POST
|
I downloaded a free test version a few weeks ago. The tool is pretty neat, but for $1000 USD, I can get most of the table editing functionality I need out of ET GeoWizards/Tools for $250. However, I didn't get too deep into GISConnector, and can definitely see it's value for certain tasks. I had some issues with the download, and their staff was quick to respond (especially for having a 10 time diff with me out in CA) and totally top-notch.
... View more
01-21-2015
11:14 AM
|
3
|
1
|
594
|
POST
|
Yeah I'm looking at the network tab. I saw that Fiddler is free, and unfortunately that makes middle managers more likely to say no than if it was $1000. It took me weeks of fighting to get Google Earth installed I'm starting to think it has to do with the test server environment. I just found out that the last time it was used was 2012! The crossdomain.xml had mysteriously disappeared off that server years ago, so I wonder what else went missing...
... View more
01-14-2015
10:49 AM
|
0
|
0
|
819
|
POST
|
On no! New software does not go down well here...I am a consultant and do not even have access to update flash on my desktop (ironic since they hired me in part to help develop flex webmaps). I pulled up the developers console in Firefox to check network activity and there were no errors. Would Fiddler give me something that the developer console does not for this issue? If so I can pitch the case to my clients to let me purchase/download it.
... View more
01-14-2015
10:05 AM
|
0
|
2
|
819
|
POST
|
Unfortunately no. It's an internal tool for a state agency. So yeah, I don't even know how much help anyone can give without peeking under the hood...
... View more
01-14-2015
09:59 AM
|
0
|
4
|
819
|
POST
|
Hello everyone, I recently moved a copy of my flex app from one server to another. All files have been verified to have copied correctly. Everything looks identical, save for changes to the pathing for the new server. All other widgets, layers, and features work correctly. I am stumped. The test server was refreshed after I added in the crossdomain.xml...so the config .xml looks good, the server is running fine, I just don't know where else to go looking for answers. Any ideas are appreciated. Thanks! Matthew Weber
... View more
01-14-2015
09:52 AM
|
0
|
6
|
4877
|
POST
|
Ok, here is what I got from the REST endpoint check... It has both ObjectID and Shape.Length noted as fields...
... View more
11-17-2014
01:48 PM
|
0
|
2
|
550
|
POST
|
Those two fields are visible in the .mxd the service references, would there be somewhere else I would check to see if they are visible?
... View more
11-17-2014
01:35 PM
|
0
|
4
|
550
|
POST
|
The coordinate widget displays the current mouse location on the map. Maybe this is what you are looking for? I pasted the link to the widget below... ArcGIS Viewer for Flex
... View more
11-17-2014
01:29 PM
|
1
|
1
|
410
|
POST
|
I have a search widget that searches a dynamic layer containing 2 feature classes (in a grouped layer in the .mxd). I can get 1 of the layers to search correctly (called "Aliases" below), and clicking on the results zooms to their location and displays the popup. For the second layer ("Primary Streets"), it performs the search and returns the correct records, but clicking on a result does not activate the popup or zoom to the feature's location. Perhaps another set of eyes can find an error in my coding? Or maybe I am missing something else? Thanks for the help folks! My .xml for the search widget is: <layer> <name>Aliases</name> <url>http://XX.XX.XX/ArcGIS/rest/services/CCC_AliasTool_v10/MapServer/1</url> <expression>AliasName LIKE '[value]'</expression> <textsearchlabel>Search by Alias Name [ Example: Main Street or Main% ]:</textsearchlabel> <titlefield>Aliases</titlefield> <linkfield></linkfield> <fields all="false"> <field name="AliasName" alias="Alias Name"/> <field name="PriStName" alias="Primary Street Name"/> </fields> <symbol> <simplelinesymbol color="0x00FFFF" width="2.8"/> </symbol> <orderbyfields>AliasName ASC</orderbyfields> </layer> <layer> <name>Primary Streets</name> <url>http://XX.XX.XX/ArcGIS/rest/services/CCC_AliasTool_v10/MapServer/2</url> <expression>StreetName LIKE '[value]'</expression> <textsearchlabel>Search by Street Name [ Example: Main Street or Main% ]:</textsearchlabel> <titlefield>Primary Streets</titlefield> <linkfield></linkfield> <fields all="false"> <field name="StreetName" alias="Street Name"/> <field name="ExternalSt" alias="External Street Key"/> </fields> <symbol> <simplelinesymbol color="0x00FFFF" width="2.8"/> </symbol> <orderbyfields>StreetName ASC</orderbyfields> </layer>
... View more
11-17-2014
01:18 PM
|
0
|
6
|
2836
|
POST
|
Here is how it displays if added as feature layers (they are still grouped in the .mxd). I would like Amador to be a sublayer under Valley Division.
... View more
10-17-2014
11:00 AM
|
0
|
1
|
383
|
POST
|
Thanks Robert, So when I set the service type to feature, I cannot get my subgroups to display properly. The first layer in the group is "Valley Division" <layer type="feature" visible="true" label="Valley Division" url="http://d16-da/arcgis/rest/services/SWITRS_New_10/MapServer/0"/>This layer contains all the data in the sublayers below it in the group that comprise this division. The first sublayer in the group below Valley Division is "Amador" <layer type="feature" visible="true" label="Amador Office" url="http://d16-da/arcgis/rest/services/SWITRS_New_10/MapServer/1"/> The next sublayer is "Auburn" <layer type="feature" visible="true" label="Auburn Office" url="http://d16-da/arcgis/rest/services/SWITRS_New_10/MapServer/2"/> Now this format doesn't seem to work. I don't want to add all 50 layers individually, I would to keep them as layer groups. So users can view/search a whole division, or drill down into the smaller area office geographies. When I set the search widget to <url>http://d16-da/arcgis/rest/services/SWITRS_New_10/MapServer/0</url> it gives me the same error as the one in my original posting. So again I think the problem is in using the grouped layers, but maybe not, I defer to you great wisdom... If there is an more info I can provide, screenshots of the viewer or the .mxd etc, let me know.
... View more
10-17-2014
10:52 AM
|
0
|
2
|
383
|
POST
|
I am working with grouped layers for the first time in FlexViewer 3.6. I have an .mxd with several (about 50) layers set into 7 groups. While I can get everything to display nicely in the TOC, I cannot get the search tool to function correctly. I think it has to do with the use of sub-layers, as dynamic layers are new to me and I'm fumbling my way through (ESRI does not provide much of info on their use, or maybe I'm just a goober). When I fire up the Search widget, I get an E0011E: Invalid feature layer error. My main config file looks like this: <operationallayers> <layer type="dynamic" visible="true" label="SWITRS Incidents" url="http://d16-da/arcgis/rest/services/SWITRS_New_10/MapServer/"/> <sublayer id="0"/> </operationallayers> I find it strange that by setting a single sublayer, I can see all the layers/groups in my .mxd. I thought I would have to set a sublayer for each... The .xml for the search widget is: <layers> <layer> <name>Valley Division</name> <url>http://d16-da/arcgis/rest/services/SWITRS_New_10/MapServer/</url> <expression>COLLISION_ LIKE '%[value]%'</expression> <textsearchlabel>Search by Incident Date [ Example: 6/7/2006 or %2009]</textsearchlabel> <titlefield>SWITRS Incidents</titlefield> <fields all="false"> <field name="PRIMARY_RD"/> <field name="SECONDARY_"/> <field name="COLLISION_" alias="Incident Date"/> <format dateformat="shortDate"/> </fields> <symbol> <simplemarkersymbol color="0xFF0000" size="5" style="circle" /> </symbol> </layer> </layers> So anyone see anything wrong right off the bat? Am I using dynamic layers or grouped layers incorrectly? Do dynamic layers even work with the search tool? Any advice on using dynamic and grouped layers is greatly appreciated. Thanks! Matthew Weber
... View more
10-17-2014
10:19 AM
|
0
|
4
|
2842
|
POST
|
I'm sure you already know this Mr. Scheitlin, but you are awesome. Thanks for being king of the Flex forum! One note/question though, I have never set the sublayer id for a dynamic service before. I have set things up like this... <layer label="Line Beats" type="feature" visible="false" alpha="1" url=xxx.xxx.xxx/ArcGIS/rest/services/CCCT_Dev_GISSU/FeatureServer/0" popupconfig="popups/PopUp_Line_Beats.xml" /> ...where I have the order of the features set directly (in this case ".../Feature/0"). Is the <sublayer> only necessary for dynamic layers?
... View more
10-01-2014
09:42 AM
|
0
|
1
|
385
|
POST
|
Using Extent—ArcGIS API for Flex | ArcGIS for Developers This link is for the API but maybe it can help? ArcGIS Viewer for Flex This link is for the main config file. Scroll down the the section about the <lods> tag. It seems to deal with extent. Don't know if these will help, but hopefully they are steps in the right direction.
... View more
10-01-2014
09:33 AM
|
0
|
1
|
207
|
Title | Kudos | Posted |
---|---|---|
3 | 01-21-2015 11:14 AM | |
1 | 11-17-2014 01:29 PM |
Online Status |
Offline
|
Date Last Visited |
11-11-2020
02:24 AM
|