Latest Contributions by RamkumarNunduri

‎08-06-2017

Dear friends, I am using GE 10.5. I have tried to use GE intersector processor with incoming GE definition of polygon and the Geofence as point. The intersector processor does the intersection and appends the intersection point to the source GE definition as a json string i.e "{"x":<value>,"y":<value>}". How do i refer to these coordinates in the workflow after the intersector processor?

‎12-11-2016

Dear Esri Support, We are having ArcGIS Server 10.4 and ArcGIS Portal installed on the same system. There is an immediate requirement of having webappbuilder so I downloaded the Web AppBuilder 2.2 and tried to install it on a development system (IIS webroot directory). I followed the steps given in the installation of Web AppBuilder. The web appbuilder opens (http://mysystem:3344/webappbuilder) in the web browser (FF ver 46) asking to enter portal URL and AppID. I then logged into portal with portal admin privilege, in add item added the app (http://mysystem:3344/webappbuilder). The problem comes once i start registering the app. The error shown up in the dialog reads as follows: "unable to load https://<portalserver>/arcgis/sharing/rest/oauth2/registerApp status: 0" Note: In the firebug console window there is warning that CORS origin request blocked: The same origin policy disallows the remote resource at https://<portalserver>/arcgis/sharing/rest/oauth2/registerApp (reason: CORS header 'Access-Control-Allow-Origin' does not match 'http://<portalserver>, *' I tried making several attempts giving different redirect URIs but was not successful. It need to get this thing resolved immediately. Please Help Me. Ram Kumar.

‎10-31-2016

Roberts, I downloaded and installed the api again now on the same server system hosting the arcgis services. but the same error repeats. I read through the install.html page and noticed that unlike previous way of replacing "[HOSTNAME_AN_PATH...]" with the url to the api, there was string with <a> tag. Is this to be used the same as described. Our systems are in a private network so you may not be able to configure them online. I too strongly feel that i am missing some thing thats simple but can't make out at this point in time. SO, request your guidance in this regard. Ram Kumar.

‎10-31-2016

Roberts, I tried accessing the service with 3.16 api and it was working fine. Some thing strange? please advice. Ram Kumar.

‎10-31-2016

Roberts, I tried with the code you posted. I am still stuck with the same error. The only modification i did in your code was to add the full URL in hrefs and src attributes. Does this has to do anything with config CORS/proxy? Did you deploy your application on a different web server? please suggest me to diagnose this step by step. Otherwise i am already making too many modifications to troubleshoot. Ram kumar.

‎10-28-2016

Roberts, The code is as below. You may note that i was running this code using local installation of JS API 4.1 as mentioned in previous posts. The base map i used is arcgis server tiled map service (wkid:3857). <!DOCTYPE html><html> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <meta name="viewport" content="initial-scale=1, maximum-scale=1,user-scalable=no" /> <title>Test Map</title> <link rel="stylesheet" href="http://myserver/arcgis_js_api/library/4.1/4.1/dijit/themes/claro/claro.css" /> <link rel="stylesheet" href="http://myserver/arcgis_js_api/library/4.1/4.1/esri/css/main.css" /> <style> html, body, #ui-map-view { margin: 0; padding: 0; width: 100%; height: 100%; } </style> <script src="http://myserver/arcgis_js_api/library/4.1/4.1/init.js"></script> <script> var myMap, view; require([ "esri/Basemap", "esri/layers/TileLayer", "esri/Map", "esri/views/MapView", "dojo/domReady!" ], function (Basemap, TileLayer, Map, MapView){ // -------------------------------------------------------------------- // If you do not have public Internet access then use the Basemap class // and point this URL to your own locally accessible cached service. // // Otherwise you can just use one of the named hosted ArcGIS services. // -------------------------------------------------------------------- var layer = new TileLayer({ url: "http://myserver/arcgis/rest/services/...../MapServer" }); var customBasemap = new Basemap({ baseLayers: [layer], title: "Custom Basemap", id: "myBasemap" }); myMap = new Map({ basemap: customBasemap }); view = new MapView({ center: [-111.87, 40.57], // long, lat container: "ui-map-view", map: myMap, zoom: 6 }); }); </script> </head> <body class="claro"> <div id="ui-map-view"></div> </body></html>

‎10-26-2016

Robert, Frankly I did not use 4.0 api. The last i used was api 3.12. I see that the entire JS API has been restructured for ease of developers (as said). I checked the Map service (REST url) running on Win2008 server. That was getting accessed in my web browser. I would request you to give clarity on local installation of JS API 4.1 keeping the following: ArcGIS Server 10.4 running on Win2008 server with web adaptor configured on IIS. Development system uses IIS configured with JS API 4,1 on Win7. I have tried using view.then() to know the promise resolution. Also used try/catch to get any kind of error. But nothing happens after the error (mentioned in previous post) gets logged and later the Mapserver url get listed in console with response code 200 OK. Ram Kumar.

‎10-26-2016

I am new to JS API4.1. I tried installing it on a system with Windows 7 running IIS. The instructions given in the install.html were followed. But, the following error is seen in console after using the test API code given in the install.html page.that loads a custom basemap. I have tested the Map service that i was using and checked the JS API 4.1 init.js through web browser. All things seem to be working fine. The error reads as follows: TypeError: this._layerViewsMap.forEach is not a function. The JS API and the service URL are seen to be going through in the console window. Request for immediate responses. Ram Kumar. #4.1‌

‎01-27-2016

Dear ESRI Tech team, I observed the following regarding map rotation and adding ArcGIS Image Service layer and request your reply at the earliest. 1) The sample at Compass widget | ArcGIS API for JavaScript shows Map rotation and rotation happens perfectly. But this was with tiled base map. But as i keep adding vector layers does the map and features added on top rotate in sync. please clarify as it is the most important feature of interest and that observed was (in firebug) individual tiles are being styled with transform/translate. 2) The sample at Add an ArcGISImageLayer to a map - 4.0beta3 show a base map added with ArcGIS Image service as layer. But when rotation was applied by right click and mouse drag, though the map and image on top gets rotated but the image gets displayed with rectangular extents rather than filling up the entire map view (specifically when zoomed in). This is in correct as it gives a picture that image does not exist for the entire map view. Is it necessary that the image service to be a tiled one? Also, noted that when image service of ArcGIS service 10.0 was added (even with wkid:3857) the image does not get displayed. Please reply in detail. 3) When can we expect a full release of JS API 4.0? NOTE: Please reply me at ramkumaracharyulu@gmail.com as i was not able to edit my email id in my profile at https://community.esri.com/ Regards, N. Ram Kumar. Email: ramkumaracharyulu@gmail.com.

‎07-29-2011

Hi Philippe, I too got exactly the same problem. I am checking out to resolve it. By the way did you get any solution for the problem? Please do reply. Ramkumar.

‎07-18-2011

Dear Peter, I too get similar error . But, the exception is thrown when using the search page with 'SimpleAdapter`. When LDAP Adapter is used then neither there is a n exception thrown or the results come up. By the way i recently installed geoportal and did the smoke test successfully. I have also been able to publish metadata. Please share with me on any clue you get regd. the problem. Thank you Ramkumar.

‎06-03-2010

Hi Everyone, I just started using SFV. Its really great and cool. I was trying to modify the banner with the code sample available for collapsible banner that display coordinate readout as well. I loaded the banner.mxml into flex builder and compiled the project. Where do i search for banner.swf and if found how do i use it? Please help me out. Ramkumar.

Online Status	Offline
Date Last Visited	‎11-11-2020 02:23 AM

My Ideas

Latest Contributions by RamkumarNunduri

How to refer to the intersection point?

Web AppBuilder 2.2 register not working

Re: custom basemap not working 4.1 api

Re: custom basemap not working 4.1 api

Re: custom basemap not working 4.1 api

Re: custom basemap not working 4.1 api

Re: custom basemap not working 4.1 api

custom basemap not working 4.1 api

map rotation issue

Re: Compile geoportal.swf ?

Re: SEVERE error: Unable to create a new IdenityAdapter

How to use the New Banner sample for SFV?