POST
|
I need a widget that gives the ability to add a point/edit a feature service based on coordinates. So, search by coordinates and drop a point at the exact coordinates. So simple in desktop, but I haven't come across this yet. Has this been created?
... View more
11-05-2015
07:51 AM
|
0
|
0
|
789
|
POST
|
I need to remove the credits from the base maps too. But I'm only working in Desktop (ArcView 10.2.2) and not creating a web map. Do I go about this the same way?? If so, can someone dumb it down for me? I'm not familiar with web mapping and all that goes along with it. Thanks! Danielle
... View more
05-27-2014
04:43 PM
|
0
|
0
|
467
|
POST
|
Jim, I also map pipelines and that does make up a majority of my work. The attachments that I included previously were not pipelines, but it was just to show you how I display the inset with the current page highlighted. Our field people use my maps in the field and they find it quite easy to follow along, especially with the inset showing which page they are currently on (and no match lines). I always keep north, well, north and never rotate my data frame. I think it makes it easier on the field crew and others reviewing the maps. As for your match line problem, I'm guessing that you drew your match line (assuming it is a graphic) "on the page" in layout view, instead of "on the world" (I'm sure there's a better way to say this, but that's how I've always described it). With data driven pages enabled, any text or graphic "on the page" will be seen on all pages. Basically with data driven pages, you have one layout/one page and the only thing that changes is the extent of your data frame, with the exception of dynamic text which has become a favorite of mine. If you want, I can include some attachments if you want to see my pipeline mapping.
... View more
05-17-2013
09:42 AM
|
0
|
0
|
2279
|
POST
|
Jim, I haven't used match lines since I started using data driven pages and the grid index tool. It really isn't necessary to and was very time consuming with the way I was doing it. With the grind index tool (toolbox > cartography > data driven pages > grid index features), polygons are made based on size inputs that you specify within the tool. For me, I set the size based on extent of the map and data frame size when in layout view. To figure this out, bring up the data frame properties dialog box, go to the size and position tab, and under "size" you will see the width and height of your data frame that exists on a page. If you have an 8.5 x 11 layout, the size of your data frame will be different than if you are working in an 11 x 17 layout. Basically, it's the size of your data frame in page units (inches). So once your grid is made, you have several choices of how to display it. I put an inset into the corner of my map, zoom to the extent of the grid index, and with the help of "Definition query" I highlight (for lack of a better word) the page that the person is looking at while the other pages are grayed out (still seen, but, in a sense, transparent). I've included an attachment so you can see what I mean. Alternatively, you could display the grid index on your map so you can see the bounding lines of the grid (example 2 attached). This one is zoomed out a bit more than the first one, but that's a function that you can set within the "map extent/best fit" within the "setup data driven pages" dialog box. This may seem like a lot of work to do each time you want to make a map book, but I have templates saved so my width/height is always the same (exceptions between 8.5 x 11 and 11 x 17 layouts). Also, I've used model builder to make a few models that create the grid, assign the size and extent, and even symbolize it for me. I only have 2 inputs, click ok, and my grid is done in seconds. Let me know if you have any other questions. Danielle
... View more
05-15-2013
10:04 AM
|
0
|
0
|
2279
|
POST
|
Hi, I need to be able to calculate the length of multiple polygons that intersect another polygon. Basically I have a buffer (around a line) with multiple polygons (representing wetlands) that intersect it. I need to be able to calculate the longest length of each intersecting wetland within the buffer. To further complicate this, the length needs to run parallel to the buffer (or line it was created around). Any ideas? Thanks! Danielle
... View more
04-12-2013
12:37 PM
|
0
|
1
|
2844
|
POST
|
And you can do it directly from the Table of Contents. Right click on your shapefile/layer, choose "Data>Export to CAD". It's the same tool from the toolbox as was mentioned previously, just a quicker way to get it.
... View more
10-17-2012
09:58 AM
|
0
|
0
|
300
|
POST
|
So I thought that I would reply to my own post after seeing so many people have checked it out. I use Grid Index Features/Data Driven Pages all the time now and choose the desired shapefile for it to be drawn around (line or polygon). I do have to move the grid around to get a "best fit" to my pipeline, but the process isn't very painful (just double click box to bring up vertices/select all vertices/snap to adjacent grid box). I never use "Calculate adjacent field" and never really looked into it. I have gotten Data Driven Pages to do what I need it too and also love dynamic text! So much easier!! I'll try to answer any questions on the subject. Ask away.
... View more
10-17-2012
09:31 AM
|
1
|
0
|
2279
|
POST
|
I need some help in creating a map book. My project area is a pipeline that curves, turns, and has extensions coming off it, sometimes relatively parallel to major line. I've tried using the grid index and the strip map index tools to designate/reference my pipeline and have found pros and cons to both, but neither tool functions the way I need it to. The strip map index follows the pipeline, but the polygons created are angled. If I were to put this together as a map book, I'd have a lot of overlapping that is not desired. The grid index doesn't provide a "best fit" to my line and yields extra polygons. I know I can move and delete the polygons for a better fit to my line, but then I can't Calculate Adjacent Fields, etc. because now that I have moved the polygons, they don't neatly line up (plus the page name/number no longer follows any logical manner). I've been trying to learn this process from the example in the Help menu, but my project area is so much different, it's been frustrating trying to adapt it to my needs. Another issue is that I'm working in a State Plane coordinate system and the Help example uses UTM. It also requires a "Calculate UTM Zone" tool which is used in the Data Driven Pages as a Spatial Reference. Basically, I need to create a map book with an index layer that follows along the pipeline, much like the grid index, but with a "best fit" to my line. And it needs a spatial reference. Up until now, I've been setting up bookmarks and manually adding match lines. I'd pdf each bookmark separately (sometimes 80+ bookmarks/pdf'd maps) and change the map number as needed. I would really like to be able to use this new functionality in ArcMap 10 (dynamic text included). It doesn't seem that it should be as complicated as I'm finding it to be. Any help would be greatly appreciated.
... View more
04-26-2011
10:41 AM
|
0
|
12
|
7049
|
Title | Kudos | Posted |
---|---|---|
1 | 10-17-2012 09:31 AM |
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:23 AM
|