POST
|
Hey David Wasserman with my example above, I would still expect a lower different NumTrips and route count for 5minutes vs. 30minutes thresholds but the results are the same.
... View more
10-29-2018
05:42 PM
|
0
|
1
|
1631
|
POST
|
^ clarifying that by headway threshold i mean frequency threshold. E.g. how many trips occur between 7am-10am where the route has a frequency of say a 10 minute threshold or better.
... View more
10-28-2018
10:47 PM
|
1
|
0
|
1631
|
POST
|
Thanks David, yes I'm after a process to calculate the trips count within a headway threshold.
... View more
10-28-2018
03:59 PM
|
1
|
1
|
1631
|
POST
|
Hey Miranda I've started afresh and have re-run the tools, I've selected a single date e.g. 20181024 and am able to get meaningful results from the Count Trips at points / stops tool. The input is still the nested GTFS files. The Count High Frequency Routes at Stops tool seems to produce the same results no matter what the headway threshold is over a given period e.g. I would expect a lower different trip count for 5minutes vs. 30minutes but the results are they same.
... View more
10-23-2018
07:57 PM
|
0
|
5
|
1631
|
POST
|
Hey David Thanks for getting back to me, yes the nested folders represent the different public transport modes so I read them all in at once. e.g. 1 - Regional Train 2 - Metropolitan Train 3 - Metropolitan Tram etc etc page 4: http://data.ptv.vic.gov.au/downloads/PTVGTFSReleaseNotes.pdf I've tried running the other tools but I don't get an output (despite the results panel showing that there was no error).
... View more
10-18-2018
04:25 PM
|
0
|
0
|
1631
|
POST
|
When running the headway threshold, i am getting the same results e.g. for NumTrips etc when i use a 5min vs. a 20min threshold. My input is, so i would assume that the data is somewhat clean, has anyone had this issue? PTV Timetable and Geographic Information - GTFS - Datasets | Victorian Government Data Directory
... View more
10-17-2018
11:43 PM
|
0
|
9
|
2066
|
POST
|
I'm editing a feature class from a gdb and have been getting the above error quite often. Each time this happens, I lose any edits that I have created since the last save. I'm the only accessing this layer so it's not being locked by anyone else. Has anyone come across this problem?
... View more
02-13-2018
05:54 PM
|
0
|
2
|
1177
|
POST
|
Hi Jay, Is setting up barriers the most efficient method? The road network is quite large, each road has a class code e.g. highway, local road. As an example, I just need a way to define that highways = no delay, local roads = 5 seconds
... View more
01-17-2018
01:37 PM
|
0
|
1
|
450
|
POST
|
Is it possible to apply a delay depending on your road type within a road network e.g. for highways vs. city roads .... to account for traffic light delays, congestion etc? (I know you can apply a delay if you have a point file where you have known traffic light points.)
... View more
01-16-2018
03:10 PM
|
0
|
3
|
629
|
Title | Kudos | Posted |
---|---|---|
1 | 10-28-2018 03:59 PM | |
1 | 10-28-2018 10:47 PM |
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:25 AM
|