SpatialReference, null);

Re: Adding Multiple Point's of Coordinate

CHRISTOSCHARMATZIS — Sun, 12 Dec 2021 04:12:11 GMT

The problem is that you execute your task in the loop --> multiple times : that's not supported.

Instead, you should build your graphics list in the loop and execute the task once after the loop.

Something like:
 
IEnumerable<Graphic> graphics = new List<Graphic>();
while (i <= count)
{
double.TryParse(test[i, 0], out ax);
double.TryParse(test[i, 1], out ay);
graphics.Add(new MapPoint(ay, ax, new SpatialReference(4326));
i++;
}
geometryService.ProjectAsync(graphics, MyMap.SpatialReference, null);
 

but the IEnumerable does not contain .Add method...?
What can we do then...?

Re: Adding Multiple Point's of Coordinate

DominiqueBroux — Thu, 08 Dec 2011 08:01:03 GMT

but the IEnumerable does not contain .Add method...?
What can we do then...?

Sorry.
IList<Graphic> graphics = new List<Graphic>();
.......

Re: Adding Multiple Point's of Coordinate

MuhammadWaqar_ul_islam — Thu, 08 Dec 2011 09:57:39 GMT

still getting error on this
graphics.Add(new MapPoint(ay, ax, new SpatialReference(4326)));

Error2:Argument 1: cannot convert from 'ESRI.ArcGIS.Client.Geometry.MapPoint' to 'ESRI.ArcGIS.Client.Graphic'

Error1: The best overloaded method match for 'System.Collections.Generic.ICollection<ESRI.ArcGIS.Client.Graphic>.Add(ESRI.ArcGIS.Client.Graphic)' has some invalid arguments

what next to do

Re: Adding Multiple Point's of Coordinate

CHRISTOSCHARMATZIS — Fri, 09 Dec 2011 09:12:10 GMT

Sorry.
IList<Graphic> graphics = new List<Graphic>();
.......

I try to change it from List to IList but I still have the same error..
"Task does not support concurrent I/O operations. Cancel the pending request or wait for it to complete."

I have tried the IEnumerable solution...but I get the same error as....Waqar82_geo.

Re: Adding Multiple Point's of Coordinate

MuhammadWaqar_ul_islam — Sat, 10 Dec 2011 05:50:43 GMT

As thier any other way to plot multiple point
i m stuck here
special help is appreciated

Re: Adding Multiple Point's of Coordinate

MuhammadWaqar_ul_islam — Sat, 10 Dec 2011 13:07:05 GMT

i haved another way but still only single point is ploted on the map

private void mapWells_Loaded(object sender, RoutedEventArgs e)
        {
            GraphicsLayer wellsLayer = mapWells.Layers["WellsLayer"] as GraphicsLayer;
             // wellsLayer = mapWells.Layers["WellsLayer"] as GraphicsLayer;
   if (wellsLayer == null)
            {
                wellsLayer = new GraphicsLayer()
                {
                    ID = "wellsLayer"
                };
                mapWells.Layers.Add(wellsLayer);

                Graphic marker = new Graphic();
                marker.Symbol = new SimpleMarkerSymbol();
                wellsLayer.Graphics.Add(marker);
            }
            double[] x = new double[] { 305737.67, 305937.67, 305837.67, 305637.67 };
            double[] y = new double[] { 2740242.96, 2740252.96, 2742232.96, 2739232.96 };
            //for (int External = 0; External < 1; External++)
            // for (int Internal = 0; Internal < 1; Internal++)
            MapPoint[] location = new MapPoint[1];
            for (int i = 0; i < 1; i++)
            {
                location = new MapPoint(x, y, new SpatialReference(4326));
                wellsLayer.Graphics[0].Geometry = location;
            }

            //MapPoint location = new MapPoint(305737.67, 2740242.96, mapWells.SpatialReference);
            //wellsLayer.Graphics[0].Geometry = location;
       }

is there any possibility or not to plot

Re: Adding Multiple Point's of Coordinate

DominiqueBroux — Tue, 13 Dec 2011 07:46:44 GMT

is there any possibility or not to plot

I am not sure to exactly understand what you mean.
In your last post, you are just trying to add graphics in a loop. That's obviously possible, there is a sample here:
http://help.arcgis.com/en/webapi/silverlight/samples/start.htm#AddGraphics

If I come back to the first posts :
- it's possible to project multiple graphics by calling only once the project task : you just need to give the list of graphics as input of the task.
- if, for any reason, you absolutely need to execute tasks in //, you have to instantiate new task objects. One single task doesn't support concurrent operation.

Re: Adding Multiple Point's of Coordinate

MuhammadWaqar_ul_islam — Fri, 23 Dec 2011 05:22:37 GMT

i am able to plot multiple point on my map code is attached
but one error occurs for the Input coordinate for multiple points only

MapPoint inputMapPoint = e.UserState as MapPoint;
resultGraphic.Attributes.Add("Input_Coordinate", inputMapPoint.X + "," + inputMapPoint.Y);

error Object reference not set to an instance of an object.
error prt screen is attached

void OnWebReadCompleted(object sender, OpenReadCompletedEventArgs e)
{

double ax = 0; double ay = 0; long az = 0;

IList<Graphic> graphics = new List<Graphic>();
while (i <= count)
{
double.TryParse(test[i, 0], out ax);
double.TryParse(test[i, 1], out ay);
MapPoint inputMapPoint = new MapPoint(ay, ax, new SpatialReference(4326));
graphics.Add(new Graphic() { Geometry = inputMapPoint });

i++;

}
geometryService.ProjectAsync(graphics, MyMap.SpatialReference, null);

}

void geometryService_ProjectCompleted(object sender, GraphicsEventArgs e)
{
int i;
for (i = 0; i < e.Results.Count; i++)
//e.Results.Count
{
Graphic resultGraphic = new Graphic();
resultGraphic = e.Results;
Graphic resultGraphic2 = new Graphic();
if (resultGraphic.Geometry.Extent != null)
{
resultGraphic.Symbol = LayoutRoot.Resources["RoundMarkerSymbol"] as SimpleMarkerSymbol;

MapPoint resultMapPoint = resultGraphic.Geometry as MapPoint;
resultGraphic.Attributes.Add("Output_Coordinate", resultMapPoint.X + "," + resultMapPoint.Y);

MapPoint inputMapPoint = e.UserState as MapPoint;

resultGraphic.Attributes.Add("Input_Coordinate", inputMapPoint.X + "," +inputMapPoint.Y);

graphicsLayer.Graphics.Add(resultGraphic);

}
else
{
MessageBox.Show("Invalid input coordinate, unable to project.");
}
}
}

Re: Adding Multiple Point's of Coordinate

CHRISTOSCHARMATZIS — Fri, 23 Dec 2011 15:14:11 GMT

THE PROBLEM WITH THE I/O operations IS THAT YOU DON'T NEED ALL THESE....
CHECK THIS LINK
http://resources.esri.com/help/9.3/arcgisserver/apis/silverlight/help/Geometry_task.htm

AT THE PROJECT PARAGRAPH..

GeometryService geometryService = new GeometryService("http://sampleserver1.arcgisonline.com/ArcGIS/rest/services/" +
"Geometry/GeometryServer");
geometryService.ProjectCompleted += GeometryService_ProjectCompleted;
GraphicsLayer graphicsLayer = MyMap.Layers["MyGraphicsLayer"] as GraphicsLayer;
geometryService.ProjectAsync(graphicsLayer.Graphics.ToList(), new SpatialReference(54025));

AND THEN...
private void GeometryService_ProjectCompleted(object sender, ESRI.ArcGIS.Client.Tasks.GraphicsEventArgs args)
{
GeometryService geometryService = new GeometryService("http://sampleserver1.arcgisonline.com/ArcGIS/rest/services/" +
"Geometry/GeometryServer");
geometryService.AreasAndLengthsCompleted += GeometryService_AreasAndLengthsCompleted;
geometryService.AreasAndLengthsAsync(args.Results);
}

THAT WORKED FOR ME...!!!