topic Re: ArcGIS Pro Address Rematch Problem in Addressing Questions

ArcGIS Pro Address Rematch Problem

JoeBorgione — Tue, 09 Jun 2020 22:17:15 GMT

ArcGIS Pro 2.5.1; Single Role Street Address Locator

I created a single role, street address locator and have been using it this afternoon, on a few tables. Rematching worked just fine for the first few geocoded results, but this latest one is misbehaving. Typically as I click through the unmatched addresses, I can make an edit to the address, hit the tab key, followed by the Apply button and get either suggestions or not. Now, when I make the edit and then hit tab, apply, it kicks me back to the first record of the unmatched stack. See gif below. What is going on here?

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Thu, 11 Jun 2020 18:02:45 GMT

I'm not able to reproduce that behavior in 2.6 beta. Curious if you get the same when you geocode with zone as part of the address. If you are part of the beta program you may want to test out some of your workflows in 2.6 beta.

Re: ArcGIS Pro Address Rematch Problem

JoeBorgione — Mon, 15 Jun 2020 22:15:10 GMT

This might be a stretch but I think it has to do with the locator I used which is a published composite (10.8 address locators I believe). I used the service again today and the results were quirky, so I used a file based (not published) address locator and it worked well, and now weird behavior when rematching...

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Wed, 17 Jun 2020 05:34:04 GMT

How many locators in the composite? ArcGIS Server 10.8?

Re: ArcGIS Pro Address Rematch Problem

PaulaMorrissey — Tue, 17 Nov 2020 06:53:17 GMT

Mine does that when I use a predefined query to filter those I want to rematch. It is really annoying. Was there a solution?

Re: ArcGIS Pro Address Rematch Problem

JacobHelfman1 — Tue, 24 Nov 2020 22:13:21 GMT

@ShanaBritt @BrettStokes @ZacharySutherby I am also experiencing this issue and am using a file-based address locator in ArcGIS Pro. This issue causes our workflow to be much less efficient than it should be. Does this require me to propose a new idea to GeoNet?

Re: ArcGIS Pro Address Rematch Problem

JoeBorgione — Tue, 24 Nov 2020 22:27:12 GMT

This thread is several months old and I've since migrated to 2.6 pro and only using the the new style locators with the create locator tool. Sorry but I cannot remember what was going on here.

@PaulaMorrissey and @JacobHelfman1 can you explain your product version, workflows, locators etc and the problems you are encountering in more detail?

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Tue, 01 Dec 2020 15:58:11 GMT

Does the behavior occur with a custom query as well vs the defined queries like 'Matched addresses with score below 80'? Are you also using the tab key without Auto Apply checked on?

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Thu, 10 Dec 2020 00:19:21 GMT

What version of ArcGIS Pro are you using when reviewing the geocode results? Are you reviewing a selection of the geocode results? Is Auto Apply checked in the Rematch Addresses pane?

Re: ArcGIS Pro Address Rematch Problem

JacobHelfman1 — Mon, 14 Dec 2020 16:29:40 GMT

@ShanaBritt Product Version: ArcGIS Pro 2.4.3 (Advanced, Concurrent Use license).

Yes, I am reviewing a selection of the results, which are the most recent (the most recent Date field values). I have to retain all the records in the layer, so I do not use a Predefined Query from Rematch Addresses. The Auto Apply button is checked on in the Rematch Addresses pane.

Re: ArcGIS Pro Address Rematch Problem

JacobHelfman1 — Sun, 27 Dec 2020 16:51:33 GMT

@JoeBorgione Thought I'd give you an update on the status of this. I created a workaround for this bug by using a python script. The script uses the pyautogui and keyboard modules. When the script runs, it causes your mouse to left-click an infinite amount of times wherever the cursor is currently placed and it will stop when you press ‘q’.

Product Version: ArcGIS Pro 2.4.3 (Advanced, Concurrent Use license).

Workflow: First, I convert an Excel Worksheet into a File Geodatabase Table to import the table into a map in a Pro project. I then right click the table in Contents > Geocode Table. I go to 'Go to Tool' in the Geocode Table pane to access the Geocode Table pane. From there, I use a Composite locator, which uses a General - Single Field locator. Both are saved locally. The Input Address Fields and Locator Field parameters to Multiple Field and Data Field, respectively. The 'Add output to map after completion' option is enabled/checked on. I assign fields to the Street or Intersection, City or Placename, and ZIP Code parameters. The output point feature class is saved in my project's Default.gdb.

Re: ArcGIS Pro Address Rematch Problem

AndrewLowerre — Wed, 10 Feb 2021 17:05:17 GMT

@ShanaBritt Resurrecting a (semi-)dormant thread here... I have exactly the same problem as the OP.

Using ArcPro 2.7.1, with a local/file based locator.

If I apply any query (custom or predefined), the problem occurs. And it does not matter whether Auto Apply is checked or not -- the problem always occurs with any query applied to the results.

Any insight?

Many thanks in advance!

Re: ArcGIS Pro Address Rematch Problem

JoeBorgione — Wed, 10 Feb 2021 17:20:30 GMT

In this more recent post I mention the problem again, but haven't received a reply.

@BradNiemand

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Tue, 23 Feb 2021 01:05:39 GMT

All, I have been able to reproduce the behavior in Pro 2.7 and the team will look into for a future release of ArcGIS Pro. I will look into a possible workaround workflow and post the steps. If I am able get a suitable workaround workflow I will post it.

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Fri, 16 Jul 2021 16:55:36 GMT

A bug that you can track for this behavior is available, BUG-000141513.

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Fri, 27 Aug 2021 15:23:55 GMT

The behavior described in the original post where are jumped back to #1 in the Rematch Addresses Pane when geocoded records are selected during the rematch process is in our plans to address and can be tracked with BUG-000141513. If you are part of the Early Adopter Program you can test out you workflow when Pro 2.9 Beta1 is available.

Re: ArcGIS Pro Address Rematch Problem

GeorgeBrown1 — Tue, 26 Jul 2022 15:12:11 GMT

@ShanaBritt found this thread as to being as close to the issue I am seeing for the first time trying to Rematch Addresses. In the past, the Rematch window would allow the user to correct the address or, in our case ESN instead of Zip Code, and now the ESN option is not available to change, which is what I need to do. See snapshot below. I am using 2.9.3 and have been with Rematch. Auto Apply is checked. No help regardless on using Predefined Queries or not. This is a first so I am dead in the water.

Re: ArcGIS Pro Address Rematch Problem

ShanaBritt — Tue, 26 Jul 2022 20:12:15 GMT

@GeorgeBrown1 When geocoding the table which Output Fields option did you select in the Optional Parameters section of the Geocode Addresses tool or Geocode Table tool?

Re: ArcGIS Pro Address Rematch Problem

GeorgeBrown1 — Tue, 05 Sep 2023 17:10:19 GMT

Hey @ShanaBritt ,

For the Output Fields I leave as default, All.

So I am still having the same issue with 3.1.3, below screen shot. I have tried saving the output to a shapefile, not supported, the project FGDB as a FC, no luck, creating a new FGDB and saving as a FC there, with no luck. I have pointed the 'Locator', within the Rematch Addresses window to the exact locator used to geocode the spreadsheet, no luck. I have played with the fields under the 'Select Fields' options, no luck. This is twice now, where I am unable to run the Rematch Addresses tool on a geocoded file in two different Pro projects.