POST
|
After messing around and talking to a GIS friend, in labels: Placement Prop.>Conflict Res>check Never Remove box This seemed to clear things up. It seemed the polygons were being labeled, but there was some sort of communication problem. Hope this helps. B
... View more
09-20-2012
11:17 AM
|
0
|
0
|
237
|
POST
|
I'm having the same issue. Zoomed in, the labels and expression appear correctly. But when zoomed out to where I need to print, some disappear. 70% I would say are there. I've tried messing with scale of the map also with smaller font, even to 2pt and geometry repairs on all the shape files I did another map of this same area with different labels and printed at the same scale that I need to print this one. Everything is labeled correctly. Let's try to figure this out as my boss is on my back about getting this map labeled.
... View more
09-19-2012
11:41 AM
|
0
|
0
|
237
|
POST
|
I applied the repair geometry feature to each shape file to no avail. Any other ideas? B
... View more
09-19-2012
05:21 AM
|
0
|
0
|
88
|
POST
|
Ok, so here is the expression I got to sort of work: "Open: " & ['Quick Leasehold Cursory 9-11-12$'.F2] & vbnewline & ['Quick Leasehold Cursory 9-11-12$'.F4] & vbnewline & "HBP: " & ['Quick Leasehold Cursory 9-11-12$'.F3] & vbnewline & "Competitor: " & ['Quick Leasehold Cursory 9-11-12$'.F5] & vbnewline & "# of Leases:" & ['Quick Leasehold Cursory 9-11-12$'.F6] I left out labeling the label, as the sections show like this: Open: CHK,oil co, oil co HPB: 640 This seems to work and will be sufficient but there are two issues: 1. The 2nd line where it says CHK etc is operator data, sometimes this string goes on having to list all the operators. Is there a way to stack these to make them appear cleaner on the map? 2. I gone round and round with the scaling but some of the labels wont appear at the scale i need to print the map. If I zoom into one that is not labeled, the label will appear with the correct expression. Help!
... View more
09-18-2012
01:38 PM
|
0
|
0
|
338
|
POST
|
snowcobra, Are you replacing the text inside the square brackets with the correct column names from your attribute table? You need to provide more detail on what you have tried, so we can work this out Regards Anthony Here is the current expression I've been using. "Open: " & ['Cursory Status - Colors 9-11-12$'.F2] & vbCrLf& "HBP: " & ['Cursory Status - Colors 9-11-12$'.F3] & vbCrLf& "Competitors: " & ['Cursory Status - Colors 9-11-12$'.F5] & vbCrLf& "# of Leases: " & ['Cursory Status - Colors 9-11-12$'.F6] The attributes that I need labeled are from an excel spreadsheet that I joined to the table. When I do a simpler expression, such as just showing Open and HBP the labels appear correctly, are stacked correctly, and are in the bottom left hand corner. When I add the Competitor column it all goes bad.
... View more
09-17-2012
01:13 PM
|
0
|
0
|
338
|
POST
|
When I used this expresion with the vbnnewline I'm getting an error message. The two links you sent, I used them already this morning trying to figure this out. Please help! snowcobra, First off all you will need to use a label expression (http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#//00s800000027000000.htm) to build up your label, along the lines of (where open,HBP,Operators and Competition are fields names): "Open: " & [Open] & vbNewLine & "HBP: " & [HBP] & vbNewLine & "Operators: " & [Operators] & vbNewLine & "Competition: " &[Competition] then you need to use maplex to position the label into the bottom left by using internal zones: http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#/Placing_labels_using_internal_zones/003s0000002n000000/ Regards Anthony
... View more
09-17-2012
12:39 PM
|
0
|
0
|
338
|
POST
|
snowcobra, First off all you will need to use a label expression (http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#//00s800000027000000.htm) to build up your label, along the lines of (where open,HBP,Operators and Competition are fields names): "Open: " & [Open] & vbNewLine & "HBP: " & [HBP] & vbNewLine & "Operators: " & [Operators] & vbNewLine & "Competition: " &[Competition] then you need to use maplex to position the label into the bottom left by using internal zones: http://help.arcgis.com/en/arcgisdesktop/10.0/help/index.html#/Placing_labels_using_internal_zones/003s0000002n000000/ Regards Anthony Thank you for the response, I will give this a try...
... View more
09-17-2012
12:23 PM
|
0
|
0
|
338
|
POST
|
Hey guys, I'm probably going to start posting here more often. Anyways, I need to create some labels for a land map. Our client would like the information for each section of land labeled like this, in the lower left hand corner of the square (section) Open: 480 HBP: 160 Operators: CHK C&J Operating Kirkpatrick Competition: N/A # of Lease: N/A I've gone through hours of trial and error with expressions trying to get this right. Any help would be greatly appreciated. B
... View more
09-17-2012
08:39 AM
|
0
|
12
|
990
|
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:23 AM
|