Latest Contributions by MarkusWall1

‎12-09-2023

I had the same issue. You have to open the properties window of the subtype layer group and go to the tab Subtype. There you can add and remove subtypes from the subtype layer group.

‎09-28-2023

So it runs smooth on your computer, right. Maybe the graphics chip from magic leap has to less performance to run the 3d model. Or the models are not optimized for one of this graphics chips. Unfortuately I haven't found any performance comparisons of the AMD GFX10.2. But the graphics chip has to render twice the images of your computer in a higher framerate. Maybe someone from Esri reads that topic and has an answer to that issue.

‎09-28-2023

Can you post your computer configuration? We are running a lot of scene layers with HTC Vive in VR and they are performing really well. Are you streaming the scene layer from portal, online or from slpk files? An issue, that I've observed with our configureation is, that the overall performance of the VR mode is worse when unity is not running in adminitration mode.

‎09-22-2023

Hello, Is it possible to higlight the affected object in the map? I see all the features selected for the report as selected items. Would also be nice to be able to set the affected object into a definition query, to only see this one in the map. A previewmode would speedup the design process of the report a bit, otherwise I always have to export the report and that takes a long time. Thanks, Markus

‎08-20-2023

Hi Winfried, same problem here with transperency and using hosted scene layers. For me it was even not possible to activate or deactivate layers in the source code. Same setup, but using unity 2021,3,28f1 Best regards, Markus

‎06-12-2023

Hi, first you add the Revit or IFC file to an ArcGIS Pro Scene, then you configure the view you want to use in unity, in the content pane (tick the checkboxes of all layers that should be visible). Afterwards you use the GP tool "Create Building Scene Layer Content" to create a SLPK file. And last you publis the SLPK file on your Portal or ArcGIS Online. Herefore I use the New Item tool on our portal. On this way you can create different configureations for one building and switch the different states later in Unity. For example, when I use the buildings in VR, I have to disable the doors, otherwise I would not be able to pass through them. I hope that information helps.

‎05-15-2023

OK, now I got it! I've set the right visibility in ArcGIS Pro before I publis the building scene Layer. Now the two building scene layer work with unity SDK. Thanks!

‎05-11-2023

Sure, this is a version of the building hostet on ArcGIS Online. It uses the same SLPK file as the one I use from my Portal. I've set it to public. The coordinate system used is MGI GK Austria Central EPSG 31255! https://tiles.arcgis.com/tiles/nBCbrJePiQreJMNb/arcgis/rest/services/BG20_BIM/SceneServer

‎05-10-2023

What do you mean by filtering by check the visibility settings? In Revit or in Pro? When loading the BSL to an empty scene or Pro scene, the building is displayed correctly.

‎04-10-2019

Can you please update the design of the Pop-Ups in WebApp Builder for the smartphone size views? The pop-ups look good on tablets or desktops (image Desktop_view.png and tablet_view.png) but they don't on smartphones (image smartphon_view_1.png and smartphon_view_1.png). And maybe the option to use the result as destination or origin for the directions widget can be reachable from the first page of the pop-up (on smartphones). (image smartphon_view_3.png) First Pop-Up page Second Pop-Up page

‎11-27-2018

Hi Michael, we do use ArcGIS Pro for some work, but we are dependant to some add-ons for ArcMap that don't exist for ArcGIS Pro yet. So ArcGIS Pro is not always an option. Greets

‎11-15-2018

Is it that far, that we think 6 seconds is fast. I have the exact same ArcMap installation on my server (the same where ArcGIS Server an Portal is running). Opening the ArMap Options or the layer properties needs less than a second. The system is running Windows Server 2008 R2, but there is not Office or AutoCAD installed. I think I'll get my selve a server OS on a VM to run ArcGIS ... But I get similar times on the test server that runs Windows 7 and ArcGIS 10.6.1 instead of ArcGIS 10.5.1.

‎09-20-2018

I have now set up a new machine with Windows 10 (our production image) and than installed all our needed software. After every installation step I've stopped the time it takes to open the layer properties. There is definitely a connection to other software products. ArcGIS --> 2 sec ArcGIS + GeoOffice Addon (has furher tabs in layer proberties) --> 4 sec ArcGIS + GeoOffice + AutoCAD --> 6 sec ArcGIS + GeoOffice + AutoCAD + Inventor --> 8 sec ArcGIS + GeoOffice + AutoCAD + Inventor + MS Office 2016 --> 14 sec The increase of time consumed to open the ArcMap options is similar to that, starting at about 5 sec and ending at about 27 sec with the full installation. It looks like there is a problem with shared DLLs.

‎09-14-2018

We have the same Issue using 10.5.1 on Windows 10. Using Windows 7 or Server, ArcMap works well. Is there a Issue Number from ESRI for this problem?

Online Status	Offline
Date Last Visited	2 weeks ago

My Ideas

Latest Contributions by MarkusWall1

Re: Add New Subtype to Subtype Group Layer

Re: Poor performance in Magic Leap 2

Re: Poor performance in Magic Leap 2

Report: Select features in map

Re: Transparency issue with local SLPKs?

Re: Building Scene Layer is not shown in Unity

Re: Building Scene Layer is not shown in Unity

Re: Building Scene Layer is not shown in Unity

Re: Building Scene Layer is not shown in Unity

Update Pop-Up Design in WebApp Builder

Re: ArcMap 10.5.1 Properties slow

Re: ArcMap 10.5.1 Properties slow

Re: ArcMap 10.5.1 Properties slow

Re: ArcMap 10.5.1 Properties slow

Re: ArcMap 10.5.1 Properties slow

Update Pop-Up Design in WebApp Builder

Re: ArcMap 10.5.1 Properties slow