POST
|
Hi Scott, Thanks so much for your prompt reply. I did take a look at the Distributed Collaboration. It seems like a good option for us. I'll need to talk to our Database Manager about it. The good thing is we're considering deploying Portal for ArcGIS in our organization in a near future, so that might help to solve the problem. Thanks again!
... View more
01-23-2019
05:56 AM
|
0
|
0
|
1877
|
POST
|
Hi Cody, In your previous comment, you mentioned this: If you have ground control points, do you know how to withhold some from the processing and apply them as Check points to measure your output accuracy? If you need instructions on that, I can send information. Can we withhold the check points directly in the Drone2Map software? If you don't mind, could you share the information please? Thanks!
... View more
01-22-2019
05:16 AM
|
0
|
0
|
420
|
POST
|
After running a project with GCPs, the generated report shows that I used GCP in the analysis process. However, I'm not sure how that RMSE under Quality Check/Georeferencing was calculated. Does D2M take into account the accuracy of the GCPs? I just don't see that info entered in D2M. Thank you!
... View more
01-18-2019
09:13 AM
|
0
|
0
|
392
|
POST
|
Scott Prindle wrote: While it could be possible to replicate a hosted feature service to your enterprise geodatabase, there is not currently a supported/documented workflow. It may be possible through a script and use of the sync workflow. The createReplica operation can be used to generate JSON of the data, which could then be dumped into the enterprise geodatabase. The replica will persist on the hosted feature service, so edits on both ends can continue to be synced. This would be quite an undertaking in Python, but it is definitely something to consider if you must go that way. If you're interested in going down this rabbit hole we can definitely talk about this in more detail. Hi Scott, I know the original question is quite old (> 2 years), but I'm now into the same problem that the OP had. I have a hosted feature service on AGOL that routinely needs to be synced back to the enterprise geodatabase. Please note that our organization's AGOL and enterprise GDB are separate. I'm interested in the solution that you wrote above. I wonder if you could post some more details about that solution. Thanks!
... View more
01-18-2019
05:11 AM
|
0
|
2
|
1877
|
POST
|
Is there any follow-up on this feature of Workforce? We'd love to have the Push Notification as keeping the app open (with location tracking) is draining the battery horribly.
... View more
11-15-2018
01:11 PM
|
0
|
4
|
1327
|
POST
|
Hi, I'm running a project in Drone2Map using 43 nadir images on an area of 3.14 acres. I have 4 GCPs in this project. However, whenever I tried to include the GCPs in the processing, this error comes up: "Caught unknown exception during initial process". I tried to run the project with just the images. That resulted in 2D products and 3D point cloud (per my Processing options). However, I can't use these products because they are way off. I was hoping to use the GCPs to improve the accuracy of my project. I'm attaching here the end of the project log. I'm not sure what causes this error.
... View more
10-11-2018
05:56 AM
|
0
|
5
|
1823
|
POST
|
Hi Miki, I flew the drone again according to your suggestion, this time in an area with more content differences. I got better results and now am able to see trees, display point cloud, etc. Thank you so much for your reply!
... View more
04-28-2018
12:25 PM
|
1
|
1
|
832
|
POST
|
Hi all, I started a pilot project to test out Drone2Map. My project is on a small area where there is mostly grass and a few trees. The drone I used was DJI Mavic Pro Quadcopter. All of the pictures I took were nadir. The products I got from Drone2Map are orthos, DSM, Hillshade, and point cloud. Attached is the Processing Report of my project. I have a few problems: - The DSM and the point cloud didn't pick up trees in the image. - Although point cloud was generated ( i can view it in 2D map), I cannot view it 3D at all. I'm brand new to Drone2Map, so I have no idea what's going on. I've done lots of research, but doesn't seem like anybody has run into the same problem. Any help would be much appreciated! Best,
... View more
04-25-2018
11:12 AM
|
0
|
3
|
2518
|
Title | Kudos | Posted |
---|---|---|
1 | 12-05-2018 12:24 PM | |
1 | 04-28-2018 12:25 PM |
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:24 AM
|