POST
|
Hello. I am a newbie about deep learning and I was trying to run the "Detect Objects Using Deep Learning" tool to detect buildings in a tiff aerial image an I got an error (see below). I'm using ArcGis Pro 2.6.1. I followed the workflow successfully, meaning that I created the labeled objects, trained the model - no errors at these stages. When I tried to run the "Detect Objects Using Deep Learning" tool I got the following error message: "ERROR 999999: Something unexpected caused the tool to fail. Contact Esri Technical Support (http://esriurl.com/support) to Report a Bug, and refer to the error help for potential solutions or workarounds. Unable to prepare input raster(s) for the python raster function. The specified non-optional parameter doesn't have a value. [rasters] Failed to execute (DetectObjectsUsingDeepLearning)." For the export of training data i used the Meta data format: Labeled Tiles. Note that when I first ran the export i used the Pascal Visual Object Classes and i had no problem at all. I mean the tool of detection ran successfully but the results were not so good so i decided to change the Meta data format to Labeled Tiles and i saw that the Image chips were better than the first time but the problem as i mentioned was not able to run the last tool (detecting objects) In the following image are the parameters for the training model. This the error message with the parameters used. Can you help me please? Mike#
... View more
09-16-2020
03:23 AM
|
0
|
1
|
1303
|
POST
|
Thank you for answering my major question. Also does it matter if i don't change anything? I mean in the context of discovering the WFS services by another harvesting site?
... View more
01-13-2019
11:36 PM
|
0
|
0
|
650
|
POST
|
Hello. I need some help in the configuration of the Service Editor in ArcGIS for INSPIRE. Specifically I have a Datatheme with more than one stakeholder. I have published a single download service (WFS) but I also have created Data Metadata for each stakeholder regarding that Datatheme. How can I associated all stakeholder’s metadata with that WFS service? Below is a screenshot showing in the red box the values for one stakeholder. I don’t see any other way how to add the information for the other stakeholder. Maybe it’s not necessary? Am asking this because in the configuration of the View service, i can add all my stakeholders necessary info in order to associate the View service with the stakeholder's metadata.
... View more
01-08-2019
02:31 AM
|
0
|
2
|
1631
|
POST
|
Mr Burton hello again. I tried your script and i incorporated teo models of mine. Though it does work very nice when my data are a small amount of the original, when i use the SDE feature class where theere are around 1,5 million parcels then things get very difficult. I mean it takes a lot of time to show the values per field thus making it inconvinient to use. Any ideas how to improve the speed of the script? Thank you for you time and efforts Regards Mike
... View more
05-21-2018
04:37 AM
|
0
|
1
|
478
|
POST
|
Mr. Burton hello. THANK YOU so much for your help and effort. I gave it a first try and works perfect. I will make some more testings and i will let you know. Have a nice weekend. Regards Mike
... View more
05-11-2018
05:11 AM
|
0
|
0
|
478
|
POST
|
Mr Burton hello and thank you for your answer. Before contacting you, I did try to use the final code that you provided for the tool validator in the Conditional Drop Down Lists - Tool Validator, replacing "Forest" with "DIST_CODE", "HarvestArea" with "VIL_CODE" and "Setting" with "QRTR_NM_E". Also i replaced the py script with the one that you provided but there i didn't change anything, since "forestVal", "harvestVal", and "settingVal" where not refering with these names in the code before, so i assumed would be ok if i used the original. So after doing this i tried to run the script but i got the following screenshots. Forgive me for my ignorance but something that bothered me (and could be the problem), was the answer that you provided at the 21st of April and you had this code before the tool validator class block. Should i use this code in the py script merging it with the py code from your last comment? Don't use it at all? The reason that i want to make it a model is that i'm not familiar with programming. My department has two feature classes for parcels so i would like them to use the tool depending on what their need is. The column name and field types are the same for both Feature classes. I attached some test data. The fields that will be used based on ierarchy are DIST_CODE, VIL_CODE, QRTR_CODE, BLCK_CODE, SHEET, PLAN, PARCEL_NBR. Also I have two questions: 1. Will I be able to use this tool with an SDE Feature class that will have a joined table and some of the fields will be from that table? 2. Let's say that the script is ready with no problems, how will I use all the Values that the user selected to make them as one input for zoom in? The original tool that I found and used (ChooseFieldValueToolbox10.tbx) had one Value, one Output and that's why in my first post i used it twice in my model. Thanks again Mike
... View more
05-08-2018
11:05 PM
|
0
|
1
|
1326
|
POST
|
Mr Burton i didn't know how else to contact you regarding a similar issue that i have. I have posted my issue in the following url: https://community.esri.com/thread/213736-select-by-many-attributes-and-then-zoom-to-selected . I tried searching to find a solution but until today i haven't found or given a solution that actually works. If you could find the time and take a look at my request i would appreciate it. I already tried to alter the Tool validator with my columns based on the solution provided in your answer and added the new script tool (without changing anything) also from your answer within the current toolbox that i had but didn't work. Please i need your guidance. Regards Mike
... View more
05-07-2018
04:41 AM
|
0
|
0
|
1036
|
POST
|
Jake good morning. Ignore my previous answer. I couldn't see in my phone that you attached something. So today, i opened the zip file that you sent me and i used the "mymodel_test". Still doesn't working correctly. The values in the "Value(2)" drop down list shows all villages in the feature class regardless of the District Value selection. In the screenshot you can see from the attribute table that for the District Code = 3, the number of records are 8, but the drop down list in the model shows more than eight entities. Any more ideas? Thank you and regards. Mike
... View more
05-04-2018
12:06 AM
|
0
|
0
|
1326
|
POST
|
Jake hello. I saw your answer but I’m not at work to try it. Though if I understood correctly you did what I did and the model worked? Did I do something wrong? Please can you clarify this for me?
... View more
05-03-2018
10:12 AM
|
0
|
0
|
1326
|
POST
|
Hi Jake. Thanks for replying. I attached as a zip file the data that i mentioned in my last comment. Thanks again for your time and effort. Regards Mike
... View more
05-01-2018
10:55 PM
|
0
|
3
|
1326
|
POST
|
Jake hello. Thanks for taking the time to answer my question. First of all i would like to inform you that i found an error in my model. In the second "Select by attributes" in the expression there was an oversight. At first (screenshot 2 - first post), i wrote VIL_NM_E = '%Output Value% ' instead of VIL_NM_E = '%Output Value (2)% ' and there was something like a conflict with the first expression ("DIST_CODE" = %Output Value%). After that correction, my model still didn't populate the values in the second drop down list (Value(2)) based on the selected District and instead it showed all the villages but if i selected a district and one village that belonged to that district after running the model, ArcMap zoomed in to the selected feature, correctly (screenshot 4 and 5). Now if by a mistake i selected a village that it didn't belong to that district (due to the fact that i see all vilages from the list), instead of an error, ArcMap zoomed in to a different village that the one that i selected. That village as i noticed was the first village based on an alphabetical order, that belongs to the district that i previously chose (screenshot 6 and 7). Then i tried your recommendation (screenshot 8), but it didn't work at all. Also in the (Value(2)), i got only one value regardless the ditrict that i choose (screenshot 9). When i run the model i got an error (screenshot 10). In the "Make Feature Layer" expression, i used the expression from the first "Select by attributes", which was "DIST_CODE" = %Output Value%. I don't know what i might did wrong. I prepared some data containing a feature class called "Vill_selected", the script tool that my model is based on, my model that i run and a model based on your recommendation. How can i send them to you (if you want to give it a try)?
... View more
04-30-2018
01:04 AM
|
0
|
5
|
1326
|
POST
|
Hello. I need the help of the community and if possible the help of an ESRI’s staff. After days and days of searching and reading different posts in the net and many dead ends (broken links) in ESRI’s site, I couldn’t find a solution to my problem. My problem is that I’m trying to give a tool to some colleagues (ArcMap 10.5), that don’t have any experience with GIS software, which would help them to zoom to a selected parcel by selecting a value from various drop-down lists and not writing the SQL query themselves. The tool which I’m trying to build in Model Builder (coding is not my strong background), will take the following variables: District, Town/Village, Quarter, Block, Sheet, Plan, and Parcel Number. Combining all those variables make the parcel selection unique. Those Variables are different columns within a single Feature Class called “Parcels”. In my model I used a tool that I had from an old search (now is a broken link) called “ChooseFieldValueToolbox10.tbx”. This tool let me expose as a list, the values from a field. Then I found the code (that actually works) from another post in the community (https://community.esri.com/thread/8396 - thanks Paul Lang), to zoom to selected feature. Through my many failed attempts I decided to make the model (for testing purposes) with only one variable and not use all the aforementioned variables, just to see if it works, which it does (screenshot 1). For example the user to select a District or to select a Town as different models each time. The problem is when I want to make combination of all those parameters. I can’t force the model to select from current selection and then zoom to final selection. I attached a screenshot (screenshot 2) of my model, with the use of the first two variables (District and Town/Village). When I run the tool, at the interface (screenshot 3), the second selection (Value (2)) does not populate the values based on the first selection (Value), instead it shows all the values of the field (Field(2)), and then nothing runs as it supposed to do. For example if in the second “Select by attributes” tool (screenshot 2), I have as a “Selection Type = SUBSET_SELECTION”, nothing gets selected so the zoom doesn’t work. If in the second “Select by attributes” tool (screenshot 2), I have as a “Selection Type = ADD_TO_SELECTION”, it selects all the rows that have the same “Dist_code” and doesn’t take account the Town/Village. Sorry for the long post but I tried to make my problem as clear as possible. Any ideas?
... View more
04-27-2018
02:38 AM
|
0
|
14
|
2974
|
POST
|
Many failed attempts until i saw this answer. You saved me. Thanks.
... View more
04-27-2018
01:41 AM
|
0
|
0
|
918
|
Online Status |
Offline
|
Date Last Visited |
2 weeks ago
|